Cable Cubby 202 Installation Guide

e
NT:
RTA.com for thtion
O
P
IM
tron
talla
w.ex uide, ins ations.
o ww
Go t te user g specific
nd
ple
com ctions, a
u
instr
Cable Cubby 202 • Installation Guide
This guide provides instructions for an experienced installer to install and connect the
Extron Cable Cubby 202 Cable Access Enclosures.
The Cable Cubby units are furniture-mounted enclosures for cable access,
connections, and AC power. Cables that are not in use can be stored out of
the way while remaining connected to the presentation system.
BY
UB
EC
BL
CA
Planning
Check with local and state regulations before
starting the installation:
Ensure that the planned installation complies with building and
electrical codes.
Ensure that the planned installation complies with the Americans with Disabilities
Act or other accessibility requirements.
Check all parts and equipment before installation:
Ensure that all parts are present in each kit.
Ensure that necessary tools and equipment are available for the installation.
Kit Contents
Cable Grommet Plate
and #4-40 Plate Screws
Grommet Plugs
(3) 3/8", (1) 1/4"
Cable Cubby 202
Mini AAP and #4-40 Mounting
Screws (US model only)
AC Cord Retainer Clip
(Non-US models only)
Preparing the Table
Cut a hole in the surface where the enclosure will be installed. Read the following information before making a cut.
Determine the best location for the enclosure
Ensure that the location where the Cable Cubby is to be installed is convenient for as many users as possible.
Ensure that the edge on which the lid opens is oriented correctly.
Ensure that there is ample space under the table for cables.
Choose a method for cutting the hole in the table
See the next page for details on cutting the hole in the table.
1
Cable Cubby 202 • Installation Guide (Continued)
Choose one of the following methods for cutting the hole:
Hand Router and Routing Template
Jigsaw and Paper Cut-Out Template
CNC Wood Router
If using a CNC wood router or
other precise machinery, use the
exact cut-out dimensions (see the
table below).
ut-
C
ut-
pla
m
Te
C
le
ab
C
ut
O
on
xtr
E
2
e
th
r
20
fo
te by
pla b
m u
Te C
le
ab
C
ut
O
fo
te by
b
u
C
r
th
e
E
xtr
on
2
20
(8.2 3.25
5 cm"
)
(1
(1
7.
es
cc
A
s
s
+ 0.
0.02 00”
(0.0(0.00
5 cm cm
) )
"
17
x
1
1" 1:
r
se
5.
U
es
cc
A
el
ez
B
nt e.)
Fro is lin
of th
e ut
dg c
E t
r no
ute o
O (D
1
.
k.
d
e: ale rin
lle
sta a
siz sc h
in re
.
e a
e t ts
te
b ut
2
la
,
to t-o
20
ag rin o
p
n
y
P P n
ct u . m
io
b
o
u c te
b
d ce la te
sit
u
D
o
ro a p d
p
p rf m an e C
d
e su te t th le
an
th e e tou on ab
s
th u n C
n
e
rm th
fi e m c io
n v o e it th
sio
o o fr th s
n
C em y) re po ere d. e g.
h e
1. R ra su e w ll dim nin
a th re ta k e
2. (g e
s c p
M ark itu in he o
e
3. M rn be c th
l
4. fu il ble ut
w ou c
D en
5. th
r
se
"
17
x
1
1" 1:
U
1
.
k.
d
e: ale rin
lle
sta a
siz sc h
in re
.
e a
e t ts
te
b ut
2
la
,
to t-o
20
ag rin o
p
n
y
P P n
ct u . m
io
b
o
u c te
b
d ce la te
sit
u
D
o
ro a p d
p
p rf m an e C
d
e u te t th le
s
el
an
th e e tou on ab
s
ez
th u n C
n
B
e
rm th
fi e m c io
nt e.)
n v o e it th
sio
o o fr th s
n
Fro is lin
C em y) re po ere d. e g.
h e
of th
1. R ra su e w ll dim nin
e ut
a th re ta k e
2. (g e
s c p
dg c
M ark itu in he o
E t
r no
e
3. M rn be c th
ute o
l
4. fu il ble ut
O (D
w ou c
D en
th
7.78 0"
S
cm
CUUR
)
AR T-OFACE
EA UT
s:
iu
ad )
R cm
ut .6
-O (0
ut "
C 25
0.
s:
iu
ad )
R cm
ut .6
-O (0
ut "
C 25
0.
(8.2 3.25
5 cm"
)
7.
7.78 0"
S
cm
CUUR
)
AR T-OFACE
EA UT
+ 0.
0.02 00”
(0.0(0.00
5 cm cm
) )
Cut-out Dimensions
/N
P
/N
P
?
?
?
-?
?
?
1
.
ev
R
?
?
?
-?
?
?
-0
-0
A
1
.
ev
R
A
Visit www.extron.com for Cable Cubby
routing template part numbers and
instructions.
Dimensions and cut-out templates are
available online at www.extron.com.
User Access
Width
Side Dimension
7.0"
(17.8 cm)
3.25"
(8.3 cm)
The opening in the table for the Cable Cubby should be cut only by licensed and bonded craftspeople.
CAUTION: Wear safety glasses when operating power equipment. Failure to comply can result in eye injury.
ATTENTION: Portez des lunettes de sécurité lorsque vous utilisez l’équipement électrique. Ne pas respecter cela peut
conduire à une blessure à l’oeil.
Preparing the Cable Cubby
Assemble the cable pass-through plate and (for US models) install a Mini AAP.
1
Assemble the cable pass-through
plate with your choice of AV cables.
Snap the included hole plugs into
any unused holes.
2
Insert the assembled plate into the
enclosure and secure the plate, using
the included plate screws.
3
US models only:
Install a Mini AAP into the
opening by the AC connection.
Connect AV cables to the Mini
AAP if necessary, and secure
the plate using the provided
plate screws.
2
Mounting and Installing the Cable Cubby in the Table
CAUTION: The flanged edges of the top of the surface enclosure are sharp. These edges are also soft and may be easily
nicked or bent. Exercise caution when handling the enclosure to prevent personal injury or damage to the enclosure.
ATTENTION: Les extrémités à brides du haut de la surface du boîtier sont aiguisées. Ces extrémités sont aussi lisses
et peuvent facilement être coupées ou pliées. Soyez prudents lorsque vous manipulez le boîtier afin d’éviter de
l’endommager ou de vous blesser.
1
1
2
2
En
Ensure
that the side clamps are
se
seated
against the enclosure.
3
4
Remove the plastic strips and film on the
surface of the Cable Cubby.
Ensure that the side clamps are
En
seated against the enclosure.
se
3
4
Remove the plastic strips and film on the
surface of the Cable Cubby.
Lower the Cable Cubby into the hole
to test the fit. If necessary, carefully
enlarge the opening.
Lower the Cable Cubby into the hole
to test the fit. If necessary, carefully
enlarge the opening.
Ensure that the Cable Cubby is firmly seated in the table.
Using a screw driver or drill, turn the clamp screw clockwise
and slowly tighten it to secure the enclosure to the surface.
Ensure that the Cable Cubby is firmly seated in the table.
Do not
overtighten the Phillips
Using a screw driver orATTENTION:
drill, turn the clamp screw
clockwise
and slowly tighten it to secure
the enclosure
to the
surface.
screw
clamps.
Overtightening
can bend the
head screws on the
horizontal flange of
the screw clamp.
ATTENTION: Ne serrez pas trop les vis à tête Phillips sur les pinces à
visser. Le fait de trop serrer peut faire se plier la fixation horizontale
de la pince à vis.
3
Routing and Connecting Cables
Cable Retainer for Non-US Models
For non-US models, secure the power cable with
the included cable retainer as shown below.
1
Use zip ties to secure
cables to the rectangular
holes in rear of Cable
Cubby.
2
Connect cables to the AV system
and connect the AC power cord.
2
1
CAUTION:
Risk of Electric Shock.
This equipment must be
grounded.
NOTE:
•
•
For cable pass-through
applications, a
llow at least
36 inches (0.9 m) of cable
loop for each cable.
ATTENTION:
Risque de choc électrique.
Ensure that there is no
tension on the power cable.
Cet équipement doit être fixé
au sol.
Installation Checklist
Planning (page 1)
Check with local and state regulations before starting the installation.
Check all parts and equipment before installation.
Preparing the Table (pages 1 and 2)
Determine the best location for the enclosure.
Choose a method for cutting the hole in the table.
Preparing the Cable Cubby (page 2)
Assemble the cable pass-through plate and (for US models) install a Mini AAP.
Mounting and Installing the Cable Cubby in the Table (page 3)
Routing and Connecting Cables (page 4)
68-2486-01
Rev. A
04 14
Extron Headquarters
+800.633.9876 Inside USA/Canada Only
Extron USA - West
Extron USA - East
+1.714.491.1500+1.919.850.1000
+1.714.491.1517 FAX
+1.919.850.1001 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
© 2014 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
4

Download Report