Brown Gas / HHO - SN Green Energies

BROWN GAS /HHO
ENERGY SYSTEM
TECHNOLOGY
SN
International
Powers, LLC
INTRODUCTION
SN International Powers, LLC’s (SNI) Brown Gas Generator
efficiently converts water into energy by electrolyzing water into
hydrogen and oxygen to make Brown Gas by using a patented
protrusion style electrolytic cell which enhances its electrolysis
efficiency by air cooling of a protruded electrode plate.
WHAT IS HHO WATER GAS
 HHO Water Gas:
 SNI’s HHO Water Gas Generator produces 1,860 Liter Gas from 1
liter of water and approx. 267 Liters per KWh
 SNI’s Water Gas is a patented, renewable, manmade fuel from
water and Water Gas is composed of 2H2 +2O.
 HHO Water Gas can be mixed with Fossil Fuels and Bio Fuels like
Coal, Furnace Oil, Wood and Rice Husk increasing energy
efficiency by 10-50% and reducing Pollutants (Emissions) by 8090% without major Infrastructure Cost
MAIN FEATURES OF HHO WATER BROWN GAS
① Safety
- Can be used at low pressures (0.1 ~ 2.0 kgf/㎠) without storage
② Clean energy
- Composed of 2H2 +2O.
- When burned, HHO Gas turns back into water again.
③ Ultra High temperature and fast rate of combustion
Temperature of any objects can reach above 1,900℃ within 3 sec.
High Efficiency of Energy
When producing HHO Gas by using our system, 2.3㎾/㎥ of electric
power is consumed, while other companies consume 3.5~4.2㎾/㎥ of
electric power .
USAGE
 HHO Water Gas is used in the fields
of :






Gas Welding
Gas Cutting of Metal
Brazing, Soldering
Glass Process
Gold Silver Jewelry Works
Water Fuel for Industrial Boiler, Heating
Furnace, Incinerator Melting Furnace,
Drying Plant
 BTU increase of fossil fuel power plant
 Fuel for Engine and prime mover
VALUE ADDED APPLICATIONS
FOSSIL FUEL
Brown Gas
KEY STATISTICS
Fossil fuel-fired electric power plants constitute the largest source of
air pollution in the U.S. (Information based on real data from DOE
sources). Here are some striking facts about power plant pollution:
The U.S. uses fossil fuels to generate more than 2/3 of its
electricity. 51% is generated with coal, 15% is generated with natural
gas, and 3% is generated with petroleum.
In 1999, electric power plants produced approximately 2.2 billion
tons of carbon dioxide, 12 million tons of sulfur dioxide, and 7 million
tons of nitrogen oxides.
The average coal-fired power plant is only 1/3 efficient, meaning
2/3 of the energy in the fuel is wasted.
On average, power plants that are subject to New Source Review
requirements emit much less sulfur dioxide per megawatt-hour of
energy produced.
HHO WATER GAS:
Added to Coal Will Reduce Air Pollutants (Flu Gas Emissions) by 80-90%
BROWN GAS WITH RICE HUSK BOILER
ENERGY INFORMATION ADMINISTRATION
According to the EPA forecasts of new and
future power plant technologies
The best that these technologies can and do
offer for coal powered efficiency is only a
50-55% energy efficiency rating.
This relates to a 45% to 50% loss of
efficiency and subsequently a loss of
efficiency and money for the Power Plants
Divide the last column numbers by 3,412, the
number of BTUs per One Kw of Power
Generation)
SUMMARY OF BENEFITS
Production
Increased BTU content
You may now utilize Pakistani
coal while achieving a better burn
utilization
Approx. 30% increase in
energy efficiency from the same
amount of coal.
HHO Water Gas will be a cost
plus savings when incorporated at
your plant location.
HHO Water Gas technology
does not require a major cash
investment and operates at a far
lesser cost than other production
enhancement technologies.
Clean Air Benefits
Eliminates up to 80% to 90%
of smoke stack emissions without a
major retrofit expense as with
other clean air technologies.
Can save millions in costs and
potential clean air fines.
Builds good relations with the
community where you are located.
Utilizes liquid wastes produced
by the facility for feedstock.
METAL CUTTING
With HHO Gas
ADVANTAGES OF HHO FOR WELDING WORK:
1. Operation is convenient:
The Brown Gas Generator / HHO Gas Generator produce oxyhydrogen gas and gas cylinder is no longer required. Live Feed: Turn
Generator on and immediately produce HHO Gas and turn
Generator off when finished cutting. Machine will shut down
automatically when the gas pressure is too high (e.g., if gas output is
not used). Machine will turn on automatically when the gas pressure is
too low. The gas output is adjustable on all Generators.
2. Welding is fast:
The Hydro Oxygen flame temperature is high, up to 2800 degree, it
can heat the welding spot to melting point very quickly (in less than 2
seconds) to finish welding.
ADVANTAGES OF HHO FOR WELDING WORK:
3. Welding precision is high:
The flame is concentrated, it can achieve welding of precise devices.
Close to plasma or laser quality cut.
4. Welding spot is smooth and beautiful:
Oxy-hydrogen flame combustion does not form carbide, so there is no
black spot, eliminating the second treatment of cleaning and polishing.
5. Environmentally friendly:
Brown Gas Generator / HHO Gas Generator's fuel comes from
water and there is water vapor after combustion, with no negative
environmental impact.
KINDS OF BROWN GAS BURNER
Brown Gas Flame
Temp Measuring
Melting Burner
Fossil Fuel Flame
Cutting Burner
Heating Burner
APPLICATIONS
Premix Combustion System with PG and Liquid Fuel
Small amount of moisture which is generated from the Brown Gas
Generator, Brown Gas and Liquid fuel are premixed in the premix
nozzle.
While burning, most of the moisture caught in liquid fuel is exploded
because of hot temperature and division of liquid fuel into small mist.
FIRE COMPARISON HO VS[HO+BG]
Fuel
Heavy oil + BG
Heavy oil
Width
250-300mm
300-350mm
Length
1600mm
1200mm
Features No soot
Generated soot
Fire is Strong
Fire is spread and weak
Bright white fire color
Blackish red fire color
KOSHIN SERVICE FACTORY IN JAPAN
HHO HYDRO-OXYGEN GAS GENERATOR
AS METAL CUTTING MACHINE
1. Maximum Safety --Steady, reliable fuel delivery. Fuel is available
immediately after machine is switched on. No gas cylinder used which
can rupture or explode. --Multiple safety devices, including
overheating and insufficient water cut-off switches, will automatically
turn off power to insure the safety of both equipment and user.
2. Environmentally Friendly --The Hydro-Oxygen Gas Generated
burns completely without creating pollutants, toxic fumes, or public
nuisance. –HHO Gas Generator does not generate hydrocarbons,
carbon monoxide, or carbon dioxide.
3. High Mobility –SNI’s Hydro-Oxygen Gas Generator come
equipped with wheels to facilitate moving the generators to the job,
not the other way around. –SNI’s HHO Gas Generator immediately
generates fuel as needed, no need for dangerous gas cylinders. -Fuel can be used for long periods of time without overheating
peripheral equipment.
HHO HYDRO-OXYGEN GAS GENERATOR
AS METAL CUTTING MACHINE
4. High Temperature & high-energy -- Calorific value is
34000Kcal/kg. -- The Oxy-hydrogen flame temperature is over
2800c, it is straight, less heat loss and highly efficient. It can melt
refractory metals and none-metals
5. Low Cost & Maximum Economy --Hydro-Oxygen gas is both
economical and practical and is generated using only electricity and
pure water. The cost of electricity and water is reduced by more than
40% compared with LPG, Propane, and Acetylene fuel.
6. Low Heat Loss --Use of Hydro-Oxygen fuel provide a more
focused heat source with less heat loss, maintaining more comfortable,
safer and lower fatigue working environment.
HHO HYDRO-OXYGEN GAS GENERATOR
AS METAL CUTTING MACHINE
7. Catalysis characteristic --Hydrogen is an active catalyst which can
be mixed with air to feed in to catalyze and combust all solid, liquid,
gas fuel. It also can speed up the reaction process and promotes
complete combustion.
8. Producing HHO Water Gas on site -- can supply gas as demanded
on site by adopting advanced automatically controlled technology
with no gas storage, no pressure bottle and no transportation.
9. Wide application range -- is suitable for all industries which need
fuel gas to do flame processing, especially flame cutting, flame
welding, heating, melting or incineration.
CUTTING FACE BY HHO WATER GAS
Replacing cutting equipment's fuel (LNG
+ preheat oxygen) to HHO Brown Gas
is to increase cutting speed, to narrow
cutting loss, to decrease dust, to improve
environment and to reduce production
cost.
1. The cutting demonstration is made
with OH-10000 Oxy Hydrogen Water
Gas Generator for the steel plate of
130T – 300T
2.The left side is to show auto cutting of
plate and right side shows very clean
cutting face
3. A high efficiency and large capacity
of Brown Gas generator by a new
electrolytic cell with air cooling of
electrode plate make it possible to mass
producte HHO Gas.
HOT SLAB CUTTING AT POSCO
CUTTING COMPARISON
OF 250MM HOT SLAB CUTTING
COMPARISON OF CUTTING SPEED
[LNG VS. BG]
CUTTING BY HHO BROWN GAS
CUTTING EXAMPLE 800 MM
SCM-550T COMPARISON
OF CUTTING LOSS [ LNG VS. BG]
CUTTING EQUIPMENT USING BROWN GAS
ENVIRONMENTALLY FRIENDLY
SIDE SURFACE MELTING SYSTEM
THANK YOU
SN International Powers, LLC
2245 Texas Drive, Suite 300, Sugar Land, Texas USA 77479
Phone: 001-816-651-8172
Email: [email protected]

Download Report