PISTON PUMP SERIES P1 316XXXXX00

PISTON PUMP
SERIES P1
316XXXXX00
CODE
DESCRIPTION
3161019X00
3161025X00
3161037X00
3161050X00
3161060X00
* 3162 Range is 3162012X00
no longer in the 3162016X00
current range of 3162025X00
3162033X00
pumps*
P1-19-6F/4D
P1-25-6F/4D
P1-37-6F/4D
P1-50-6F/4D
P1-60-6F/4D
P1-12V-6F/4D
P1-16V-6F/4D
P1-25V-6F/4D
P1-33V-6F/4D
PRESSURE
MAX SPEED WEIGHT
(MAX/PEAK)
(rpm)
(kg)
cm3/rev GMP (IMP)
bar
psi
19
4.2
350/400 5100/5800
1800
10/10.5
25
5.5
350/400 5100/5800
1800
10/10.5
37
9.1
350/400 5100/5800
1800
10/10.5
50
11
350/400 5100/5800
1800
10/10.5
60
13.2
300/350 4350/5100
1700
10/10.5
12
1.5
350/400 5100/5800
2400
10/10.5
16
3.5
350/400 5100/5800
2400
10/10.5
25
5.5
350/400 5100/5800
2400
10/10.5
33
7.3
350/400 5100/5800
2400
10/10.5
DISPLACEMENT
STANDARD PUMPS
DELIVERY
HIGH SPEED PUMPS
INPUT POWER
DELIVERY
INPUT POWER
ORDER CODE
3.1.6.X.XXX.X.0.0
Basic Serial Number
Series
1 = Standard pump
2 = High speed pump
MASTER DISTRIBUTOR OF WORLD QUALITY BRANDS
BINOTTO : PZB : MUNCIE : LEDUC : OMSI : DI NATALE BERTELLI : TIPX :
AIRMOBIL : VIME : EU COMP : AMI : SISTEMATICA
MEGA PACIFIC PTY LTD
T+ R- bc1
7 Jersey Avenue, Sandgate, NSW, 2304, AUSTRALIA
Displacement
Mounting flange
1 = 6 Bolt
2 = ISO 4 Bolt
MEGA PACIFIC IS CONSTANTLY ENGAGED IN IMPROVING ITS PRODUCTS AND THEREFORE RESERVES
THE RIGHT TO MODIFY WITHOUT ANY NOTICE CHARACTERISTICS SHOWN
Ph: +61 2 4960 1888
W: www.megapacific.com.au
Rev 2, 101114
PISTON PUMP
SERIES P1
316XXXXX00
VERSION 3.1.6.X.XXX.1.0.0 (6 BOLT)
HYDRAULIC SYSTEM
OIL
Use exclusively good quality hydraulic oil with anti-foam, anti-emulsion and anti-wear additives. The following viscosities are recommended:
Cold climate
22cSt
Temperate climate
37 cSt
Hot climate
46 cSt
FILTRATION
Suction filters should be avoided.
We suggest fitting the filter PZB p/nr. 2.30.003.0000 in the pressure port of the pump.
We recommend using a proper return line filter (25 micron for example).
TANK
The suction line should be approximately 50 mm above the tank floor
and cut at an angle to increate the inlet section.
The return line should enter the tank well below the minimum oil level.
MASTER DISTRIBUTOR OF WORLD QUALITY BRANDS
BINOTTO : PZB : MUNCIE : LEDUC : OMSI : DI NATALE BERTELLI : TIPX :
AIRMOBIL : VIME : EU COMP : AMI : SISTEMATICA
MEGA PACIFIC PTY LTD
T+ R- bc1
7 Jersey Avenue, Sandgate, NSW, 2304, AUSTRALIA
MEGA PACIFIC IS CONSTANTLY ENGAGED IN IMPROVING ITS PRODUCTS AND THEREFORE RESERVES
THE RIGHT TO MODIFY WITHOUT ANY NOTICE CHARACTERISTICS SHOWN
Ph: +61 2 4960 1888
W: www.megapacific.com.au
Rev 2, 101114
PISTON PUMP
SERIES P1
316XXXXX00
VERSION 3.1.6.X.XXX.2.0.0 (4 BOLT)
CLEANING THE HYDRAULIC CIRCUIT
We recommend that flushing of the system be carried out before operating a new
system or after repairs.
Using the PZB Pressure Filter code 2.30.003.0000 is recommended for system
protection.
Ø 51 - G 1 1/4”
OPERATING TEMPERATURE
Oil temperature should be kept above –200C and below 800C.
SUCTION FITTINGS AND HOSES
PZB low restriction suction fittings, as listed below, are recommended for easy
installation.
Properly sized suction hose and clips are available on request.
MASTER DISTRIBUTOR OF WORLD QUALITY BRANDS
BINOTTO : PZB : MUNCIE : LEDUC : OMSI : DI NATALE BERTELLI : TIPX :
AIRMOBIL : VIME : EU COMP : AMI : SISTEMATICA
MEGA PACIFIC PTY LTD
T+ R- bc1
7 Jersey Avenue, Sandgate, NSW, 2304, AUSTRALIA
CODE: 2.17.009.0000
CODE: 2.17.015.0000
MEGA PACIFIC IS CONSTANTLY ENGAGED IN IMPROVING ITS PRODUCTS AND THEREFORE RESERVES
THE RIGHT TO MODIFY WITHOUT ANY NOTICE CHARACTERISTICS SHOWN
Ph: +61 2 4960 1888
W: www.megapacific.com.au
Rev 2, 101114
PISTON PUMP
SERIES P1
316XXXXX00
HIGH PRESSURE FILTER CODE 2.30.003.0000
Designed to protect the hydraulic components
from foreign matter (wielding spatter, swarf,
etc.) in the system.
It screws directly onto the pressure port of the
PZB pump and is joined through a hose with a
banjo fitting.
PATENT PENDING.
SPECIFICATIONS
Filtration capacity
100 µ
Flow:
180 L/min
Max pressure
400 bar
ATTENTION:
 It is necessary to clean the cartridge
(item 3) after initial testing and after any
fault rectification or replacement;
 It is advisable to inspect the filter
cartridge every 300 hours;
 In the event of system problems i.e.
vibration, pressure drop, overheating,
noise etc, check the filter cartridge for
contamination
MASTER DISTRIBUTOR OF WORLD QUALITY BRANDS
BINOTTO : PZB : MUNCIE : LEDUC : OMSI : DI NATALE BERTELLI : TIPX :
AIRMOBIL : VIME : EU COMP : AMI : SISTEMATICA
MEGA PACIFIC PTY LTD
T+ R- bc1
7 Jersey Avenue, Sandgate, NSW, 2304, AUSTRALIA
MEGA PACIFIC IS CONSTANTLY ENGAGED IN IMPROVING ITS PRODUCTS AND THEREFORE RESERVES
THE RIGHT TO MODIFY WITHOUT ANY NOTICE CHARACTERISTICS SHOWN
Ph: +61 2 4960 1888
W: www.megapacific.com.au
Rev 2, 101114

Download Report