UBS KeyDirect EBICS – Verbindungsparameter

How to Order Lightweight Groove Proportioned (LGP) Stump-Type Lockbolts
EXAMPLE: HLGPS18SCV08-06ACY
H LGPS 18SC - V 08 - 06 ACY
Finish Codes
No Suffix = Passivated Pin Plus Cetyl Alcohol Lube (A286 CRES)
No Suffix = Powder Blast Top Surface of Head Plus Cetyl Alcohol Lube (Inconel 718)
No Suffix = Uncoated Pin Plus Cetyl Alcohol Lube (6AL-4V Titanium)(Inconel 718)
AC = Aluminum Coat Plus Cetyl Alcohol Lube
ACY = Aluminum Coat Plus Cetyl Alcohol Lube with Yellow Color on Pintail End
AD = Aluminum Coat Plus Cetyl Alcohol Lube with White Color on Pintail End
APY = Aluminum Coat Plus Cetyl Alcohol Lube Plus Sealant Under Head with Yellow
Color on Pintail End
AS = Anodize "Blue" Plus Cetyl Alcohol Lube
B = Uncoated Pin and No Lube
C = Cadmium Plate Plus Cetyl Alcohol Lube
CB = Cadmium Plate and No Lube
D = Ion Vapor Deposited Aluminum Coat Plus Cetyl Alcohol Lube with Black Color on
Pintail End
EP = Phosphate Fluoride
EPR = Phosphate Fluoride Plus Cetyl Alcohol Lube with Red Color on Pintail End
PB = Powdered Blast Top Surface of Head Plus Cetyl Alcohol Lube
Grip Length
1/16" Increments
Miscellaneous
B = Standard Composite Installation Loads
G = Drill Center Dimple in Head (LGPS2SC)(LGPS2SP)
R = Rolled Locking Grooves
Shank Diameter
1/32" Increments
Material Code
CM = Inconel 718
DT = 8740 Alloy Steel
EU = A286 CRES
V = 6AL-4V Titanium
Head Configuration
2SC = 100° Shear Crown Flush Head (metallic application)
2SP = Shear Protruding Head (metallic application)
4SC = 100° Intermediate Flush Head (metallic application)
4SP = Intermediate Protruding Head (metallic application)
18SC = 100° Close Tolerance Crown Flush Head (metallic application)
Family
Lightweight Groove Proportioned (Stump-Type)
Sealant Escape Groove
H = Sealant Escape Groove Option
NOTE: There are some part numbers with no "-" dashes.

Download Report