[Digitare il testo] Electric Propulsion PRODUCT SHEET Power Processing Unit (PPU) for 5kW Hall Effect Thrusters The Power Processing Unit provides power and control for Hall Effect Thruster used as in-space propulsion systems for station keeping or orbit rising maneuvers. It’s modularity allows to introduce optional thruster switch unit in order to drive two thrusters in cold redundancy, and an internal filter unit, if the PPU is placed close to the thruster. It has been designed for ALTA HT-5k Hall Effect Thrusters, but can be easily customized to drive and control Hall Effects Thrusters from other suppliers. Features Power Section Anode Discharge Cathode Supply (Ignitor/Heater) Magnet Supply Aux DC/DC Converter EMI filters Input Bus Protection Temperature Monitoring Control Section Thermal sensors acquisition Thruster driving voltage and current acquisition Heater driving current acquisition Output voltage and current signals acquisition Voltage set to DC/DC Converters for Anode, Cathode and Magnet coil Operating modes management: start-up, stop, regulated thrust and failure recovery 1 External Telecommand/Telemetry communication PPU for 5kW HETs [Digitare il testo] PRODUCT SHEET Electric Propulsion Technical Information SPECIFICATIONS Thruster Reference HT-5k (Customizable for Hall Effect Thrusters from other suppliers) Thrust Power Level 1.25kW to 5kW Anode Voltage 200V to 400V Cathode Supply Programmable Ignitor High Voltage and Heater Current in order to match different Ignitors and Heaters Input Power Bus Voltage 100V or 50V regulated bus Input Bus Protection Galvanic Isolation TM/TC I/F MIL-STD-1553B Size 350 x 250 x 200 mm³ Mass 13Kg ALTA HT-5k Hall Effect Thruster SITAEL S.P.A | Via San Sabino, 21 - 70042 Mola di Bari (BA) Italy | [email protected] | www.sitael.com Microsatellites Solutions, Small Payloads for Earth Observation and Science, Electric Propulsion Systems, Platform and Payload Avionics. Copyright © 2014 SITAEL S.p.A. All Rights Reserved. 2
© Copyright 2024 ExpyDoc