Mini P2P IP camera IPC-2016W Features

Mini P2P IP camera
IPC-2016W
Features

1/4 CMOS,0.3 Mega pixel

MJPEG Compression

P2P mobile viewing

One way audio

Send pictures to FTP$E-mail when motion detect

Support wireless connection:IEEE802.11b/g/n

Support AP mode connection, Mobile view the video and device

Support NAS Network Storage recording video
Structure
Model No.
IPC-2016W
Specifications
Camera
Audio
Video
Network
Recording
Sensor
1/4 CMOS
Lens
2.8MM
IR cut
No
Image
0.3 Mega pixel
IR Distance
No
Minimum Illumination
No
Audio
Single way
Input
Insert MIC
Output
No
Compression
MJPEG
Maximum frame rate
30 fps
Image
640x480 320×240 160x120
Wireless
IEEE 802.11b/g/n
AP mode
Support Mobile view the video and device
Network interface
RJ-45 10M/100M adoptive Ethernet network port
SD Card record
Support
NAS record
Support NAS storage records
Motion detect
Alarm
1-5 Level sensitivity
Alarm event
Send pictures to FTP$E-mail when alarm,and
storage records on the computer
Timing sending
By FTP/E-mail timing sending
Multi-level user
Admin/Operator/General users
Web Browser
Support IE 6.0 or above, Google, Firefox Safari,
Opera, etc
General
User access restriction
10 viewers@320x240
10 viewers@160x120
Mobile view
Support IOS,Android system
Adapter
5V 1A
Power
2.5W MAX
Operation temperature
-10 to +50 °C (+14 to +122 °F)
Humidity
10～80%RH
Pakcing dimension
Gross Weight
SD Card
MAX to 32G TF Card
Certificates
CE; FCC; RoHS
Warranty time
One year
10 viewers@640x480
P2P connection.
After you connect the Cameras, Pls download the P2PLIVECAM at your
iphone App Store. For the Android, pls download the P2PLIVECAM at
Android applications of Baidu or scan the QR code to download the
software
Then open to add your camera.
There are automatically add and manually add for option
Picture 1 for automatically add, picture2 for manually add.
Picture 1
Picture 2
Then input the P2p password for visiting.password:8888
Sae and connect it, then it will be ok for your mobile view
1. Install the camera searching tool
，Double click to open to find the LAN
device。
1.1 ( Noted: If the camera IP isn’t consistent with your PC Subnet，Pls modify the ip address to
make it into the same network segment with your PC.)
1.2 (after your amendment, click to research).
2. Double click the Current IP address to enter into the camera。
The factory default username & password: username: admin,
password: 123456
2.1 (When you first time to use the camera, an Active X is required to install).
2.2 (make sure to close your browser to install the Active X)
2.3 Then you can open the browser to enter into the camera。
3、Select the browser style to enter into the camera。
The menu for camera operating is on the right.
One Screen view
Four Screen view
Nine Screen view
camera settings。
The camera parameters display.
Microphone speaker ， snapshot ， video record.Preset
position set，Picture mirror and flip, Brightness and contrast.
4.Camera settings
Click the symbol to enter into the settings.。
4.1 ‘System’
4.1.1 “About” shows some basic information of this camera such as Device SN、Hardware
Version and Firmware Version.
4.1.2 “backup and restore”
4.1.3 “NTP Setting”
Make the setting for the camera clock and time.
4.1.5 “Misc Setting”
Control settings for the camera Power LED and power line frequency.
4.1.6 “System Log”
You can visit the daily schedule here.
4.1.7 “language”
You can choose the camera language and style here.
4.1.8 “change password”
You can modify the password for the administrator here.
4.1.9 “system user”
You can add visitors and set authority.
4.2.0 “update”
For the camera firmware updating.
4.2.1 “Reboot”
Camera restart operation.
5. “Network”
5.1 “Ip config”
You can make some basic network setting for the camera.
5.2 “ Wi-fi”
Shows the wifi status and connection.
5.3”AP Mode setting”
5.4“DDNS”
Shows the camera DDNS name and status.
5.3 “P2P Setting”
You can view the P2p connection status, and make the p2p password settings.
6. “Alarm setting”
6.1 “Alarm setting”
Make the motion detection here.
6.2 “Email setting”
For email alert settings.
6.3 “FTP alarm”
FTP alarm settings.
6.4 “Recording”
Storage path fpr the camera snapshot and record.

Download Report