COATING PORTOFOLIO PfC Performance Line HPfC High

COATING PORTOFOLIO
PfC Performance Line
HPfC High Performance Line
Drilling Line
PfC TiN
PfC AlTiN M
HPfC Harddrill
HPfC Deephole
HPfC Alu
HPfC Titan
HPfC Composite
Thickness range
Coating Type
3.0 - 3.5 μm
Monolayer
3.0 - 3.5 μm
Monolayer
3.0 - 3.5 μm
AlTiSiN based
3.0 - 3.5 μm
AlTiSiN + TiX2
2.0 - 2.5 μm
hard & low friction
2.0 - 2.5 μm
AlTiXCN Multilayer
1.2 - 1.7 μm
TiSiCN based
Typical
applications
General Purpose
HSS
General Purpose
Carbide
Forged materials
Hardened Steels
Deep drilling
Drilling Alu with
and without silicon
Titanium alloys
Stainless steel
CFRP
Color
gold
purple
red-brown
red-brown/barley
barley
silver
light orange
Milling Line
PfC AlTiN M
PfC AlTiN N
PfC AlTiCrN/AlCrN
HPfC Hardmill
HPfC Titan
HPfC Alu
HPfC Composite
Thickness range
Coating Type
3.2 - 4.0 μm
Multilayer
2.3 - 2.8 μm
Nanolayer
3.0 - 3.5 μm
Gradient Layer
3.0 - 3.5 μm
AlTiSiN based
2.0 - 2.5 μm
AlTiXCN Multilayer
2.6 - 3.0 μm
low friction
1.2 - 1.7 μm
TiSiCN based
Typical
applications
HSS Steels
Roughing
Carbide endmills HSM
Finishing upto 50 HrC
Roughing steels
and cast iron
Forged materials
Hardened Steels
Titanium alloys
Stainless steel
Dry and Mist lubric
Alu milling
CFRP
Color
violet
violet
violet
red-brown
silver
grey-violet
light orange
Tapping Line
PfC TiN
PfC TiCN
PfC CrN
HPfC Tap FormX³
HPfC TiCrN+
HPfC Alu
Thickness range
Coating Type
2.5 - 3.0 μm
Monolayer
2.0 - 2.5 μm
Gradientlayer
2.0 - 2.5 μm
Monolayer
2.3 - 2.8 μm
TiCrN based
2.3 - 2.8 μm
TiCrN based
2.0 - 2.5 μm
hard & low friction
Typical
applications
General purpose
Form tapping in
ferrous materials
Low speed tapping,
tapping in Cu
High performance
form tapping
up to 40 HrC
High performance
cutting taps and
carbide inlays
Cutting and form
tapping Aluminium
with and without Si
Color
gold
rose
grey
light brown
grey
barley
Gear Cutting Line
PfC TiN
PfC TiCN
PfC AlTiN
HPfC Gear
HPfC Dry Gear
HPfC Alu
Thickness range
Coating Type
4.0 - 5.0 μm
Monolayer
3.0 - 4.0 μm
Multilayer
3.0 - 4.0 μm
Gradient Layer
3.0 - 4.0 μm
AlTiCrN / AlTiN
2.5 - 3.0 μm
AlTiSiN based
2.6 - 3.0 μm
low friction
Typical
applications
Low cutting speed Large
module hobs Soft steels
Shaping - Hardened
materials
High speed - Wet
machining
High speed
Dry machining
Wet bevel gear cutting
Very high speed
dry hobbing - bevel
gear cutting - PM and
carbide hobs
Machining of
Al-gears
Color
gold
rose
purple
purple
red-brown
barley
Micro Line
HPfC AlTiN
HPfC Hardmicro
HPfC Alu
Thickness range
Coating Type
0.2 - 0.8 μm
AlTiN based
0.2 - 0.8 μm
AlTiSiN based
2.0 - 2.5 μm
hard & low friction
Typical
applications
Steels
Hardened steels
Aluminium
Plastics
Color
purple
red-brown/barley
barley
for Europe: PerformCoat Germany
Ferdinand-Porsche-Str. 10
88451 Dettingen-Iller Germany
[email protected]
Tel. +33 676 332598
for Americas: PerformCoat of North America
319 McIntyre Lane
Springfield, Mi 49037 US
[email protected]
Tel. +1 865 321 3932
for Japan:
Nobu Fujita
324-4 Nozomigaoka
Meitu-ku 465-0046 Nagoya Japan
[email protected]
Tel. +81 90 9043 5385
for Rest of Asia:
PerformCoat of Asia
6F.,No.348, Sec.7,
Chengteh Rd. Taipei, Taiwan
[email protected]
Tel. +886 (02) 28 28 27 50
we listen... we understand... we deliver!

Download Report