Orion 2/2014 - APV Chur

MAGNA
acdc1028
A compact, in-ground, triple LED marker light & wallwash luminaire
delivering 350lm. IP68
D SPG307 Dec 2014
MAGNA
acdclighting.com/LED/MAGNA
CONTENTS
3
Product overview
05
Application images
07
Detailed product performance
09
Product drawings and images
10
Specification codes
11
Driver information
13
Installation instructions
15
Specification sheet
19
Contact details
20
4
MAGNA
acdclighting.com/LED/MAGNA
OVERVIEW
A compact, in-ground, triple LED marker light & wallwash
luminaire delivering 350lm. IP68
Available flush or bezel mounted, with or without visible screw holes
Specified with a 7° tilt as standard, with a 0° tilt option available on request
Available with clear or frosted glass for minimal glare
Aluminium CNC machined to aerospace tolerances.
Suitable for installation in the most challenging of exterior environments
High efficiency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen
maintenance at L70
This product is dual binned within a 2 step MacAdam ellipse to ensure colour
consistency
A range of optics is available to suit every application: 12°, 18°, 30°, 50°
Choice of bezel colour finishes available: stainless steel brushed. Extremely durable
anodised aluminium silver, anodised aluminium black. For especially demanding
environments use hard anodised silver, hard anodised black, chlorine anodised silver,
chlorine anodised black
IP68
5
6
MAGNA
acdclighting.com/LED/MAGNA
Q House, Dublin, Ireland. Lighting Design: Pritchard Themis.
acdc LED product: MAGNA (acdc1028)
7
8
MAGNA
acdclighting.com/LED/MAGNA
PRODUCT PERFORMANCE
MAGNA
MAGNA - Flush Mounted
06.03.2014
2700ºK
80
390
55
331
47
310
43.66
Luminaire: ACDC 1028/30/12R/AAS/DGC/BMF 1028/30/12R/AAS/DGC/BMF
Cree
3
700mA
7.1W
Driver dependent (Typical 0.9)
3000ºK
4200ºK
2 Step MacAdam Ellipse
2 Step MacAdam Ellipse
80
80
438
471
62
66
372
400
52
56
331
342
46.62
48.17
>50,000 hours
Cat1/Code9
66m
30mm
LED Type
LED Quantity
Drive Current
Power Consumption. Including 85% Efficient Driver
PFC
Colour Temp
Initial Colour Accuracy
Colour Stability Over Life. Measured at 6000hrs
CRI
Initial Lamp Lumen Output
Initial Lamp Lumens per Circuit Watt
Lamp
Lumen Output including Thermal & Optical Losses
Project 1
Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt
acdc LED Ltd
Operator Ganesh Prasad
Telephone
Luminaire
Lumen Output
United Kingdom
Fax
e-Mail [email protected]
Luminaire Lumens per Circuit Watt
Lifetime L70. Based on TM-21
ACDC 1028/30/12R/AAS/DGC/BMF 1028/30/12R/AAS/DGC/BMF / LDC (Polar)
Lumen Depreciation LIF Cat/Codes for % depreciation at 10,000hrs
6000ºK
80
521
73
443
62
361
50.85
54mm
MAGNA - Flush Mounted with Sleeve
78mm
Lamps: 1on
x 3 x 12°
LED 3000K
Based
and clear glass
Magna Flush Mouted
with Sleeve
Min depth
125mm
66mm
MAGNA - Bezel Mounted
90m
Magna Bezel Mouted
Based on 3000°K and 12°
66mm
acdc LED Ltd
Page 8
MAGNA - Bezel Mounted with Sleeve
LUX-TSI
Magna Bezel Mounted
With Sleeve
Min depth
125mm
All acdc products are independently tested
in line with LM80 standards, 50,000 hours lifetime
with lumen maintenance at L70
to guarantee product performance.
90mm
Output data figures stated are typical values.
To download photometric files please visit
www.acdclighting.co.uk/led/MAGNA
9
10
MAGNA
acdclighting.com/LED/MAGNA
SPECIFICATION CODES
Finishes
Anodised
Aluminium
Silver
Stainless
Steel
Brushed
Anodised
Aluminium
Black
Hard
Anodised
Silver
Chlorine
Anodised
Silver
Hard
Anodised
Black
Chlorine
Anodised
Black
LED Colour
2700°K 3000°K 4200°K 6000°K
RED
GREEN
BLUE
AMBER
RGB
Optics
12º
18º
30º
50º
Tilt
0º
7º
Mounting
Flush
Flush
with
Sleeve
Bezel
Bezel
with
Sleeve
Diffuser
Clear
Frosted
Order code
MAGNA, Anodised Aluminium Silver, 6000°K, 30°, 7°
Tilt, Flush Mounted with CSK Holes in Bezel, Frosted
Finishes
Anodised Aluminium Silver
Anodised Aluminium Black
Stainless Steel Brushed
Hard Anodised Silver*
Hard Anodised Black*
Chlorine Anodised Silver*
Chlorine Anodised Black*
AAS
AAB
SSB
HAS
HAB
CAS
CAB
LED Colour
2700ºK
3000ºK
4200ºK
6000ºK
Red
Green
Blue
Amber
RGB Colour Change
27
30
42
60
R
G
B
A
RGB
Optics
12°
18°
30°
50°
12R
18R
30R
50R
Tilt
0°
7°
0DEG
7DEG
Mounting Type
Flush Mounted**
Flush Mounted with CSK Holes in Bezel***
Bezel Mounted
Bezel Mounted with CSK Holes in Bezel
FMF
FMS
BMF
BMS
Diffuser
Clear
Frosted
Additional Option
Installation Sleeve Option
Emergency Pack
For an emergency conversion pack
please specify
acdc1028 / AAS / 60/ 30R / 7DEG / FMS/ DGF
DGC
DGF
acdc1703
acdc1957
*Upon request, minimum order quantities apply
**Not for use with sleeve
***For use with installation sleeve only
11
12
MAGNA
acdclighting.com/LED/MAGNA
SPECIFICATION CODES
Switched
Switched
MAGNA
Driver Code
Dimensions
Weight
Input Voltage
Current
Power Consumption
Dimming Range
Channels
Number of products driven
per driver
Live
Neutral
Images are for illustrative purposes only.
1-10v
acdc1900/A/700/SWT/None
110 x 52 x 23.5 mm
100g
110-240Vac
700mA
20W @ 230V
None
1
acdc1900/B/700/SWT/None
180 x 32 x 32 mm
120g
220 - 240Vrms
700mA
33W
None
1
1
2-4
1-10v
MAGNA
Driver Code
Dimensions
Weight
Input Voltage
Current
Power Consumption
Dimming Range
Channels
Number of products driven
per driver
Live
Neutral
1-10v Dimmer
Images are for illustrative purposes only.
Phase
acdc1900/A/700/1-10/Solo
110 x 52 x 23.5 mm
100g
110-240Vac
700mA
20W @ 230V
0%-100%
1
acdc1900/B/700/SWT/None
180 x 32 x 32 mm
120g
220 - 240Vrms
700mA
33W
None
1
1
2-4
Phase
MAGNA
Live
Neutral
Driver Code
Dimensions
Weight
Input Voltage
Current
Power Consumption
Dimming Range
Channels
Number of products driven
per driver
Dimmer
Images are for illustrative purposes only.
DALI
acdc1900/A/700/Pha/None
99mm x 39mm x 23.5mm
70g
230-240V AC
700mA
10.5W max
Min 20%
1
acdc1900/B/700/SWT/None
180 x 32 x 32 mm
120g
220 - 240Vrms
700mA
33W
None
1
1
2-4
DALI
MAGNA
Live
Neutral
Driver Code
Dimensions
Weight
Input Voltage
Current
Power Consumption
Dimming Range
Channels
Number of products driven
per driver
Dali Bus
Isolated Dali Interface
Images are for illustrative purposes only.
DMX
acdc1900/A/700/Dali/Solo
210 x 40.4 x 33.5mm
225g
AC 120-277V / DC 120-250V
700mA
30w
0%-100%
1
acdc1900/C/700/DALI/Solo
180 x 32 x 32 mm
120g
220 - 240Vrms
700mA
30W
Off, 10%-100%
1
1
2-4
DMX
Live
Neutral
Ground
DMX in DMX in +
DMX in shield
13
3 LED Groups
3 Control Channels
MAGNA
All images shown above are for illustrative purposes only.
Please refer to installation instructions for complete details
Driver Code
Dimensions
Weight
Input Voltage
Current
Power Consumption
Dimming Range
Channels
Number of products driven
per driver
acdc1900/E/700/DMX/Multi
388 x 42 x 30 mm
705 g
120 - 277 VAC
700
100W max
0.1%-100%
3
4 per Ch x 3ch
14
MAGNA
acdclighting.com/LED/MAGNA
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
MAGNA
acdc1028
MAGNA- Sleeveless
1
A
B
8000mm
6000mm
4000mm
ø66mm
90mm
7º
A
2000mm
Magna
RGB
B
2000mm 0.5mm
2
Ch1
+
Brown Black
Red
Black
+
Ch2
-
Green Yellow
+
Blue
Ch3
30mm
ø54mm
-
White
A
3
2
A 50mm 100mm 150mm 200mm 300mm
e installed by a qualified
n must be carried out in
e with local regulations
ains power to the driver
lation and any subsequent
ng / re-connecting at
• À n’installer que par un électricien
qualifié.
• L’installation doit être réalisée conformément aux réglementations locales.
• Désactivez l’alimentation électrique
du convertisseur pendant l’installation et
en cas de déconnexion/re-connexion
au niveau de l’appareil d’éclairage.
• Utilisez la bonne polarité lors du
câblage.
• En cas de doute, appelez la ligne
d’aide à l’installation (reportez-vous
au numéro ci-dessous – en anglais
seulement) ou visitez le site
acdclighting.co.uk/distribution-network
pour les coordonnées de votre équipe
d’assistance locale.
• Ne couvrez pas les luminaires ou les
convertisseurs avec une protection
d’isolation thermique ou de vapeur
(consultez le guide relatif aux volumes
d’air à respecter).
• Les luminaires acdc sont conçus pour
des applications d’éclairage et ne
doivent pas être utilisés à d’autres fins.
• L’installazione di questo prodotto
deve essere effettuata solamente da un
elettricista qualificato.
• L’installazione di questo prodotto
deve essere effettuata conformemente
alle normative locali.
• Durante l’installazione e l’esecuzione
di eventuali operazioni successive di
connessione/disconnessione degli
accessori, scollegare il driver dall’alimentazione elettrica.
• Durante i cablaggi, impostare le
polarità corrette.
• In caso di dubbi, contattare il Supporto tecnico (chiamando il numero
indicato di seguito; l’assistenza verrà fornita esclusivamente in lingua l’inglese)
oppure visitare il sito web
acdclighting.co.uk/distribution-network
per ottenere i recapiti del Servizio
tecnico della propria zona.
• Non coprire gli apparecchi di illuminazione o i driver con materiali di isolamento termico o schermi antivapore (v.
guida sugli spazi d’aria).
• Gli apparecchi di illuminazione acdc
sono studiati per applicazioni luminose.
È pertanto vietato qualsiasi altro tipo
di utilizzo.
• La instalación debe ser realizada por
un electricista cualificado.
• La instalación debe hacerse de conformidad con la normativa local.
• Desconecte la corriente principal del
driver o fuente de alimentación durante
la instalación y cualquier posterior desconexión / conexión en los accesorios.
• Use la polaridad correcta en el
cableado.
• Si tiene dudas durante la instalación
contacte el teléfono de ayuda (véase
número a continuación - solo en inglés)
o visite acdclighting.co.uk/distribution-network para obtener información
de contacto sobre su equipo de
soporte local.
• No cubra las luminarias ni drivers o
fuentes de alimentación con aislamiento térmico o barreras de vapor (ver guía
sobre aireación).
• Las luminarias acdc se han diseñado
para aplicaciones de iluminación y no
deben usarse para ningún otro fin.
• Darf nur durch einen qualifizierten
Elektriker installiert werden.
• Die Installation muss gemäß den örtlichen Vorschriften ausgeführt werden.
• Schalten Sie den Netzstrom zum
Treiber während der Installation und
während aller späterer Demontagen/
erneuten Montagen am Anschluss aus.
• Beachten Sie bei der Verkabelung
die Polarität.
• Bei jeglichen Zweifeln wenden Sie sich
4
an den Installations-Informationsdienst
(siehe Nummer unten – nur englischsprachig) oder besuchen Sie
acdclighting.co.uk/distribution-network
füt Kontaktangaben zu Ihrem regionalen Supportteam.
• Bedecken Sie die Leuchten oder
Treiber nicht mit einer Wärmeisolierung
oder Dampfsperre (siehe Anleitung für
Luftzwischenraum).
• acdc Lampen wurden für Beleuchtungsanwendungen konzipiert und
dürfen nicht zweckentfremdet werden.
.‫• يجب تركيب املنتج من قبل فني كهربايئ متخصص‬
.‫• يجب إجراء الرتكيب وفقًا للوائح املحلية‬
‫• قم بإيقاف تشغيل موصالت الطاقة الرئيسية للمحرك‬
‫إعادة توصيل يف وقت‬/‫أثناء الرتكيب وقم بأي فصل‬
.‫الحق عندما يكون ذلك مناسبًا‬
.‫• استخدم القطبية الصحيحة عند توصيل األسالك‬
‫ اتصل بخط مساعدة (انظر‬،‫• يف حالة وجود أي شك‬
‫الرقم أدناه – التحدث باللغة اإلنجليزية فقط) أو‬
‫قم بزيارة‬
• केवल योग्यताप््ाप्त इलेक्ट््ीशियन द्वा्ा ही
स्थाशपत शकया जाना है.
• स्थानीय शवशनयमों के अनुसा् ही स्थापना की
जानी चाशहए.
• स्थापना के दौ्ान तथा बाद में शिशटंग प् होने
वाली शिस-कनेशक्टंग / श्-कनेशक्टंग के दौ्ान
ि््ाइव् की मेन्स पाव् बंद ्खें.
• वायश्ंग क्ते समय सही शवद्युत संकेतों
(पॉशजशटव व नेगेशटव चाज््) का प््योग क्ें.
• यशद कोई िंका हो तो स्थापना हेल्पलाइन (नीचे
6 है) से
नंब् देखें – केवल अंग््ेजी बोली जाती
संपक्् क्ें अथवा अपने स्थानीय सहायता टीम के
संपक्् शवव्ण के शलए
acdclighting.co.uk/distribution-network
प् जाएँ.
• ल्यूशमनै् या ि््ाइव्ों को ऊष्मा ्ोधन या
वाष्प अव्ोध से न ढँकें(वायु स्थान शदिाशनदे््ि
देखें).
• acdc ल्यूशमनै्, प््काि अनुप््योगों के शलए
शिज़ायन शकए गए हैं तथा इन्हें शकसी भी अन्य
उद्देि्य के शलए प््युक्त नहीं शकया जाना चाशहए.
• Only to be installed by a qualified electrician
• Installation must be carried out in accordance with local regulations
• Turn off mains power to the driver during installation and any subsequent dis-connecting / rect polarity when wiring. If
t contact theconnecting
installation
at the fitting
e number below).
ver the luminaires or drivers
•orUse
correct
polarity when wiring. If in any doubt contact the installation helpline (see number
l insulation
vapour
barrier
ce guidance)
below).
naires are designed
for
lications and must not be
• Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space
y other purpose
guidance)
tie mag uitsluitend
worden
• acdc
luminaires are designed for lighting applications and must not be used for any other
door een erkend elektricien.
tie moet worden
uitgevoerd
purpose
emming met de plaatselijke
.
e netvoeding van de driver
e installatie en het eventuele
/weer aansluiten op de
aansluiten van de bedradiste polariteit.
eemt u contact op met de
plijn (u vindt het telefoonronder, hulp is alleen beshet Engels) of u gaat naar
g.co.uk/distribution-network
tactgegevens van het
ngsteam in uw regio.
maturen of drivers niet af
ch-isolatiemateriaal of
e (zie de ruimterichtlijnen).
n van acdc zijn ontworpen
ingstoepassingen en
voor andere doeleinden
bruikt.
• Får endast installeras av behörig
installatör.
• Installation måste utföras i enlighet
med lokala bestämmelser.
• Stäng av nätspänning till drivdon
under installation och under all efterföljande frånkoppling/återanslutning.
• Kontrollera polariteten innan anslutning till nätspänning.
• Om du har några funderingar;
kontakta supportlinjen (engelsktalande
- se telefonnummer nedan) eller besök
acdclighting.co.uk/distribution-network
för kontaktinformation till din lokala
acdc-representant.
• Armatur och drivdon får under inga
omständigheter övertäckas (se guide
för minsta avstånd och luftutrymme).
• acdc armaturer är designade för
belysningsapplikationer och får inte
användas i annat syfte.
ation Helpline +44 (0) 845 862 6400
15
必须由合格的电工安装。
安装过程必须符合当地法规。
在安装过程中及日后灯具正常连
接/断开的情况下，确保连接驱动器
的总电源处于关闭状态。
• 接线时确保正负极连接正确。
• 如有任何疑问，请联系安装热线（
号码如下，仅限英语会话），或访问
•
•
•
acdclighting.co.uk/distribution-network
获取当地支持团队的联系方式。
• 切勿将隔热或隔气材料覆盖在灯或
驱动电源上（请参见空间指南）。
• acdc 灯主要应用于照明解决方
案，不得用于其他用途。
acdclighting.co.uk/distribution-network
‫ملعرفة املزيد حول تفاصيل االتصال بفريق الدعم‬
.‫املحيل‬
‫• ال تغطي مصابيح اإلنارة أو املحركات بالعزل الحراري‬
.)‫أو حاجز البخار (راجع إرشادات املجال الجوي‬
‫ مصممة لتطبيقات اإلضاءة فقط‬acdc ‫• مصابيح إنارة‬
.‫ويجب عدم استخدامها يف أي أغراض أخرى‬
IP68
IP68
IP68
5
7°
INS-1213 F ISSUED 30/07/2014 APPROVED BY XY
16
MAGNA
acdclighting.com/LED/MAGNA
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
MAGNA with sleeve
acdc1028
MAGNA with Sleeve
1
A
B
ø78mm
125mm
A
Magna
RGB
B
2000mm 0.5mm
2
Ch1
+
Brown Black
Red
Black
+
Ch2
-
Green Yellow
+
Blue
Ch3
-
White
3
2
IP68
IP68
4
IP68
5
6
7°
17
18
acdclighting.com/LED/MAGNA
Specification sheet
MAGNA
acdc1028
A compact, in-ground, triple LED marker light &
wallwash luminaire delivering 350lm. IP68
Flush mounted
Flush with sleeve
Bezel mounted
78mm
66m
Bezel with sleeve
90m
Magna Bezel Mouted
Magn
W
66mm
66mm
54mm
90mm
Min depth
125mm
Min depth
125mm
30mm
Magna Flush Mouted
with Sleeve
Luminaire
Performance
Material: Aluminium CNC machined to aerospace tolerances
Finish: Bezel colour options: stainless steel brushed. Extremely durable
anodised aluminium silver, anodised aluminium black. For especially
demanding environments use hard anodised silver*, hard anodised
black*, chlorine anodised silver*, chlorine anodised black*
Format: Available flush or bezel mounted, with or without visible screw
holes.
Beam angles: 12°, 18°, 30°, 50°.
Accessories: Installation sleeve - acdc1703
Installation: Suitable for installation in the most challenging of exterior
environments.
Adjustability: Specified with a 7° tilt as standard, with 0° tilt option.
Temperature range: From -10°C to 40°C
Cut out: See drawing above
*Upon request. Minimum order quantity applies.
Lumen Maintenance: High efficiency LEDs tested to LM80 standards,
50,000hrs lifetime with lumen maintenance at L70.
Initial lamp Lumen output*: 438lm
Lamp lumens inc thermal and optical losses*: 372lm
Luminaire Lumens output*: 331lm
Power consumption (inc 85% efficient driver): 7.1W
Efficacy (Lm/W)*: 47
CRI: 80
Binning: Dual binned for optimum colour consistency across a
project - 2 step MacAdam ellipse.
LED Colour: 2700ºK, 3000ºK, 4200ºK, 6000ºK, R, G, B, A, RGB
Driver: Switched, 1-10v, Phase, Dali, DMX
Listings: CE, ETL us/c
IP rating: IP68
Warranty: 5 years
Weight: Stainless steel bezel 550g, Aluminium flush 430g
*based on 3000ºK with 12º optics
Specification Codes
Product
acdc1028
Bezel Finishes
Anodised Aluminium Silver
AAS
Anodised Aluminium Black
AAB
Stainless Steel Brushed
SSB
Hard Anodised Silver
HAS
Hard Anodised Black
HAB
Chlorine Anodised Silver
CAS
Choline Anodised Black
CAB
LED Colour
2700ºK
27
3000ºK
30
4200ºK
42
6000ºK
60
R
R
G
G
B
B
A
A
RGB
RGB
Optics
Tilt
Diffuser
Mounting Type
12º
15R
0º
0DEG
Flush Mounted
18º
24R
7º
7DEG
30º
36R
Flush mounted
with CSK Holes in Bezel
FMS
45R
Bezel Mounted
BMF
Bezel Mounted
with CSK Holes in Bezel
BMS
50º
FMF
Clear Glass
DGC
Frosted Glass DGF
acdc1028
Additional option: Installation sleeve acdc1703
Driver options
Driver
acdc1900
acdc1900
No. of Luminaires
if known
Current
700mA
Dimming
Type
SWT
1-10
Phase
DALI
DMX
700mA
IP68
Specification subject to change without notice. Refer to our website for the most recent product documentation.
acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
19
D SPG307 Dec 2014
MAGNA
CONTACT
acdclighting.com/LED/MAGNA
CONTACT US
Head Office
Wordsworth House
Vantage Court, Riverside Way
Barrowford
Lancashire
UK
BB9 6BP
Tel: +44 (0) 845 862 6400
Fax: +44 (0) 845 862 6401
Email: [email protected]
Manufacturing
Innovation Works
Gisburn Road
Barrowford
Lancashire
UK
BB9 8NB
Tel: +44 (0) 845 862 6400
London Studio
Ground Floor
Central Block
Green Mews
Bevenden Street
London
N1 6AS
Sales Tel: +44 (0) 845 862 6400
Deliveries Tel: +44 (0) 845 862 6458
Email: [email protected]
Dubai Office
Office 405, Goldcrest Executive Tower
Cluster C - Jumeirah Lakes Towers (JLT)
P.O. Box 643811
Dubai
United Arab Emirates
Tel: +971 (0) 4 3617365
Email: [email protected]
USA Office
acdc corp, 841 E Fort Ave, #276
Baltimore, MD 21230
USA
Tel: +1 (410) 220 0088
Email: [email protected]
Global Distribution Network
We have an established and growing global network of over 60 distributors and consider them a
vital extension to our British, Dubai and North American based export teams.
This ensures that all customers receive the same outstanding level of world-class service and
knowledge regardless of the location of your project.
For contact details of our distribution partners, please visit
acdclighting.com/contact/distribution-network/ or contact [email protected]
Specification subject to change without notice. Refer to our website for the most recent product documentation.
20
21