download

Post Show Recap of decorative
laminates on display
This guide is intended to be a recap presentation of the decorative surfaces on display at the 2014 IWF.
Color and design can vary by monitor and device therefore should not be used to make final decisions.
Please contact SSI North America to obtain a sample of the actual material to make final decisions.
SSI North America
961 Route 10E
Randolph NJ 07869
P. 973.598.0152
www.ssinorthamerica.com
[email protected]
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Satin & Super Matte
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Siena Matte
The design resembles a stoney earth-tone
and a low gloss painted finish.
Siena is part of the Solid Colored Super Matte Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Siena Matte 75/4203 A16 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: YES
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard SF230
Siena Matte 75/4203 A16 ML
3
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Turmalin Matte
A wet sand coloration with
a low gloss finish design.
Turmalin is part of the Solid Colored Super Matte Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Turmalin 75/7105 A16 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: YES
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: N/A
Turmalin 75/7105 A16 ML
4
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Umbra Matte
A mid-tone Brown coloration
with a low gloss finish design.
Umbra is part of the Solid Colored Super Matte Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Umbra Matte 75/5100 A16 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 250lm
MOQ: None
Stocked: Yes
Umbra 75/5100 A16 ML
5
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Gauntlet Grey Matte
A stormy sky Grey coloration
with a low gloss finish design.
Gauntlet Grey is part of the Solid Colored Super Matte Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Gauntlet Grey 75/5101 A16 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard SF231
Gauntlet Grey 75/5101 A16 ML
6
P ENTADECOR 3 D L AMINATES - S OLID COLORS
Satin Antique White
A sea shell White coloration
with a low gloss finish design.
Satin Antique White is part of the Solid Colored Super Matte
Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Satin Antique White A15 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: YES
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard W100
Satin Antique White 06/1260 A15 BL
7
P ENTADECOR 3 D L AMINATES - S OLID COLORS
White Matte
A stark White coloration with a
low gloss finish design.
White Matte is part of the Solid Colored Super Matte Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
White Matte 04/2090 A16 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard W100
White Matte 04/2090 A16 BL
8
P ENTADECOR 3 D L AMINATES - S OLID COLORS
H56 Textured White
A creamy White coloration with
a deep textured surface finish.
H56 Textured White is part of the Solid Color Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
H56 Textured White 06/1101 - T
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
H56 Textured White 06/1101 -T H56 BL
9
P ENTADECOR 3 D L AMINATES - S OLID COLORS
H56 Textured Black
A solid Black coloration with a deep
textured surface finish.
H56 Textured Black is part of the Solid Color Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
H56 Textured Black 95/2600 H56 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: NA
H56 Textured Black 95/2600 H56 BL
10
P ENTADECOR 3 D L AMINATES - KP E XTREME
kpExtreme Top Line
Siena Matte 75/4203 A16 ML
P ENTADECOR 3 D L AMINATES - KP E XTREME
Frosty White TL
Bone-White in coloration combined with an
embossing and top coating that provides
incredible scratch and mar resistance.
Frosty White TL is part of the kpExtreme with Topline
Surface Series.
Applications:
Most vertical applications
Medium duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Frosty White 04/2480 B29 TL
Gauge: .022” (550µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 100lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Frosty White 04/2480 B29 TL
12
P ENTADECOR 3 D L AMINATES - KP E XTREME
Black TL
Jet Black in coloration combined with an
embossing and top coating that provides
incredible scratch and mar resistance.
Black TL is part of the kpExtreme with Topline Surface Series.
Applications:
Most vertical applications
Medium duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Black 95/2500 B29 TL
Gauge: .022” (550µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 100lm
MOQ: None
Stocked: Yes
Matching TFL: N/A
Black 95/2500 B29 TL
13
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Special Surfaces
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Boardwalk
Resembling a new piece of barn-wood
with a deep texture surface texture
finished with a low gloss sheen.
Boardwalk is part of the Textured Beauty, Printed Films
Special Surface Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Boardwalk WE/0201 H56 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: No
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Tafisa L551
Boardwalk WE/0201 H56 ML
15
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Beachwood
A sun faded looking board with
a deep surface texture and low
gloss top coat.
Beachwood is part of the Textured Beauty, Printed Films
Special Surface Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Beachwood WE/0202 H56 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Tafisa L550
Beachwood WE/0202 H56 ML
16
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Copernicus Oak Lt
A grey toned barn-wood design with
an ultra smooth surface and low gloss
top coat.
Copernicus Oak Lt is part of the Printed Films, Special
Surface Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile Wrapping
Miter folding
Order samples
Copernicus Oak Light EI/3901 A16 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: No
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Copernicus Oak Light EI/3901 A16 ML
17
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Copernicus Oak Dark
A design with varying depths of dark brown
coloration with an ultra smooth surface and
a low gloss surface finish.
Copernicus Oak Dark is part of the Printed Films, Special
Surface Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Copernicus Oak Dark EI/3902 A16 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Copernicus Oak Dark EI/3902 A16 ML
18
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Stromboli
Blending shades of Browns accented with
streaks of White and Black combined with
a deep surface finish.
Stromboli is part of the Textured Beauty, Printed Films,
Special Surface Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Stromboli HO/2705 H56 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard WF397
Stromboli HO/2705 H56 BL
19
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Merapi
Various shades of Blacks and Greys faded
together with an undertone of Violet
embossed with a deep texture.
Merapi is part of the Textured Beauty, Printed Films, Special
Surfaces Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Merapi HO/2706 H56 BL
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Matching TFL: Flakeboard WF396
Merapi HO/2706 H56 BL
20
P ENTADECOR 3 D L AMINATES - W OODGRAINS
Linear Ash
Veins of Black and Grey lines varying in
width with a deep textured surface and low
gloss finish.
Linear Ash is part of the Textured Beauty, Printed Films,
Special Surfaces Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Linear Ash HO/2401 H56 ML
Gauge: .012” (300µ)
Width: 56” (1420mm)
Peel-coat: NO
Full roll: 250lm
MOQ: None
Stocked: Yes
Order samples
Matching TFL: Flakeboard WF368
Linear Ash HO/2401 H56 BL
21
P ENTADECOR 3 D L AMINATES - H IGH G LOSS
Gloss Line
P ENTADECOR 3 D L AMINATES - H IGH G LOSS
Cream
A milky light Brown coloration with a
reflective high gloss surface finish.
Cream is part of the High Gloss Solids with Pressable
Peel-coat.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile Wrapping
Miter folding
Order samples
Cream 1E/8810 S41 GL
Gauge: .018” (450µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 125lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Cream 1E/8810 S41 GL
23
P ENTADECOR 3 D L AMINATES - H IGH G LOSS
Sahara Beige
A warm Brown tone with a
reflective high gloss surface.
Sahara Beige is part of the High Gloss Solids with Pressable
Peel-coat.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Sahara Beige 1E/8000 S41 GL
Gauge: .018” (450µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 125lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Sahara Beige 1E/8000 S41 GL
24
P ENTADECOR 3 D L AMINATES - H IGH G LOSS
Bright Red
An electric Red coloration combined
with high gloss surface finish.
Bright Red is part of the High Gloss Solids with Pressable
Peel-coat Series.
Applications:
Most vertical applications
Light duty horizontal applications
Fabrication techniques:
Membrane pressing
Flat lamination
Profile wrapping
Miter folding
Order samples
Bright Red 35/3940 S41 GL
Gauge: .020” (500µ)
Width: 56” (1420mm)
Peel-coat: Yes
Full roll: 100lm
MOQ: None
Stocked: Yes
Matching TFL: NA
Bright Red 35/3940 S41 GL
25
EGR S TYLE L ITE - H IGH G LOSS A CRYLICS
StyleLite High Gloss Acrylic
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
White
A mid-tone White coloration with an ultra
high gloss acrylic top layer.
White StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
White SHAB5117
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: Yes
Edge Banding: Solid color & 2 in 1
Matching HPL: Wilsonart 1573-60
White SHAB5117
27
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Vanilla
Warm off-white in coloration with
an ultra high gloss acrylic top layer.
Vanilla StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Vanilla SHAB5101
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Solid color
Matching HPL: Wilsonart D403
Vanilla SHAB5101
28
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Carbon
Deep rich Black coloration with an
ultra high gloss acrylic top layer.
Carbon StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Carbon SHAB5106
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: Yes
Edge Banding: Solid color & 2 in 1
Matching HPL: Wilsonart 1595
Carbon SHAB5106
29
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Cherry Red
Fire-engine red coloration with an
ultra high gloss acrylic top layer.
Cherry Red StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Cherry Red SHAB5104
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Solid color
Matching HPL: Wilsonart D307
Cherry Red SHAB5104
30
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Glacier
Green glass coloration with an ultra
high gloss acrylic top layer.
Glacier StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Glacier SHAB5132
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Solid color & 2 in 1
Matching HPL: NA
Glacier SHAB5132
31
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Sapphire
Deep royal Blue with metallic flake coloration
with an ultra high gloss acrylic top layer.
Sapphire StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Sapphire SHAB5139
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Satin Aluminum
Matching HPL: NA
Sapphire SHAB5139
32
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Champagne
Golden yellow with metallic flake coloration
with an ultra high gloss acrylic top layer.
Champagne StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Champagne SHAB5124
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: Yes
Edge Banding: Solid color with metallic flake
Order samples
Matching HPL: NA
Champagne SHAB5124
33
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Ruby Red
Deep ruby coloration with an ultra
high gloss acrylic top layer.
Ruby Red StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Ruby Red SHAB5114
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Solid color & 2 in 1
Matching HPL: Wilsonart D14
Ruby Red SHAB5114
34
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Blue
Sky Blue coloration with an ultra high
gloss acrylic top layer.
Blue StyleLite is part of the SSI North American Stock Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Blue SHAB5116
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: NO
Edge Banding: Solid color
Matching HPL: Wilsonart D25
Blue SHAB5116
35
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Smoke
Muted Grey coloration with an ultra
high gloss acrylic top layer.
Smoke StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Smoke SHAB5144
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Solid color & 2 in 1
Matching HPL: Wilsonart 381
Smoke SHAB5144
36
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Graphite
Rich steel Grey with metallic flake coloration
with an ultra high gloss acrylic top layer.
Graphite StyleLite is part of the SSI North American Stock
Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Graphite SHAB5134
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: No
Edge Banding: Satin Aluminum suggested
Order samples
Matching HPL: NA
Graphite SHAB5134
37
EGR S TYLE L ITE - H IGH G LOSS A CRYLIC
Grey
Deep steel coloration with an ultra
high gloss acrylic top layer.
Grey StyleLite is part of the SSI North American Stock Range.
Applications:
Most interior vertical applications
Fabrication techniques:
Flat lamination
Miter-folding
Order samples
Grey SHAB5115
Gauge: 1mm
Sheet size: 1,230 x 2465mm
Peel-coat: Yes
MOQ: 1 sheet
Stocked: Yes
Laminated Panel Stocking Program: Yes
Edge Banding: Solid color & 2 in 1
Matching HPL: Wilsonart 91
Grey SHAB5115
38

Download Report