Schedule of Accreditation issued by United Kingdom Accreditation Service 21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Issue No: 014 Issue date: 15 January 2015 0001 Type A Inspection Body 17 York Street Contact: Mr Richard Green Manchester Tel: +44 (0)161 235 3069 M2 3RS Fax: +44 (0)161 235 3702 E-Mail: [email protected] Accredited to ISO/IEC 17020:1998 Website: www.rsagroup.com Inspection performed at/from the above address only DETAIL OF ACCREDITATION Field of Inspection Type and Range of Inspection Methods and Procedures Pressure Equipment Design Verification, New Construction and Inspection RSA Procedure 02-140-P31 and 05-120-P38 referencing published national/ international standards for pressure equipment Welding Procedures and Welder Approvals Verification and Approval RSA Procedure 02-140-P22 Major, Intermediate and Minor Pressure Systems Certification of written schemes of examination and in-service inspection Pressure System Safety Regulations 2000 SI 2000, No 128 RSA Procedure 05-20-P01 and 05-10-P16 Power Presses In-service inspection Provision and Use of Work Regulations 1998 - SI.1998 No 2306, Part IV (PUWER 98) RSA Procedure 05-54-R027.1 to R043.4 Lifting Equipment In-service inspection Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 98), SI.1998 No 2307 RSA Procedure 05-50-R002.1 to 05-50-R040.2 Local Exhaust Ventilation Plant (LEV) Initial Appraisal and In-service Inspection/Thorough Examination and Test of Engineering Controls Control of Substances Hazardous to Health Regulations 2002 Control of Substances Hazardous to Health Regulations (N.I.) 2003 RSA Procedure 05-53-R017.1 to 05-53-R017.4 END Assessment Manager: NH1 Page 1 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Type A Inspection Body Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection Category of products or individual products Methods / Procedures Essential requirements: Product specification/ Properties / Standards The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment Regulations 2009 (as amended) AND The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment (Northern Ireland) Regulations 2010 (as amended). PART 3 of the Approved Derogations & Transitional Provisions. Periodic inspection & Intermediate inspection. Exceptional checks: 4.5 – 4.5.7 Type Approval Supervision of construction Initial inspection and test Assessment Manager: NH1 UK road, and rail, tanks* constructed before 10/05/04. VCA Procedures for Inspection & Testing of UK Tanks Metallic tanks. Vacuum-operated waste tanks. for substances of Class(s) 2, 3, 4, 5, 6, 8 & 9 RSA procedures 02-140P34 and P35 UK Road tanks for LPG * constructed in GB after 09/05/2004 or in NI after 31/07/06 to EN 12493, Annex C. EN 12972:2007 RSA procedures 02-140P34 and P35 UK Road tanks for LPG * th constructed in GB after 9 May 2004 or in NI after 31/07/06 to EN 12493, Annex C. EN 12972:2007 RSA procedures 02-140P34 and P35 Page 2 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Type A Inspection Body Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection Category of products or individual products Methods / Procedures Essential requirements: Product specification/ Properties / Standards RID, ADR Chapter 6.8 Chapter 6.10 Periodic inspection & Intermediate inspection. Exceptional checks: 4.5 – 4.5.7 Tanks with shells of Metallic Materials* (chapter EN 12972:2007 RSA procedures 02-140P34 and P35 Type Approval Initial inspection and test 6.8) Fixed tanks (road tanks) Tank wagons (rail tanks) Demountable tanks Tank containers Tank swap bodies Battery vehicles (road) Battery wagons (rail) MEGCs EN13530: 2002 EN14025: 2008 Vacuum Operated Waste Tanks* (chapter 6.10) for substances of Class(s) 3, 4, 5, 6, 8 & 9 The Transportable Pressure Equipment Directive 2010/35/EU Article 12 of the Directive 2010/35/EU +1.8.7 of the Annexes 2008/68/EC Periodic inspection & Intermediate inspection. Exceptional checks: 4.5 – 4.5.7 Conformity assessment Conformity reassessment Supervision of construction Initial inspection and test Tanks with shells of Metallic Materials* (chapter EN 12972:2007 6.8) RSA procedures 02-140P34 and P35 Fixed tanks (road tanks) Tank wagons (rail tanks) Demountable tanks Tank containers Tank swap bodies Battery vehicles (road) Battery wagons (rail) MEGCs EN13530: 2002 EN14025: 2008 PD5500: 2009 +A2: 2010 ASME VIII: Div 1 ASME VIII: Div 2 for substances of Class 2 ADR, RID* (Chapter 6.2) Assessment Manager: NH1 Conformity assessment including: Type Approval Supervision of manufacture Initial inspection and test Periodic inspection, intermediate inspection, and exceptional checks Cryogenic vessels – Transportable vacuum insulated, of not more than 1000 litres volume. EN1251-2:2000 RSA procedures 02-140P35 and 36 Page 3 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Type A Inspection Body Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection Category of products or individual products Methods / Procedures Essential requirements: Product specification/ Properties / Standards The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment Regulations 2009 (as amended) AND The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment (Northern Ireland) Regulations 2010 (as amended) The Merchant Shipping (Dangerous Goods and marine Pollutants) regulations 1997 ADR, RID* & IMDG Code Chapter 6.2 RID, ADR & IMDG Code, Chapter 6.7 Conformity assessment including: Type Approval Supervision of manufacture Initial inspection and test Periodic inspection, intermediate inspection, and exceptional checks Cryogenic vessels – Transportable vacuum insulated, of not more than 1000 litres volume. EN1251-2:2000 Periodic inspection & Intermediate inspections. Exceptional checks: 4.5 – 4.5.7 Portable Tanks* for substances of Class(s) 2, 3, 4, 5, 6, 8 & 9 EN 12972:2007 IMO Res A.581 (14) RSA procedures 02-140P34 and P35 RSA procedures 02-140P35 and 36 EN13530: 2002 EN14025: 2008 PD5500: 2009 +A2: 2010 ASME VIII: Div 1 ASME VIII: Div 2 Type Approval Supervision of construction Initial inspection and test IMDG Code, Chapter 6.7 Type Approval Supervision of construction Initial inspection and test Offshore tank-containers* MSC/Circ.860 EN 12079-1: 2006 RSA procedures 02-140P34 and P35 The Merchant Shipping (Dangerous Goods and marine Pollutants) regulations 1997 Periodic inspection & Intermediate inspections. Exceptional checks IMO Type 1,2,5 & 7 Portable tanks* DSC/Circ.12 IMO Res A.581 (14) IMO Type 4,6 & 8 Road tank vehicles* Note: The inspection of items marked thus * or ** are subject to legislative requirements including the appointment of ‘persons’ to carry out inspections. Reference should be made to the VCA Dangerous Goods Office for information on this and listings of bodies recognised under UK legislation. END Assessment Manager: NH1 Page 4 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Type A Inspection Body Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011 Methods / Procedures Essential Conformity Assessment Category of products or Directive/Regulation requirements: procedure/Module/Article individual products Product specification/ Properties / Standards Pressure Equipment Directive 97/23/EC implemented by; Pressure Equipment Regulations 1999 (SI 2001) Directive: Article 10:Annex III Regulation: 12 - Schedule 4 All descriptions of pressure equipment and assemblies covered by the Regulations. RSA Procedures Directive: Article 11 Regulation: 17 - Schedule 7 Issuing European Approval of Materials RSA Procedures Directive: Annex I – 3.1.2 Regulations: Schedule 2 – 3.1.2 Categories II III and IV RSA Procedures Conformity Assessment Modules A1, B, B1, C1, D, D1, E, E1, F, G, H, H1 Approval of permanent joining procedures and personnel Directive: Annex I – 3.1.3 Regulations: Schedule 2 – 3.1.3 Categories III and IV Inspection Body Procedures Approval of personnel to carry out non-destructive test on permanent joints for pressure equipment Directive: Article 14 Regulation: 22 User Inspectorate Modules A1, C1, F, G Simple Pressure Vessels Directive 2009/105/EC Implemented by The Simple Pressure Vessels (Safety) Regulations 1991 (as amended) Assessment Manager: NH1 EC type-examination Directive: Article 10 Regulation 11 All descriptions of pressure equipment and assemblies covered by the Regulations. Inspection Body Procedures Simple Pressure Vessels manufactured in series BS EN 286-1 1998+A2:2005 EC declaration of conformity Directive: Articles 12, 13 and 14 Regulation 13 EC verification Directive: Article 11 Regulation 12 Page 5 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Type A Inspection Body Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011 Methods / Procedures Essential Conformity Assessment Category of products or Directive/Regulation requirements: procedure/Module/Article individual products Product specification/ Properties / Standards Lifts Directive 95/16/EC implemented by; Directive: Annex V B Regulation: Schedule 5 B Lifts RSA Procedures Lifts RSA Procedures Lifts RSA Procedures Lifts RSA Procedures Lifts RSA Procedures Safety Components RSA Procedures Safety Components RSA Procedures Safety Components RSA Procedures EC Type-examination The Lifts Regulations 1997 (as amended) Directive: Annex VI Regulation: Schedule 6 Final Inspection Directive: Annex X Regulation: Schedule 9 Unit verification Directive: Annex XIII Regulation: Schedule 12 Full quality assurance Directive: Annex XIV Regulation: Schedule 13 Production quality assurance Directive: Annex V A Regulation: Schedule 5 A EC Type-examination Directive: Annex IX Regulation: Schedule 8 Full quality assurance Directive: Annex VIII Regulation: Schedule 7 Production quality assurance Assessment Manager: NH1 Page 6 of 7 S c he dul e of Ac c r e di ta ti on issued by United Kingdom Accreditation Service 21 - 47 High Street, Felt ham, Mi ddl esex, TW 13 4UN, UK 0001 Royal and SunAlliance - Engineering Practice Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services Type A Inspection Body Issue No: 014 Issue date: 15 January 2015 Accredited to ISO/IEC 17020:1998 Inspection performed at/from main address only Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011 Methods / Procedures Essential Conformity Assessment Category of products or Directive/Regulation requirements: procedure/Module/Article individual products Product specification/ Properties / Standards Machinery Directive 2006/42/EC implemented by: Directive: Article 12 (3)b and (4)a :Annex IX Regulation: Schedule 2 Part 9 The Supply of Machinery(Safety) Regulation 2008 (SI 1597) EC Type Examination Directive: Article 12 (3)c and (4)b :Annex X Regulation: Schedule 2 Part 10 Annex IV item 17 RSA Procedures Part 4 Item 17 Annex IV item 17 RSA Procedures Part 4 Item 17 Full Quality Assurance Note: The inspection of items above are subject to legislative requirements including the appointment of bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments BIS for information on this and listings of bodies recognised under UK legislation END Assessment Manager: NH1 Page 7 of 7
© Copyright 2024 ExpyDoc
![A Closer Look at Infrared Therography [ PDF 905 kB ]](http://s3.expydoc.com/store/data/000172676_1-2fce98d3844d9921bc0ecb198bc73aa4-250x500.png)
