Lutron Hospitality Guestroom Controller SPEC (369708)

Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 1 11.14.2014
Guestroom Control Unit
The LutronR Hospitality Guestroom Control Unit
coordinates lighting, shades/draperies, and
temperature control in a hotel guestroom. It can
interface with the hotel Property Management System
(PMS) and Building Management System (BMS).
Guestroom lighting, shades/draperies, and
temperature control can be automated for guest
comfort when the room becomes occupied and for
energy savings when the room is vacant. The LutronR
Hospitality Guestroom Control Unit can integrate with
third-party systems via the onboard Ethernet link.
Guestroom Control Unit
GCU-HOSP
Model Number
lutron.com
GCU-HOSP
+ 1.800.523.9466
+ 44.(0)20.7680.4481
243C IND. CONT. EQ.
IEC PELV / NEC® Class 2
Assembled in U.S.A.
50015757 Rev. A
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
1
Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 2 11.14.2014
Specifications
Power
• Processor (P): 24 V- 250 mA
System Capabilities
•LutronR QS Link allows control and programming of:
• Links (L1/L2): 24 V- 2 A per link
– Energi Savr NodeT lighting control modules
– Wired seeTouchR QS keypads
Typical Power Consumption
• 5 W; 8 Power Draw Units (PDUs)
– PicoR wireless controls
– Wired SivoiaR QS motorized shades/draperies
Environment
• Indoor use only. 32 °F to 104 °F (0 °C to 40 °C),
0% to 90% humidity, non-condensing.
– Interfaces for door sensors, window sensors, and
room chimes
Cooling Method
• Passive cooling
• Keypad buttons can be programmed to toggle lights,
select room scenes, or raise and lower lighting or
shades/draperies.
Internal Timeclock
• ±1 minute per year
• Thermostat control link allows control of LutronR room
thermostat (LR-HVAC-230-S).
• Conditional logic can be programmed to select
different actions based on inputs (e.g., time of day).
Power Failure Memory
• System data stored in non-volatile memory. Timeclock
retention for 10 years.
Miswire Protection
• All terminal block inputs are over-voltage and miswire
protected against wire reversals and shorts.
Communications Link Wire Type
• Two pairs: one pair 18 AWG (0.75 mm2), one pair
18 to 22 AWG (0.75 to 0.34 mm2) twisted,
shielded: IEC PELV / NECR Class 2 cable
• Total wire length for each link must not exceed 500 ft
(152.4 m)
Power Supply Wire Type
• 18 AWG (0.75 mm2)
•LutronR Hospitality Guestroom Control Unit can
interface with the hotel Property Management System
(PMS) via a wired Ethernet hotel network connection.
Software license LGR-OPERA-PR required for Micros
Opera PMS interface.
•LutronR Hospitality Guestroom Control Unit can
interface with the hotel Building Management System
(BMS) via a wired Ethernet hotel network connection.
Software license LGR-BAC-PR required for native
BACnet interface.
• BACnet interface allows BMS to monitor and control
room lighting, shades/draperies, temperature, room
occupancy and vacancy status, and identify system
faults.
• Lighting load schedule data can be programmed at
start-up. This data is used to calculate room lighting
power usage, and is available to the hotel BMS for
logging and reporting via the native BACnet interface.
• Total wire length for each link must not exceed 500 ft
(152.4 m)
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
2
Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 3 11.14.2014
Specifications (continued)
Link Capacities
• QS Wired Device Link: maximum 50 devices / 50 zones
• Thermostat Control Link: maximum 32 room
thermostats
Connections
• Two 5-pin, removable terminal blocks* for Links 1
and 2.
• One 5-pin, removable terminal block* for Power Input.
Communication Links
• Each Lutron® Hospitality Guestroom Control Unit has
three communication links:
– Link 1: Lutron® QS wired device link, up to
50 devices and 50 zones
– Link 2: thermostat control link, up to 32 room
thermostats
– Ethernet: used for system start-up and PMS/BMS
integration.
*
Each terminal will accept up to two 18 AWG (0.75 mm2) wires.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
3
Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 4 11.14.2014
Dimensions
Dimensions shown as: in (mm)
Front View
Side View
Guestroom Control Unit
GCU-HOSP
lutron.com
+ 1.800.523.9466
+ 44.(0)20.7680.4481
6.0
(152)
5.26
(134)
243C IND. CONT. EQ.
IEC PELV / NEC Class 2
®
Assembled in U.S.A.
50015757 Rev. A
4.27
(108)
®
Job Name:
Job Number:
1.06
(27)
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
4
Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 5 11.14.2014
Mounting
(5) Ground
(4) Red “L2” Link 2 Power
(3) Red “L1” Link 1 Power
(2) Red “P” Processor Power
(1) Black “COM” Common
Guestroom
m Control Unit
GCU-HOSP
lutron.com
+ 1.800.523.9466
3.9
9466
+ 44.(0)20.7680.4481
.4481
243C IND. CONT. EQ.
IEC PELV / NEC Class 2
Assembled in U.S.A.
L(+) N(-)
120 - 240 V
Input / Entrada / Entrée
50015757 Rev. A
24 V
Output / Salida / Sortie
QSPS-DH-1-60
22.5 - 25 V
Wire Landing Boards
(QS-WLB)
L-LV14
DIN Rail Power
Supply
(QSPS-DH-1-60)
The Guestroom Control Unit can be installed in an HQ-LV21, L-LV21, or L-LV14
enclosure. It is typically powered using the QSPS-DH-1-60 power supply.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
5
Guestroom Control Unit
GCU-HOSP
Control Interfaces
369708d 6 11.14.2014
System Diagram Example
Property Management System
(PMS)
Guestroom
Control Unit
Hotel
Network
Guestroom Control Unit
GCU-HOSP
lutron.com
Lutron Property Management
System (PMS) Interface Software
+ 1.800.523.9466
+ 44.(0)20.7680.4481
Building Management System
(BMS)
243C IND. CONT. EQ.
IEC PELV / NEC® Class 2
Assembled in U.S.A.
50015757 Rev. A
0,5 N•m
All Others
Input
Hi Temp
L
Program
Switching Power Module
LQSE-4S10-D
Power
www.lutron.com +44.(0)20.7680.4481
N
230 V~ 50/60 Hz 50 mA
8 mm
1,2 N•m
Mains Only
Z096
Zone 1 Zone 2 Zone 3 Zone 4
COM
COM
CCI
QS
MUX
CCI
MUX
Room Thermostat
Def
Opt1
Opt2
µ
H
Option
M
L
Opt3
Outputs 230 V~ 10 AX each
1
2
3
Up
4
DIN Rail Power
Module
International
seeTouchR
Keypad
Designer
seeTouchR
Keypad
QS Sensor
Module (QSM)
PicoR
Wireless
Control
SivoiaR QS
Motorized Roller
Shades
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
SivoiaR QS
Motorized
Drapery
Radio Powr SavrT
Occupancy/
Vacancy Sensor
Door
Switch
Contact
Door
Window
Chime
Switch
Contact
Corridor I/O
Page
6

Download Report