PRODUCT GUIDE 18” PULL-OUT PANT RACK 300.3108.[FIN] DESCRIPTION & SPECIFICATIONS The 18” Pull-Out Pant Rack is designed for visibility and accessibility of pants and skirts. Comes with 12 specially designed low-profile hangers. SIZE & CAPACITY | AVAILABLE FINISHES 18” w 12 Hangers | Matte Aluminum, Polished Chrome, Matte Nickel, Oil Rubbed Bronze, Polished Brass, Matte Brass. 1 24" 18" Euro Screw 5mmx10mm 26" To Bottom of Section Mounting Locations 17 7/8" 7 38" INSTRUCTIONS & SPECIFICATIONS STEP STEP STEP STEP 1: Press slide leveller down and remove slide rails from the rack. 2: Mount slide rails to partition using euro screws. 3: Extend the slide on the rack and re-install on slide rail. 4: Set rack to fully retracted position and insert hangers. -F our (4) #5 Euro Screws are required to mount. Storage Accessories. Differentiated by Design. FINISH CODE (FIN) MATTE ALUMINUM MAL POLISHED CHROME CR MATTE NICKLE MNL OIL RUBBED BRONZE ORB MATTE BRASS MBS POLISHED BRASS BS www.TAGHardware.com PRODUCT GUIDE 24” PULL-OUT PANT RACK 300.3110.[FIN] DESCRIPTION & SPECIFICATIONS The 24” Pull-Out Pant Rack is designed for visibility and accessibility of pants and skirts. Comes with 18 specially designed low-profile hangers. SIZE & CAPACITY | AVAILABLE FINISHES 24” w 18 Hangers | Matte Aluminum, Polished Chrome, Matte Nickel, Oil Rubbed Bronze, Polished Brass, Matte Brass. 1 24" 24" 7 38" 26" To Bottom of Section Euro Screw 5mmx10mm 17 7/8" Mounting Locations INSTRUCTIONS & SPECIFICATIONS STEP STEP STEP STEP 1: Press slide leveller down and remove slide rails from the rack. 2: Mount slide rails to partition using euro screws. 3: Extend the slide on the rack and re-install on slide rail. 4: Set rack to fully retracted position and insert hangers. -F our (4) #5 Euro Screws are required to mount. Storage Accessories. Differentiated by Design. FINISH CODE (FIN) MATTE ALUMINUM MAL POLISHED CHROME CR MATTE NICKLE MNL OIL RUBBED BRONZE ORB MATTE BRASS MBS POLISHED BRASS BS www.TAGHardware.com PRODUCT GUIDE 30” PULL-OUT PANT RACK 300.3130.[FIN] DESCRIPTION & SPECIFICATIONS The 30” Pull-Out Pant Rack is designed for visibility and accessibility of pants and skirts. Comes with 24 specially designed low-profile hangers. SIZE & CAPACITY | AVAILABLE FINISHES 30” w 24 Hangers | Matte Aluminum, Polished Chrome, Matte Nickel, Oil Rubbed Bronze, Polished Brass, Matte Brass. 1 24" 30" 7 38" 26" To Bottom of Section 17 7/8" Euro Screw 5mmx10mm Mounting Locations INSTRUCTIONS & SPECIFICATIONS STEP STEP STEP STEP 1: Press slide leveller down and remove slide rails from the rack. 2: Mount slide rails to partition using euro screws. 3: Extend the slide on the rack and re-install on slide rail. 4: Set rack to fully retracted position and insert hangers. -F our (4) #5 Euro Screws are required to mount. Storage Accessories. Differentiated by Design. FINISH CODE (FIN) MATTE ALUMINUM MAL POLISHED CHROME CR MATTE NICKLE MNL OIL RUBBED BRONZE ORB MATTE BRASS MBS POLISHED BRASS BS www.TAGHardware.com
© Copyright 2024 ExpyDoc
