Presentation FindMe F2 ENG

Satellite Tracking System
FindMe F2
1
FindMe F2 SATELLITE TRACKING SYSTEM
PRIMARY FUNCTION
To determine and to transmit to a user exact LBS and GPS/GLONASS
position of a stolen or lost vehicle, valuable cargo, expensive equipment.
Positioning technologies in use:
GPS (Global Positioning System), GLONASS systems are satellite positioning systems to
determine any target position and speed virtually in any place of the Earth. The main operation
principle of the systems is to determine position by measuring distance to the target from
points with known positions i.e. satellites. Positioning accuracy is within 5-20 m.
LBS (Location Based Services) is a technology which allows positioning using the nearest
GSM-stations instead of satellite data. LBS positioning accuracy is slightly lower than GPS/
GLONASS positioning. Positioning accuracy within the urban area is 200-500 m.
2
FindMe F2 SATELLITE TRACKING SYSTEM PACKAGE
The satellite tracking system package includes:
• Individual FindMe F2 GPS/GLONASS tracking beacon
• Joint secured data processing and storage server
• Joint Internet portal for management and monitoring
• Joint technical support dispatch center
3
PURPOSES AND OBJECTIVES SET WHEN DEVELOPING
FindMe F2 SATELLITE TRACKING SYSTEM
During development and implementation of FindMe F2 Satellite Tracking System, we took
into account most of the users’ wishes and requests and put into action such technical
aspects and principles as:
• No subscription or one-time payments when the beacon is used in «bug» mode with SIMcard pre-installed
• Quick determination of the exact position due to GPS/GLONASS navigation module
• Easy to activate, install, and use
• User-friendly and effective operating procedures
• The best in the segment off-line operation and operating time of FindMe F2 beacon
• Sectional waterproof housing enabling the user to replace SIM-cards and batteries without
any professional help
• Removable rear covers with magnets
• Removable rear cover enabling to connect the device to in-vehicle network*
• In-built accelerometer
• In-built microphone*
• Capable to operate in black box mode*
• International roaming connectivity
• High fail-safety of the entire system
* From FindMe F2.2 version
4
FindMe F2
GPS/GLONASS beacon
• Scope of supply
• Specifications and features
• Principle of operation
• How to turn on and log on
• How to install
5
FindMe F2 BEACON SCOPE OF SUPPLY
The scope of supply includes:
• Device
• SIM-card*
• Batteries *
• Operation Manual
• User card
• Warranty certificate
• Packing
* pre-installed in the device
Optional supply:
• Removable rear cover with magnets
• Removable rear cover enabling to connect
the device to in-vehicle network
• Battery pack
6
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
Housing dimensions: 104x45x19 mm
Device weight: 100 g
Operating temperature range: between -40° and +70°C
Sectional waterproof housing
FindMe F2 GPS/GLONASS beacon has a sectional waterproof housing which enables you
to install the device in high humidity places: inside the bumper, under the car wing, etc. Also,
this feature allows you to use the device to track and return the stolen ATVs, snowmobiles,
outboard engines, valuable cargo, special vehicles, expensive equipment (welding
equipment, diesel plants, and compressors), etc. Furthermore, the sectional housing of the
device enables you to replace SIM-card and batteries without any professional help. You can
insert SIM-card of any GSM mobile operator and then to control and service it by yourself.
The open protocol enables you to connect FindMe F2 to public monitoring systems or to
develop your own ones.
7
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
Removable covers
Undeniable advantage of this device over
similar devices is availability of removable
back covers which significantly expand
scope of its use. The cover with magnets
is used to easy attach FindMe F2 to metal
surfaces and provides breaking force of at
least 12 kg. The cover enabling connection
to in-vehicle network allows you to use
the device as minitracker without regular
battery replacement.
8
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
In-built accelerometer
Using the in-built accelerometer, you can monitor start time and place of the tracked target
movement, as well as receive SMS alerts.
In-built microphone*
The microphone enables you to listen for how the things are going on near the device.
Black box mode*
The device can operate as black box. Information will be saved regardless of GSM network
access and transmitted to the server when signal appears.
* From FindMe F2.2 version
9
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
Li/SOCl2 batteries
FindMe F2 GPS/GLONASS beacon has two Li/SOCl2 AA batteries of 1800 mAh capacity each.
They provide stable device operation during long time. The batteries are able to operate at low
temperatures and have low self-discharge.
In case when the batteries are discharged, you can replace them without effort and any help.
Pre-installed MTS SIM-card
Installed SIM-card has active unit charge rate with GSM and GPRS traffic completely paid
for the whole life time of the device. You will not be charged any subscription or one-time
payments when using the beacon in «bug» mode.
10
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
Android-based FindMe iRZ Online mobile application
The tracking beacon can be controlled using free FindMe iRZ Online mobile application,
developed for the device based on Android Operating System. The procedure of the
application download is as follows:
1) Go to Google Play store at https://play.google.com/store
2) Enter in search box FindMe iRZ Online or use the direct link https://play.google.com/
store/apps/details?id=us.irz.findme&hl=ru
3) Tap download button FindMe iRZ Online will be installed automatically. To use the
application, you will need to install Google Play services and Android OS of 2.2. version or
higher. FindMe iRZ Online displays on the map the tracked target position and movement
direction both at the moment of last communication contact and for the specified date. All
main settings of the beacon are available: enabling / disabling tracking mode, change of
position transmission interval while tracking, setting of contact frequency in standard mode.
Also, the application displays information about positioning accuracy, speed, signal level,
and temperature. Setup and monitoring with FindMe iRZ Online is carried out for all devices
available in personal area at http://www.911.fm.
11
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
GPRS-monitoring mode
In this mode, FindMe F2 steadily monitors the tracked target movements and transmits
information via GPRS channel to the indicated monitoring server. Connection to various
monitoring services is also provided.
12
FindMe F2 GPS/GLONASS BEACON
SPECIFICATIONS AND FEATURES
FindMe F2 GPS/GLONASS beacon consist of the following main components:
• GSM-module with GSM 850/900/1800/1900 support
• GPS/GLONASS module
• GSM-antenna
• GPS/GLONASS antenna
• Accelerometer
• Microphone
These components are manufactured in Europe by leading manufacturers of radio and
electronic components. They have low power consumption and high level of fail-safety.
As a whole, these components make FindMe F2 GPS/GLONASS beacon to be state-ofthe-art and highly reliable device.
13
PRINCIPLE OF OPERATION
OF FindMe F2 GPS/GLONASS BEACON
Device
When pre-installed SIM-card is used,
FindMe F2 GPS/GLONASS beacon applies
the following interaction scheme:
Device - Server - Client
All data from the device and the user pass
through the secured server and are processed
and stored during unlimited time. The apparent
advantage of the above scheme is that you
can view all history data and statistics related
to your device in your personal area. If any
malfunction of the device occurs, data will
never be lost. All data are kept on the server.
Server
Client
FindMe F2 GPS/GLONASS beacon does not
store any information about the user himself
or any data about him.
14
PRINCIPLE OF OPERATION
OF FindMe F2 GPS/GLONASS BEACON
All information including changes, operation mode change, new settings, etc. is received by
FindMe F2 only when it contacts the server.
FindMe F2 cannot receive user and server online commands, if pre-installed SIM-card is used
or tracking mode is not active.
FindMe F2 is not designed to receive information «by request».
You can set frequency and time of contact at your own discretion.
This principle of FindMe F2 GPS/GLONASS beacon operation is in our view ideal and
effective to the greatest possible extent as far as it allows to:
1. Save battery charge to ensure maximum time of offline operation.
2. Keep FindMe F2 GPS/GLONASS beacon invisible for GSM network scan-analyzers. In the
period of no data transmission or communication to the server, the device does not emit any
signals, so it is well hidden.
15
PRINCIPLE OF OPERATION
OF FindMe F2 GPS/GLONASS BEACON
FindMe F2 GPS/GLONASS beacon can operate in several modes:
• Standard mode
• Tracking mode
Standard mode
In this mode the device stays in sleeping mode most of the time and
contacts the server according to the schedule set in personal area. You
can set this parameter in the range between 1 and 7 days (by default,
one-contact per day).
FindMe F2 GPS/GLONASS beacon determines its (LBS) position,
battery charge level, ambient temperature. Using (GPRS) mobile
Internet, the beacon sends all data to the server, and then requests the
server for the next operation mode set by the user in his personal area.
Upon saving the current settings, the device goes into sleeping mode
until the following contact.
16
PRINCIPLE OF OPERATION
OF FindMe F2 GPS/GLONASS BEACON
Tracking mode
You can activate this mode in your personal area at www.911.fm
or using FindMe mobile application, as well as by sending SMS text
message with the device name to single phone number
+7 (911) 770-8888.
When information about tracking mode activation is received, the
device contacts the server according to the schedule set in personal
area. You can set this parameter in the range between 1 minute and 96
hours (by default, once every two hours). FindMe F2 GPS/GLONASS
beacon determines its (GPS/GLONASS) position, battery charge level,
ambient temperature, movement speed and direction. The device
sends all data to the server and repeats them to the user by sending
SMS text message (if this feature is enabled in personal area). After
receiving the data from FindMe F2, you can view the device position
on Yandex, Google, or OSM maps from any device including your
mobile phone or tablet PC (if such functionality is available).
17
HOW TO TURN ON AND LOG ON
FindMe F2 GPS/GLONASS BEACON
In developing FindMe F2 GPS/GLONASS beacon, we tried to create
the most practical and easy-to use device.
1
To turn on and log on your FindMe F2, you will have to follow just
two simple steps:
1. Press and hold «ACT» button on the device housing.
2
2. Send blank SMS text message to the number provided on the rear
panel of the device.
+7 XXX XXX XX XX
18
HOW TO TURN ON AND LOG ON
FindMe F2 GPS/GLONASS BEACON
Within 3-5 minutes you will receive two SMS
text messages:
1. SMS notifying you the device has been
activated
2. SMS acknowledgement of logging-on on the
server containing login and password to enter
your personal area at www.911.fm.
After logging-on, the device will contact the
server and receive standard schedule by default.
You should only install the beacon and be sure
that in emergency FindMe F2 will help you to
return your vehicle.
19
HOW TO INSTALL FindMe F2 GPS/GLONASS BEACON
Please, take into consideration the following when installing your FindMe F2 GPS beacon:
• Never install FindMe F2 near high temperature areas
• Never install near movable parts of the vehicle
• Never install the device with «FindMe» label faced towards metal element
Important Notice! With two or more FindMe F2 GPS beacons installed with
different operation modes, chances of vehicle return dramatically increase.
20
HOW TO INSTALL FindMe F2 GPS/GLONASS BEACON
Possible Installation Places of FindMe F2
Inside structural
elements
In engine and luggage
compartments
On any metal surface
(when cover with magnets is available)
Beacon installation
in places completely
embedded in metal such
as sills, piles, etc. is not
recommended.
Under saloon
and seats’ trimming
Under wings
and bumpers
Warning! To ensure the device is well hidden, we recommend
you to contact our official dealers for professional installation.
21
HOW TO INSTALL FindMe F2 GPS/GLONASS BEACON
When installing FindMe F2, we recommend you to test it. To do this, place GPS/GLONASS
beacon in the expected installation location and press «ACT» button as you did to turn on
the device while logging on
This operation should be done outside any room to ensure that GSM and GPS/GLONASS
signal quality is close to actual conditions as much as possible and the signals do not
interfere with buildings, hangars, or garages, etc.
After pressing «ACT» button, FindMe F2 will be forced to make a contact (beyond the
schedule), determine GSM signal level, GPS/GLONASS position, and transmit data to the
server. In case of successful test (and if the appropriate settings of the device under test
are set), you will receive SMS text message with your position.
22
HOW TO CONTROL AND SET UP
FindMe F2 GPS/GLONASS BEACON
When login and password are received, you can setup the device and view information about
its operation and state in your personal area at www.911.fm.
If you have several FindMe F2 GPS/GLONASS beacons which are logged on with the same
phone number, they will be displayed in one personal area and can be individually selected.
In your personal area you can use the following functionality:
• To change operation mode of the device
• To set intervals and time of FindMe F2 communication contact
• To activate function of user SMS notifications
• To connect international roaming
• To set up accelerometer functions
• To view history of the transmitted positions on map
• To receive full information about the device operation and state
• To change the device name, password to enter the system, your mobile phone number
Warning! You can use www.911.fm service and +7 (911) 770-8888 single phone number
only when using pre-installed MTS SIM-card in the device.
23
SMS COMMANDS TO CONTROL
FindMe F2 GPS/GLONASS BEACON
When you cannot control operation modes of your FindMe F2 GPS/GLONASS beacon in
your personal area at www.911.fm, you can control the device by sending SMS commands to
single phone number
+7 (911) 770-8888
SMS commands:
• To enable tracking mode, send blank SMS text message
to phone number +7 (911) 770 8888
• To disable tracking mode, send «OFF» text message
to phone number +7 (911) 770 8888
• To check the device, send «S» text message
to phone number +7 (911) 770 8888
24
FindMe F2 GPS/GLONASS BEACON BATTERIES
The main parameters of such devices are:
• Maximum operation time of the device
• Guaranteed communication contact and transmission of GPS/GLONASS beacon position
in emergency
To ensure the above parameters, FindMe F2 has two Li/SOCl2 batteries with total capacity
of 3600 mAh.
In accordance with the operation mode and conditions, these batteries provide up to two
years of safe operation of FindMe F2 GPS/GLONASS beacon without replacement.
You need not to monitor the battery charge level. When passing 20% and 10% charge level,
the server will automatically inform you with SMS alerts.
25
MAIN ADVANTAGES OF
FindMe F2 GPS/GLONASS BEACON
• No subscription or one-time payments when the device is used in «bug» mode with
SIM-card pre-installed
• Easy to activate, install, and use
• Off-line operation up to 2 years
• Waterproof
• Sectional housing
• Batteries and SIM-card replacement without professional help
• Optional removable back covers to extend beacon functionality
• GPS/GLONASS module
• Black box mode*
• In-built microphone*
• In-built accelerometer
• International roaming connectivity
• Reliable operation procedure such as Device - Server - Client when pre-installed
SIM-card is used
• www.911.fm integrated web-site with personal area for each user
• Device registration at the third-party monitoring servers
• Free technical support by single phone number 8 800 100 28 77
* From FindMe F2.2 version
26
FindMe F2 GPS/GLONASS BEACON is RELIABLE AND EASY-TO-USE
DEVICE WITH ADVANCED FEATURES CAPABLE TO POSITION ANY
VEHICLE OR MOBILE TARGET WITHOUT ERROR
Should you have any questions,
please, do not hesitate to contact us.
Sincerely yours,
FindMe team
www.911.fm
[email protected]
(812) 318 18 19
8 800 100 28 77
27

Download Report