GKN Aerospace Sweden AB in Clean Sky and Clean

GKN Aerospace Sweden AB in Clean Sky and Clean Sky 2
Robert Lundberg
The information contained in this document is GKN Aerospace Sweden AB Proprietary information and it shall
not – either in its original or in any modified form, in whole or in part – be reproduced, disclosed to a third party,
or used for any purpose other than that for which it is supplied, without the written consent of GKN Aerospace
Sweden AB. The information contained in this document may also be controlled by export control laws.
Unauthorized export or re-export is prohibited. Any infringement of these conditions will be liable to legal action.
GKN in Clean Sky
GKN is Associate in SAGE (Sustainable and Green Engines)
Strategic partner for the whole project
10110 Rev. 18
Engine demonstrators
GKN Aerospace Sweden AB Proprietary Information. This information is subject to restrictions on first page.
2
GKN in Clean Sky - SAGE
GKN responsibility
SAGE2 (Snecma lead) – Rotating frames for Open Rotor engine demonstrator
SAGE3 (Rolls-Royce lead) – Intermediate Compressor Case (ICC) for
3-shaft engine demonstrator
SAGE4 (MTU lead) – Turbine structure
for Geared TurboFan engine demonstrator
10110 Rev. 18
SAGE 3 ICC testing
GKN Aerospace Sweden AB Proprietary Information. This information is subject to restrictions on first page.
3
GKN CfP topics
HITECAST – HT superalloy casting
HITNIFO – HT superalloy forging
LEAN – steel casting (Swerea SWECAST, TPC)
VIMAQ – steel sheet forming (Gestamp Hardtech)
WELDMECS - modeling of weld cracking (Univ West)
WELDMINDT – NDT/thermography
HIMMOVAL- high material rate machining
HICTAC – high temperature resin (Swerea SICOMP, Nexam)
HOSTEL – high temp acoustic panels (Creo Dynamics, KTH)
GOTA – high temp Ti alloy development
LIFEMOD - probabilistic lifing method (Swerea KIMAB, SP)
FAMEC – mechanical testing of HT Ni-alloy (Swerea KIMAB)
10110 Rev. 18
GEOVAR – geometry assurance simulation (Chalmers)
GKN Aerospace Sweden AB Proprietary Information. This information is subject to restrictions on first page.
4
Clean Sky 2
GKN will apply for Core Partnership (CoP) in Engines ITD
Strategic partner for the whole project
Call 1 closes 15 October
10110 Rev. 18
Call 2 closes May 2015
GKN Aerospace Sweden AB Proprietary Information. This information is subject to restrictions on first page.
5

Download Report