Versa System

Versa System
•
•
•
•
Converts existing sections into multiple width sections
Works with Standard or Heavy Duty Systems
Regular and Heavy Duty Versa supports standard loadcapacity of a 48”W system, 12,000 in-lbs
Accepts most standard Lozier Shelves and Accessories
Versa System Ordering Information:
•
•
•
•
Order Heavy Duty Versa when existing section is Heavy Duty
Versa Half Splicer ordered separately as needed to splice Hardboard Backs(see pg. 143)
System Includes:
Versa Uprite
Versa Spanners
Versa Top Rail
Half Splicer Rail (where applicable)
Versa Bottom Spanner
Bottom Rail Support
Backs must be ordered separately, (see pg. 130-131)
EXAMPLE PART NO.
VS
4/29/14
72 3
H H
VS = Versa System:
“VS” to fit Standard Duty
“VSH” to fit Heavy Duty
4 = Section Width: 3’ or 4’
72 = Section Height:
36”, 42”, 48”, 54”, 60”, 66”,
72”, 78”, 84”, 90”, 96”
3 = Quantity of Versa Sections:
2, 3, or 4
H = Spanner Style:
“H” Hardboard
“S” Slotwall
H = Opposite Back Style
“H” Hardboard
“_” Omit if other
142
4
STANDARD FINISH:
P LT P T D P LT P LT
PLT •
•
PTD •
PLT •
•
PLT •
•
*
Uprite Finish
Optional Tier I & II colors
Spanner finish (PTD only)
Side A Rail finish
Optional Tier I & II colors
Side B Rail finish
Optional Tier I & II colors
Only required for sections
78”H or taller and with Hardboard
selected on the opposite side.
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882
This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction,
© 2014 Lozier® Corporation distribution or use is expressly prohibited.
Versa System Configurations
Versa System Configurations
• Available 36”H to 96”H
• Slotwall on Versa side only. Slotwall not compatible on backside of Versa Section.
• Order Versa Half Splicer for Hardboard Backs on Sections, 78”H & taller (pg. 145).
• For Hardboard Back ordering information (see pg. 130)
• For Slotwall Back ordering information, (see pg. 131)
Configurations:
36”W
48”W
143
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882
This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction,
distribution or use is expressly prohibited.
© 2014 Lozier® Corporation
4/29/14
Versa System Components
Versa Uprite
• Versa Uprites attach to Versa Spanner
• Heavy Duty Uprite has same load capacity of Standard Duty Uprite
EXAMPLE PART NO.
VU
36
STANDARD FINISH:
P LT
• Optional Tier I & II colors
VU= Versa Uprite:
“VU” to fit Standard Duty
“VUH” to fit Heavy Duty
36 = Section Height: 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”
Versa Spanner
• Order quantity determined by height of Versa Uprite
•Order:
Hardboard Slotwall
2 for 36”H - 72”H 1 for 36” - 42”
3 for 78”H - 96”H 2 for 48 - 72”
3 for 78 - 96”
EXAMPLE PART NO.
VS
3
STANDARD FINISH:
PTD
VS = Versa Spanner
3 = Section Width: 3’ or 4’
144
4/29/14
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882
This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction,
© 2014 Lozier® Corporation distribution or use is expressly prohibited.
Versa System
Versa Top Rail:
•
•
•
•
Accepts Extension Uprites
Replaces WEDER_ on Wall End Display
Replaces WEDGR_ on gondola when used in conjunction with VWEDCON
Top Slot of Uprite is not usable
EXAMPLE PART NO.
VTR
3
VTR= Versa Top Rail
“VTR” to fit Standard Duty
“VTRH” to fit Heavy Duty
3 = Section Width: 3’ or 4’
STANDARD FINISH:
P LT
• Optional Tier I & II colors
Versa Wall End Connector:
•
•
•
•
Use with Versa Top Rail (VTR_), order Versa Top Rail separately
Anchors wall end display to a Versa Island Section
Use for No Base WED applications
Required when WED or CED with or without Versa configuration has unacceptable freestanding height to depth ratio
PART NO.
VWEDCON
STANDARD FINISH:
P LT
• Optional Tier I & II colors
Wall End Positioner Bracket, for Top Cap
•
•
•
•
Maintains End Display position
For use on End Displays with acceptable free standing height to depth ratio only
Installs over Versa Top Rail (VTR_ )
For ordering information see pg.310
145
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882
This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction,
distribution or use is expressly prohibited.
© 2014 Lozier® Corporation
4/29/14
Versa System
Versa Half Splicer Rail:
• Used with two piece Hardboard Backs, Sections 78”H & taller
STANDARD FINISH:
EXAMPLE PART NO.
VHS
P LT
1
VHS = Versa Half Splicer Rail
1 = Width: 6”, 1’, 16”, 18”, 2’, 30”, 32”, 3’, 42”, 4’
• Optional Tier I & II colors
Versa Bottom Spanner:
HARDBOARD
SLOTWALL
EXAMPLE PART NO.
VBS
3
STANDARD FINISH:
P LT
BS=Versa Bottom Spanner
V
“VBS” Hardboard
“VBSS” Slotwall
3 = Section Width: 3’ or 4’
• Optional CHR
Bottom Rail Support:
• 1 required for every section
EXAMPLE PART NO.
BBRS
STANDARD FINISH:
G LV
BBRS=Bottom Rail Support
146
4/01/14
P.O. BOX 3448 • OMAHA, NEBRASKA 68103-0448 • (800) 228-9882
This is a copyrighted work of Lozier Corporation. Any unauthorized reproduction,
© 2014 Lozier® Corporation distribution or use is expressly prohibited.

Download Report