HMI N2 - Tetra Pak

Sheet 1 /
Face 1
Main dimensions
Tetra Hoyer Prostac™ HMI N2
Multi-lane Interleaver and Stacker
Measurements in mm (inches)
Shipping data
Net. weight
Gross weight
Volume
Tetra Hoyer Prostac HMI N2
550 kg (1213 lbs)
800 kg (1764 lbs)
5.5 m³ (194 cu.ft.)
Connecting conveyer
50 kg (110 lbs)
*
*
Interleaved and stacked products.
We reserve the right to introduce design modifications without prior notice. Tetra Pak, , PROTECTS
WHAT'S GOOD and Tetra Hoyer Prostac are trademarks belonging to the Tetra Pak Group.
www.tetrapak.com
© 2009 Tetra Pak Hoyer AS PD80625EN1 2010-04
* Normally packed together with the Tetra Hoyer Prostac HMI N2 in same shipping box so that total volume is unchanged (5.5 m3) and gross weight is 850 kg (1874 lbs).
Sheet 1 /
Face 2
Triple connecting conveyor from Tetra Hoyer Flowrap MW to
three Tetra Hoyer Prostac HMI N2 interleaver/stackers.
Application
Interleaving and stacking of wrapped ice cream or water-ice bars,
ready for packing into cartons.
Operating principle
After cut-off from the wrapper, each row of wrapped bars is
transferred to the Tetra Hoyer Prostac HMI N2 by means of the
Tetra Hoyer Flowrap MW connecting conveyor, a continuously
running flat belt conveyor. Every second row is led directly down
into the transverse pocket conveyor of the interleaver. The rows in
between are led onto a tipping plate which turns the bars 180°onto
an overhanging conveyor mounted above the procket conveyor.
The end of the overhanging conveyor slopes downwards and
deposits the bars one by one onto the pocket conveyor so that
they are interleaved with the bars which have already been
transferred to the pocket conveyor.
At the end of the pocket conveyor the bars are stacked on their
lateral edge by means of stacker plates which lead the bars
forward. The stacker plates are mechanically connected to the
conveyors which are driven by an AC motor. The Tetra Hoyer
Prostac HMI N2 is fully synchronized with the Tetra Hoyer Flowrap
MW through the Tetra Hoyer Flowrap MW PLC unit.
The Tetra Hoyer Prostac HMI N2 can be adjusted for uninterleaved
operation with stacking in one row. This is the normal procedure
when handling round bars.
If the Tetra Hoyer Prostac HMI N2 is delivered as part of a complete
line will it be controlled by the PLC in the Tetra Hoyer Flowrap MW.
If the Tetra Hoyer Prostac HMI N2 is delivered as an upgrade unit
will it be controlled by its own PLC.
Standard design
The Tetra Hoyer Prostac HMI N2 is built onto a frame made of
stainless open profiles. All main components are covered with
stainless steel sheeting for easy cleaning.
The Tetra Hoyer Prostac HMI N2 is available in both a right hand
and a left hand design, allowing feed-in from a wrapper placed
either to the right or to the left of the interleaver.
Product transfer from wrapper outlet to product moving system.
The Tetra Hoyer Prostac HMI N2 is designed for connection to the
Tetra Hoyer Flowrap MW multi-lane wrapper (see product
description No. PD80623).
Capacity
The output of the Tetra Hoyer Prostac HMI N2 corresponds to the
capacity of the Tetra Hoyer Flowrap MW wrapper. A Tetra Hoyer
Flowrap MW wrapper with up to 5 lanes requires one Tetra Hoyer
Prostac HMI N2 stacker, whereas a Tetra Hoyer Flowrap MW
wrapper with up to 12 lanes will require two Tetra Hoyer Prostac
HMI N2 stackers. In both cases an extra Tetra Hoyer Prostac HMI
N2 stacker can be connected depending on the layout of the line
and the number of packing operators desired. Contact sales
support for further clarification on number of recommended
Tetra Hoyer Prostac HMI N2, if any doubt.
In standard design the Tetra Hoyer Prostac HMI N2 can handle
bars within the following dimensions (incl. 35 mm protruding stick):
Dimensions
Lenght
Width
Thickness
Paper width
Bag lenght
Minimum
110 mm (4.3”)
15 mm (0.6”)
10 mm (0.4”)
80 mm (3.2”)
160 mm (6.3”)
Technical data
Standard voltage
Connection
Air consumption
Air pressure
Tetra Hoyer Flowrap MW connecting conveyor
In order to transfer the bars from the outlet conveyor of the
Tetra Hoyer Flowrap MW to the Tetra Hoyer Prostac HMI N2 a
connecting conveyor is necessary. According to the number of
Tetra Hoyer Prostac HMI N2 employed in the line a single, double
or triple connecting conveyor will be required. The Tetra Hoyer
Flowrap MW connecting conveyor is equipped with a separate
gear motor and equipment for blowing away empty bags.
1.00)
Single connecting conveyor from Tetra Hoyer Flowrap MW to one
Tetra Hoyer Prostac HMI N2 interleaver/stacker.
1.01)
Double connecting conveyor from Tetra Hoyer Flowrap MW to
two Tetra Hoyer Prostac HMI N2 interleaver/stackers.
1.02)
Tetra Hoyer Prostac HMI N2
3 x 400 V
0.3/0.45 kW
1.5 m³/h (53 cu. ft./h)
5–7 bar (73–102 psi)
Connecting conveyor
3 x 400 V
1.1 kW
12 m³/h (425 cu. ft./h)
4 bar (58 psi)
Maximum
180 mm (7.1”)
Bar freezer pitch-2 mm
35 mm (1.4”)
3.2 x Bar freezer pitch
230 mm (9.1”)
Sheet 1 /
Face 2
Triple connecting conveyor from Tetra Hoyer Flowrap MW to
three Tetra Hoyer Prostac HMI N2 interleaver/stackers.
Application
Interleaving and stacking of wrapped ice cream or water-ice bars,
ready for packing into cartons.
Operating principle
After cut-off from the wrapper, each row of wrapped bars is
transferred to the Tetra Hoyer Prostac HMI N2 by means of the
Tetra Hoyer Flowrap MW connecting conveyor, a continuously
running flat belt conveyor. Every second row is led directly down
into the transverse pocket conveyor of the interleaver. The rows in
between are led onto a tipping plate which turns the bars 180°onto
an overhanging conveyor mounted above the procket conveyor.
The end of the overhanging conveyor slopes downwards and
deposits the bars one by one onto the pocket conveyor so that
they are interleaved with the bars which have already been
transferred to the pocket conveyor.
At the end of the pocket conveyor the bars are stacked on their
lateral edge by means of stacker plates which lead the bars
forward. The stacker plates are mechanically connected to the
conveyors which are driven by an AC motor. The Tetra Hoyer
Prostac HMI N2 is fully synchronized with the Tetra Hoyer Flowrap
MW through the Tetra Hoyer Flowrap MW PLC unit.
The Tetra Hoyer Prostac HMI N2 can be adjusted for uninterleaved
operation with stacking in one row. This is the normal procedure
when handling round bars.
If the Tetra Hoyer Prostac HMI N2 is delivered as part of a complete
line will it be controlled by the PLC in the Tetra Hoyer Flowrap MW.
If the Tetra Hoyer Prostac HMI N2 is delivered as an upgrade unit
will it be controlled by its own PLC.
Standard design
The Tetra Hoyer Prostac HMI N2 is built onto a frame made of
stainless open profiles. All main components are covered with
stainless steel sheeting for easy cleaning.
The Tetra Hoyer Prostac HMI N2 is available in both a right hand
and a left hand design, allowing feed-in from a wrapper placed
either to the right or to the left of the interleaver.
Product transfer from wrapper outlet to product moving system.
The Tetra Hoyer Prostac HMI N2 is designed for connection to the
Tetra Hoyer Flowrap MW multi-lane wrapper (see product
description No. PD80623).
Capacity
The output of the Tetra Hoyer Prostac HMI N2 corresponds to the
capacity of the Tetra Hoyer Flowrap MW wrapper. A Tetra Hoyer
Flowrap MW wrapper with up to 5 lanes requires one Tetra Hoyer
Prostac HMI N2 stacker, whereas a Tetra Hoyer Flowrap MW
wrapper with up to 12 lanes will require two Tetra Hoyer Prostac
HMI N2 stackers. In both cases an extra Tetra Hoyer Prostac HMI
N2 stacker can be connected depending on the layout of the line
and the number of packing operators desired. Contact sales
support for further clarification on number of recommended
Tetra Hoyer Prostac HMI N2, if any doubt.
In standard design the Tetra Hoyer Prostac HMI N2 can handle
bars within the following dimensions (incl. 35 mm protruding stick):
Dimensions
Lenght
Width
Thickness
Paper width
Bag lenght
Minimum
110 mm (4.3”)
15 mm (0.6”)
10 mm (0.4”)
80 mm (3.2”)
160 mm (6.3”)
Technical data
Standard voltage
Connection
Air consumption
Air pressure
Tetra Hoyer Flowrap MW connecting conveyor
In order to transfer the bars from the outlet conveyor of the
Tetra Hoyer Flowrap MW to the Tetra Hoyer Prostac HMI N2 a
connecting conveyor is necessary. According to the number of
Tetra Hoyer Prostac HMI N2 employed in the line a single, double
or triple connecting conveyor will be required. The Tetra Hoyer
Flowrap MW connecting conveyor is equipped with a separate
gear motor and equipment for blowing away empty bags.
1.00)
Single connecting conveyor from Tetra Hoyer Flowrap MW to one
Tetra Hoyer Prostac HMI N2 interleaver/stacker.
1.01)
Double connecting conveyor from Tetra Hoyer Flowrap MW to
two Tetra Hoyer Prostac HMI N2 interleaver/stackers.
1.02)
Tetra Hoyer Prostac HMI N2
3 x 400 V
0.3/0.45 kW
1.5 m³/h (53 cu. ft./h)
5–7 bar (73–102 psi)
Connecting conveyor
3 x 400 V
1.1 kW
12 m³/h (425 cu. ft./h)
4 bar (58 psi)
Maximum
180 mm (7.1”)
Bar freezer pitch-2 mm
35 mm (1.4”)
3.2 x Bar freezer pitch
230 mm (9.1”)
Sheet 1 /
Face 1
Main dimensions
Tetra Hoyer Prostac™ HMI N2
Multi-lane Interleaver and Stacker
Measurements in mm (inches)
Shipping data
Net. weight
Gross weight
Volume
Tetra Hoyer Prostac HMI N2
550 kg (1213 lbs)
800 kg (1764 lbs)
5.5 m³ (194 cu.ft.)
Connecting conveyer
50 kg (110 lbs)
*
*
Interleaved and stacked products.
We reserve the right to introduce design modifications without prior notice. Tetra Pak, , PROTECTS
WHAT'S GOOD and Tetra Hoyer Prostac are trademarks belonging to the Tetra Pak Group.
www.tetrapak.com
© 2009 Tetra Pak Hoyer AS PD80625EN1 2010-04
* Normally packed together with the Tetra Hoyer Prostac HMI N2 in same shipping box so that total volume is unchanged (5.5 m3) and gross weight is 850 kg (1874 lbs).

Download Report