PIU - Multitone

CE Declaration of
Conformity
Multitone Plant Interface Unit
As the manufacturer, we declare under our sole responsibility that the equipments as specified
below conform to all the applicable essential requirements of the following EU Directives. The
technical documentation required to support this Declaration, is available for inspection by the
relevant enforcement authorities.
Low Voltage Directive 2006/95/EC;
EMC Directive 2004/108/EC;
Article 6.3 of the Radio and Telecommunication Terminal Equipment (R & TTE) Directive
99/5/EC (conditional)*;
RoHS Directive 2011/65/EU (Decision 768/2008/EC Annex II, Module A)
Products Covered By This Declaration:Type of Equipment: Plant Interface Unit for use with Multitone Firecoder systems
Brand Name: Multitone
Component Part Type Designation/Model: P389 (wall-mount unit); P402 (19" rack-mount unit)
Please note that for the purposes of EMC compliance, combinations of this equipment have been
tested as a constituent ancillary device under the terms of the standards listed below and may be
used in conjunction with Multitone and Multitone specified OEM equipments. When used as an
ancillary device connected directly to Radio Paging Systems, the terms of the Directive 99/5/EC
apply and compliance is in accordance with the procedures of Annex II of the Directive and the
technical standards as listed below.
The equipment complies with the limits for a Class A digital device, pursuant to the EU EMC
Directive 2004/108/EC, the limits of which are designed to provide reasonable protection against
harmful interference, when the equipment is operated in a commercial, or light-industrial
environment.
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference.
This equipment is manufactured to meet the RoHS Directive 2011/65/EU restricted substance
thresholds and does not make use of any exemptions.
Multitone Electronics plc is part of Kantone Holdings Ltd, a member of the Champion Technology group of companies.
Registered office: Multitone Electronics plc, Shortwood Copse Lane, Kempshott, Basingstoke, Hampshire, RG23 7NL.
Registered in England & Wales No. 256314. Registered VAT No: GB 232150709.
FM 20122
2
Technical Basis of Conformity:The product(s) identified above, conform(s) to the requirements of the quoted Directives, by
compliance with the following technical standards:Safety - EN 60950-1: 2006 + A2:2013;
EMC – EN 55022: 2010 (Class A); EN 55024: 2010
R&TTE - ETSI EN 301 489-1 v1.9.2; ETSI EN 301 489-2 v1.3.1 *(conditional)
Attention!
The attention of the equipment specifier, purchaser, installer or user, is drawn to the
possibility of special measures and limitations of use which must be observed, in order to
maintain compliance with the above Directives when the product is taken into service.
Details of these measures are contained in the associated product documentation, or are
available upon request from Multitone.
Signed:
Dated: 26th February 2014
B.R.Merchant,
Principal Approvals Engineer,
Multitone Electronics plc
Multitone Electronics plc is part of Kantone Holdings Ltd, a member of the Champion Technology group of companies.
Registered office: Multitone Electronics plc, Shortwood Copse Lane, Kempshott, Basingstoke, Hampshire, RG23 7NL.
Registered in England & Wales No. 256314. Registered VAT No: GB 232150709.
FM 20122

Download Report