Submittal - Tamas Hydronic

Submittal
for
200,000 Btu Snowmelt System
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Table of Contents
Index
Introduction............................................................................................ 1
Tamas Heat Exchangers....................................................................... 2
Tamas Snowmelt Components............................................................ 3
Tamas Lockable Enclosures................................................................ 4
UPS 26-99 Pump Specifications.......................................................... 5
UPS 15-58 Pump Specifications.......................................................... 6
HBX Snowmelt Control......................................................................... 7-8
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Introduction
200,000 Btu Submittal - Page 1 of 8
Job or Customer :
Location :
Engineer :
Complies with Spec
Alternate
Notes :
Contractor :
Tamas Rep :
Submitted By :
Date :
Approved By :
Date :
P.O. Number :
Date :
Description
The Tamas Snowmelt Panel, in conjunction with the snowmelt control, socket, and sensor, utilizes optics rather than continuity
based on/ off sensors. This method of snowmelt detection allows for great efficiencies and set point controllability.
The control on the panel measures slab temperature, as well as boiler loop temperature to ensure the return water going back to
the boiler does not shock the boiler heat exchanger.
The snowmelt system pump is piped independently from the boiler loop so that the only head loss that needs to be calculated in
the system is the piping from the panel to the manifold, and the loops in the slab. This feature allows for higher flow rates and
head losses if needed, which in turn expands the range of pumping ability for the system pump.
Nominal Panel Output
QTY
Model #
BTU R
T-SM-HBX-200 HX 50 000
j
UPS-26-99
UPS-26-99
xchanger Snowmelt Control
UPS-15-58
LA14-20
Technical Data
HBX SNO-0500
Standards / Listings
CSA C22.2 No. 14-95
UL 598A
ETL No. 3032227
Balancing Valve..................................................................................... 1 1/4”
CV Value................................................................................................. Min. 2.7 Max. 15.2
Material: Backpan.................................................................................. Stainless Steel
Material: Lockable Enclosure............................................................... Stainless Steel
Piping Connections............................................................................... 1 1/4" FNPT
Power Supply......................................................................................... 110V (AC) Max Current 6amp
Temperature Control Method............................................................... Injection Controlled
Max Ambient Temperature................................................................... 120 F (49c)
Max Water Temperature....................................................................... 200F (93c)
Piping..................................................................................................... 1 1/4" Copper Type L
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Tamas Heat Exchangers
200,000 Btu Submittal - Page 2 of 8
HEAT EXCHANGERS CALCULATION SHEET
PROJECT DATA SHEET
Heat Load
200000.00 BTU/h
LMTD
67.0 deg. F
Min. Oversizing
0%
Hot Side
Cold Side
water
glycol (propylene) 50%
Fluid
Inlet Temperature
190.00 deg. F
69.00 deg. F
Outlet Temperature
155.00 deg. F
139.00 deg. F
Mass Flow
5714.45 lb/h
3262.98 lb/h
Inlet Volume Flow
11.79 USGal/min
6.27 USGal/min
Outlet Volume Flow
11.64 USGal/min
6.44 USGal/min
Max. Pressure Drop
14.50 psi
14.50 psi
HEAT EXCHANGER SELECTION
Heat Exchanger Type
LA14 - 20
# of Units Parallel
1.00
Heat Transfer Area
2.6 ft2
Fouling Factor
0.000010 ft2hf/BTU
OHTC Clean
1162.0 BTU/ft2hf
OHTC Fouling
1148.4 BTU/ft2hf
Oversize
1.2 %
Hot Side
Calculated Pressure Drop
Heat Transfer NTU
Cold Side
5.5 psi
2.5 psi
-
-
PHYSICAL PROPERTIES
Hot Side
Cold Side
water
glycol (propylene) 50%
Fluid
Pressure
Reference Temperature
Density
30.0 psig
30.0 psig
172.5 deg. F
104.0 deg. F
60.846 lb/ft3
Heat Capacity
63.989 lb/ft3
1.0 BTU/lbF
0.876 BTU/lbF
Thermal Conductivity
0.382 BTU/fthF
0.218 BTU/fthF
Dynamic Viscosity
0.366 cP
2.792 cP
Dimensions: mm (inches), NP = ‘Number of Plates’
A
B
C
D
194 (7.6)
80 (3.1)
152.4(6)
39.9(1.57)
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
F
10.0 +
2.3NP(0.39+
0.09NP)
K1
K2
K3
K4
3/4"
3/4"
3/4"
3/4"
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Tamas Snow Melt Components
200,000 Btu Submittal - Page 3 of 8
7
1
3
4
2
Boiler
Supply
11
Boiler
Return
9
6
5
8
System
Return
10
System
Supply
Item Description
Item Description
1
Galvanized Steel Backplate
7
HBX Controls SNO-0500
2
Solid Steel Cover
8
1” Air Eliminator
3
Tamas Control Box
9
Balancing Valve
4
24V Transformer
10
UPS-26-99 System Pumps
5
UPS-15-58 Injection Pump
11
UPS-26-99 Boiler Pump
6
Brazed Plate Heat Exchanger
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Tamas Lockable Enclosures
200,000 Btu Submittal - Page 4 of 8
Dimensions:
24.291
9.134
13.459
33.035
27.425
35.957
13.515
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
200,000 Btu Submittal - Page 5 of 8
UPS 26-99FC/BFC SUPERBRUTE
30
Without Check Valve
HI
25
With Check Valve
MED
Head (ft.)
20
15
LOW
10
5
0
0
5
10
15
20
25
30
35
Flow (GPM)
Flow range:
Head range:
Motors:
Maximum fluid temperature:
Min. fluid temperature:
Maximum working pressure:
0 - 34 U.S. GPM
0 - 30 FEET
2 Pole, Single Phase
230°F (110°C)
36°F (2°C)
145 PSI
B
C
A
MODEL
115V
230V
VOLTS
Spd. 3
Spd. 2
Spd. 1
Spd. 3
Spd. 2
Spd. 1
Model Type
UPS26-99FC/BFC
AMPS
1.8
1.5
1.3
0.9
0.8
0.7
A
6 1/2
B
6
WATTS
197
179
150
196
179
150
C
4 7/8
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
HP
1/6
1/6
1/6
1/6
1/6
1/6
D
3 1/2
CAPACITOR
20mF/180V
20mF/180V
20mF/180V
5mF/400V
5mF/400V
5mF/400V
E
3 7/16
F
3 5/32
E
D
F
Connection Type and Size
GF 15/26 Flange - (2) 1/2" Dia. Bolt Holes
Approximate
Shipping Wt.
(lbs)
10.3
Custom, Reliable Hydronic Systems
www.tamashydronic.com
200,000 Btu Submittal - Page 6 of 8
UPS 15-58 3 Speed Pump
Performance
HI
MED
LOW
HI
MED
LOW
230o F
150o F
36oF
10 Bar
Max fluid temp (closed system)
Max fluid temp (open system)
Min fluid temp
Max system pressure
Approvals
ETL
NSF Std 61
Annex G
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
HBX Snow Melt Control
200,000 Btu Submittal - Page 7 of 8
HBX Control Systems Inc.
HBX Control Systems Inc Specification
0
SNO-050
Part 1: SNO-0500 Product
1. The Control must be capable of utilizing a multi-color
backlight display.
2. The Hydronic Control must be a full microprocessor
control with at least an 8-bit, 8MHz integrated microprocessor chip.
3. The Control must be capable of the following
Input/Output Functions
a. 1 x Demand Inputs /Dry contacts
DEMAND
(S)
THERM
4
1 2 3
BOILER
5 6
SNOW
SENSOR
10
7 8 9
1/2
RELAY
13
11 12
POWER
16
14 15
b. 1 x Boiler/BMS Output Relay
c. 3 x Temperature Sensor Inputs
i. System/Return
ii. Slab Sensor
iii. Outdoor Air Temperature
d. 2 x Output Relay (Pumps or Valve)
e. 1 x Optical (digital) Snow sensor input
4. The Control must be capable of automatically calculating and resetting the system fluid target temperature based on
the user defined system delta T for slab protection.
5. The Control must have the ability to program and control for Warm Weather Shut Down, and Cold Weather Shut
Down.
6. The Control must be capable of operating a PMIp injection pump or a floating action valve for mixing purposes.
7. The Control/unit must operate using single dial operation
8. The Control must also be capable of utilizing feedback from optical snow sensing technology with integrated slab
temperature sensing.
9. The Control must have adjustable Instant Intensity and Constant Intensity snowfall conditions to allow for snow and
ice detector tuning.
10. The Control unit must be ETL approved.
Acceptable Products
1. HBX SNO-0500 Control
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
HBX Snow Melt Control
200,000 Btu Submittal - Page 8 of 8
Part 2: Technical Data, Main Parts & Labels
Inputs/Outputs:
2 x Thermistor Input (10K Ohm)
1 x Boiler/BMS Dry Contact (120 VAC, 2A) Output
2 x Relay Dry Contact (240VAC, 10A) Outputs
1 x Optical Snow & Ice Detector / Slab sensor Input
1 x Dry Contact Demand Input
Product Dimensions:
Side View
Front View
70mm
17
66mm
Power supply:
120 VAC, 10A (protected by integrated fast acting fuse)
168mm
Supplied Parts:
1 x HBX 029-0022 – 10K Ohm Thermistor, 12” lead wire
1 x HBX OUT-0100 – 10K Ohm Outdoor Sensor
Dimensions:
3.94” x 6.61” x 2.76” (100mm x 168mm x 70mm)
100mm
ETL Listings:
Meets CSA C22.2 No. 24
Meets UL Standard 873
ETL Control No. 3068143
Rear View
Top View
Storage:
50°F to 104°F (10ºC to 40ºC)
Terminal Block Labels:
Bottom View
63.2mm
86mm
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
Notes
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
Custom, Reliable Hydronic Systems
www.tamashydronic.com
T a m a s H y d r o n ic S y s t e m s In c .
4516 112 Avenue SE
Calgary, Alberta T2C 2K2
www.tamashydronic.com

Download Report