here - IDT 2014

IDT 2014 Advanced Technical Program
Keynote, Invited speakers and Mini-Tutorials: 40 Minutes each
Papers: 25 minutes each
Day 1: Tuesday December 16
7:45AM-8:45AM
8:45am-9:00am
Registration
Breakfast is part of the hotel room rate
Hafid Aourag, DGRST, Algeria,
Mustapha Slamani: IBM, USA
Opening Address & Technical Program
Mohand Tahar Belaroussi: CDTA , Algeria
Introduction
Yervant Zorian: Synopsys, USA
General Co-Chairs
Keynote Speaker & Invited Speaker
9:00AM-9:40AM
EDA’s Key to Success: Riding Waves of Innovation
Greg Hinckley, President of Mentor Graphics,
Mentor Graphics, USA
9:40AM-10:20AM
IC Qualification, Testing & Manufacturing using
Advanced Package offerings & adequate process
technologies
Mohamed Djadoudi: Senior Vice President,
Dialog Semiconductors GmbH, UK
Poster Session,
Coffee break/Refreshment
10:20AM-10:45AM
Session 1 & 2 in parallel
10:45AM-11:10AM
11:10AM-11:35AM
11:35AM-12:00PM
12:00PM-12:25PM
12:25PM- 1:55PM
Session 1: Industrial Track
Chair: Dr. Hans G. Kerkhoff, Netherlands
“RF Filter Characterization using a chirp”
Peter Sarson, ams AG, Austria
Session 2: JTAG and Hardware/Software Co-design
Chair: Zoubir Khelifi, Dialog Semiconductors GmbH, UK
“iJTAG Integration of Complex Digital Embedded Instruments”,
Ahmed Ibrahim and Hans Kerkhoff, Universiteit Twente, Netherlands
“Scalable High Speed Serial Interface for Data
Converters Using The JESD204B Industry
High Speed Special Function Unit for Graphics Processing Unit,
Magdy El-Moursy, Mentor Graphics, Egypt
Standard”
Hakim Saheb, Analog devices Inc, USA
“Failure and Root Cause Analysis for a System-OnHigh Performance MAC Designs, Nikolaos Eftaxiopoulos, Georgios
Chip: An Industrial Case Study”
Zervakis, Kiamal Pekmestzi and Constantinos Efstathiou, National
Samir Boubezari and Jayant Chhabria , Qualcomm,
Technical University of Athens (NTUA) Greece
USA
“Design, Test & Manufacturing of Integrated
Efficient Embedded SoC Hardware/Software Codesign using Virtual
Platform, Magdy El-Moursy, Ayman Sheirah, Mona Safar and Ashraf
Circuits in the Nanotechnology Era”
Omar Kebichi, Chiptestestimate, USA
Salem, Mentor Grahics, Egypt
Lunch Break
Session 3 & 4 in parallel
2:00PM-2:25PM
2:25PM-2:50PM
2:55PM-3:25PM
Session 3: Test and Reliability
Chair: Aderrezak Smatti, CDTA
“An Independent Dual Gate SOI FinFET Soft-Error
Resilient Memory Cell”, Nikolaos Eftaxiopoulos,
Nicholas Axelos, Georgios Zervakis, Konstantinos
Tsoumanis and Kiamal Pekmestzi, National Technical
University of Athens (NTUA) Greece
“Early Reliability Evaluation of a Biomedical
System”, Matteo Sonza Reorda, Hakob Hakobyan,
Paolo Rech and Massimo Violante,
Session 4: Mixed Signal Design & Test
Chair: Peter Sarson, ams AG, Austria
“Low-Cost EVM Built-in Test of RF Transceivers”
Ayssar Serhan, Louay Abdallah, Haralampos-G. Stratigopoulos and
Salvador Mir, IMEP-LAHC &TIMA Laboratory (CNRS-Univ. Grenoble
Alpes), France
“Accurate Analog/RF BIST Evaluation Based on the SVM
Classification of the Process Parameters”, Ahcene Bounceur, Belkacem
Brahmi, Kamel Beznia and Reinhardt Euler, Lab-STICC Laboratory, University
Politecnico di Torino, State Engineering University
of Brest, France
of Armenia, UFRGS, Italy, Armenia, Brazil
Invited Talk
Dependable Mixed-Signal Integrated Systems under Aging, Dr. Hans G. Kerkhoff, University of Twente,
Netherlands
Poster Session
Coffee break/Refreshment
3:30PM-4:00PM
Mini Tutorial
4:00PM-4:30PM
Addressing Trends & Challenges in Emerging Technology Nodes, Yervant Zorian; Chief Architect , Synopsys, USA
4:30PM-6:00PM
Moderator: Hazem El Tahawy , EDA, Mentor Graphics, Egypt
Panelists:
Greg Hinckley, EDA, Mentor Graphics, USA
Yervant Zorian: SOC, Synopsys, USA
Mohamed Djadoudi: Low power, Dialog Semiconductors, UK
Mustapha Slamani: Wireless, IBM, USA
Peter Sarson: Mixed Signal & Automotive , ams AG, Austria
Mojy Chian: Internet of Things, Silicon Cloud international, Singapore
Paulo Freitas: Microsystems, International Iberian Nanotechnology Laboratory
7:00-9:00
Gala Dinner and Evening Entertainment
Panel: Looking to the next 5 years? EDA, Wireless, Automotive, IOT, Low Power, SOC
Day 2: Wednesday December 17
Registration
Breakfast is part of the hotel room rate
8:00AM-9:00AM
Keynote Speaker & Invited Speaker
9:00AM-9:40AM
IoT Fosters Semiconductor Innovation
9:40AM-10:20AM
Spintronic Microsystems: integrating analog
devices with CMOS,
10:20AM-10:45AM
Dr. Mojy C. Chian, Chief Executive Officer, Silicon Cloud
International (SCI). Singapore
Dr. Paulo Freitas, Deputy Director, International Iberian
Nanotechnology Laboratory (INL), Portugal
Coffee break/Refreshment
Session 5 and Session 6 in parallel
10:45AM-11:10AM
11:10AM-11:35AM
Session 5 : Nonvolatile Memories: Present and
Future Challenges,
Chair: Hakim Saheb, Analog Devices, USA
Flash memories: a glance into the future, Cristian
Zambelli – Università degli Studi di Ferrara, Dip.
Ingegneria ENDIF, Ferrara, Italy
Session 6: Analog, RF & Digital Design
Chair: Dr. Salvador Mir: TIMA, France
ReRAM: An alternative beyond Flash memory
Hassen Aziza – Aix-Marseille University, France
RF and Non-linearity characterizations of porous silicon layer for
RF-Ics, Yasmina Belaroussi, Abdelhalim Slimane, Mohand Tahar
Exploiting Satisfiability Modulo Theories for Analog Layout
Automation, Sherif Saif, Mohamed Dessouky, Hazem Abbas, Salwa
Nassar, Watheq El-Kharashi and Mohammad Abdulaziz, Mentor
Graphics, Egypt
Belaroussi, Gilles Scheen, Khaled Ben Ali and Jean Pierre Raskin
CDTA, Algeria
11:35AM-12:00AM
12:00PM-12:25PM
Title: MRAM: A different spin on nonvolatile
memories
Elena Ioana Vatajelu – Politecnico di Torino, Dip. di
Automatica e Informatica, Torino, Italy
Integration of STT-MRAM model into CACTI
simulator, Marco Indaco, Stefano Di Carlo, Elena
Ioana Vatajelu, Paolo Prinetto, Stefano Arcaro and
Diego Pala, politecnico di Torino, Italy
Multi-Device Layout Templates for Nanometer Analog Design,
Mohannad Elshawy, Mohamed Dessouky and Sherif Saif,
Mentor Graphics, Egypt
WaferCatalyst – Towards Promotion of IC Design in the Middle
East using Virtual Community Approach, Shahab Najmi,
Abdulfattah Obeid and Mohammed Bensaleh, King Abdulaziz City for
Science and Technology,(KACST), Saudi Arabia
12:30PM- :1:50PM
Mini-Tutorial and (Session 7 and Session 8 in parallel)
2:00PM-2:40PM
2:40PM-3:05PM
3:05PM-3:30PM
Mini_Tutorial: Challenges to the Design and Optimization of Cyber-Physical Systems
Zebo Peng, Professor, Embedded Systems Laboratory, Linkoping University, Sweden
Session 7: Formal Verification, Reliability &Security Session 8: Test Generation & Synthesis
Chair: Dr. Samir Boubzari, Qualcomm, USA
Chair: Dr. Ali Mahdoum, CDTA, DZ
A UVM-Based Smart Functional Verification
Computational Complexity in Test-Generation Algorithms, József
Platform: Concepts, Pros, Cons, and Opportunities, Sziray, Department of Informatics, Széchenyi University, Győr,
Khaled Mohamed, Mentor Graphics, Egypt
Hungary
Impact Analysis of Resistive Bridge within Deep
Modeling Sequential Circuits with Shared Structurally
Submicron Secured CMOS Circuits, Ghania Ait
Synthesized BDDs, Raimund Ubar, Mihhail Marenkov, Dmitri Mironov
Abdelmalek and Rezki Ziani, Department of Electronics
Mouloud Mammeri University, Tizi Ouzou,Algeria
3:30PM-3:55PM
Design for Security Test on Cryptographic ICs for
Design-Time Security Evaluation, Cuiping Shao,
Xiaobo Hu, Huiyun Li and Guoqing Xu, Shenzhen
Institute of Advanced Technology, Chinese Academy of
Sciences, China
4:00PM-4:30PM
and Vladimir Viies, Tallinn Technical University, Estonia
BDD Based Synthesis of Boolean Functions using Memristors,
Sayak Chakraborti, Varun Chowdhary Paturi, Kamalika Datta and
Indranil Sengupta, Indian Institute of Engineering Science and
Technology, Shibpur &Indian Institute of Technology, Kharagpur, India
Poster Session,
Coffee break/Refreshment
Session 9 and 10 in parallel
4:30PM-4:50PM
Session9: Reliability & Computation
Chair: Dr. Arezki Benfdila, UT, DZ
Reliability Analysis of CMOS Inverter Subjected to
AC & DC NBTI Stresses, Amel Chenouf, Boualem
Djezzar, Abdelmadjid Benadelmoumene, Hakim Tahi and
Mohamed Goudjil, CDTA, Algeria
4:50PM-5:10PM
5:10PM-5:30PM
5:30PM-5:50PM
Session 10: Arithmetic and FPGA Implementation
Chair: Dr. Abdelhakim Khouas, Univ, Boumerdes, DZ
Rapid Prototyping of PVS into FPGA: From Model Based Design
to FPGA/ASICs Implementation, Sabrina Titri and Cherif Larbes,
CDTA, ENP, Algeria
Memristor-Crossbar Networks for Performing
Parallel Computations Using Sneak Paths, Alvaro
Velasquez and Sumit Jha, University of Central
Florida, USA
Testing Gas Sensor with ZnO and doped Al-ZnO
Thin Layer Adsorption, Bakha Yamna, Djeridane
Enhanced Bit-Width Optimization for Linear Circuits with
Feedbacks, El-Sedik Lamini, Rima Bellal, Samir Tagzout,
Hacène Belbachir and Adel Belouchrani, CDTA, USTHB, ENP,
Algeria
A New Binary Arithmetic for Finite-Word-Length Linear
Controllers: MEMS Applications, Abdelkrim Kamel Oudjida, Ahmed
Yassine, Aouimeur Walid, Menasri Lamia, Hamzaoui
Saad and Abderrazak Smatti, CDTA,USTO-MB, Algeria
Liacha, Mohamed Lamine Berrandjia, and Nicolas Chaillet, CDTA,
Algeria, FEMTO-ST Institute, France
Translating of MATLAB /SIMULINLK Models to
Synchronous Dataflow Graph for Parallelism
Analysis and Programming Embedded Multicore
Systems, Kaouther Guesmi and Salem Hasnaoui,
A New Efficient Reduction Scheme to Implement Tree Multipliers
on FPGAs, Khaldoon Mhaidat and Abdulmughni Hamza, Jordan
University of Science & Technology, Irbid, Jordan
Sys'Com Laboratory,National School of Engineering,
Tunis, Tunisia
5:50PM-6:00PM
Closing Remarks & info about Day 3 Trip
Day 3 Thursday December 18: Special Event all day
Tipaza Touristic sites and Roman Ruins Visit

Download Report