Allura Desposible

Allura Vap Re-‐Breather (Disposable) Description: The Allura Vap Re-‐Breather (Disposable) is meant be a disposable device. It has a spot for a common lanyard right below the mouthpiece.(Figure 1) The mouthpiece is made from moldable plastic and is designed with a colander like area for free airflow.(Figure 1) This portion is wrapped in a special filtration cloth similar to a t-‐shirt and then coated with anti-‐microbial mesh/anti-‐micro particle material.(Figure 2) This fitted piece is then fit inside a similar, but bigger, colander like piece.(Figure 3) This portion is then fitted(Figure 5) with a sponge like material used to condense exhaled electronic cigarette vape.(Figure 4) It is covered by an external cage, which is made from the same moldable plastic and is used to hold everything in place. (Figure 6) Final and/or Completed device. (Figure 7) User: The user will use the Allura Vap Re-‐Breather (Disposable) in two possible ways. 1) It will be used as disposable and non-‐attached re-‐breather 2) as an accessory device attached to an electronic cigarette vaporizer with the use of a lanyard. Purpose: The purpose of the Allura Vaporizer Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vap Re-‐Breather (Bottom Fit/Stand) Description: The Allura Vap Re-‐Breather (Bottom Fit/Stand) is meant to fit on the bottom of most common Electronic cigarette vaporizers. It has a spot for a common lanyard right above(Figure 2) the exhaust breathing holes.(Figure 3) Below is a housing compartment with a threaded tip.(Figure 4) The threaded tip is meant to fit gripped cap specially designed with a large breathing port on the bottom.(Figure 5) The housing compartment is used to house a specially designed disposable and fillable insert. The insert is specially designed to filter out any micro-‐particles, microbial agents, and condense exhaled electronic vaporizers vapor, into non-‐
visible air. (Figure 6) Final Device (Figure 1) * The filter is the same material used on all devices that has a top breathable material with a next Anti-‐partial and Anti-‐microbial agent. The next layer is an Anti bacterial sponge material used to condense water vapor. The bottom side is the same material uses as a bottom breathable material. (Figure 6) User: The user will use the Allura Vap Re-‐Breather (bottom fit/ Stand) in three possible ways. 1) It will be used as fixed to a common E-‐go style electronic vaporizer mod as a fixed piece able to be removed at will. 2) As an electronic vaporizer Stand. 3) and as an non-‐attached device, with an attached lanyard (or not) for its intended purpose. Purpose: The purpose of the Allura Vaporizer Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vap Re-‐Breather (Disposable 2-‐ Dual tip adaptor for disposable tank) Description: The Allura Vap Re-‐Breather (Disposable 2-‐ Dual tip adaptor for disposable tank) is meant be a disposable device. The disposable 2 is made out of low cost moldable plastic. The first piece is cylindrical colander like cylinder.(Figure 3 on #2 and Figure 1 on #4) This piece is also designed with a re-‐breathing tip much like the included tank tip adaptor. (Figure 2 on #2 and Figure 5 on #4)This tip, although similar, is designed to exhale through. It is filled with a micro-‐particle material to filter out micro-‐particles.(Figure 2 on #4) Then the outside is wrapped in an anti bacterial sponge like material used to condense the electronic e cigarette vapor.(Figure 3 on #2 and Figure 3 on #4)This piece is then surrounded by another cylindrical colander like cylinder.(Figure 3 on #3 and Figure 7 on #4) The device will have an area used to fit a common lanyard for individual use or used to fit into a specially designed Dual tip adapter to hold the Disposable 2(Figure 3 on #2 and Figure 8 on #4) along side a common electronic e-‐cigarette vaporizer disposable tank. (Figure 1 on #2). Final device/or product 9 (Figure 5 on #2) Final Disposable 2 (Figure 2,3 on #2 and Figure 8 on #4) * The Dual tip adaptor is designed to screw into most common disposable electronic cigarette tanks. It is designed with 2 “C” shaped couplings used to hold the Disposable 2 Re-‐Breather.(Figure 2,3 on #2 and Figure 8 on #4) They are located in the middle of the tip and are on opposite sides of each other for left and right-‐
handed users. (Figure 1 on #2) User: The user will use the Allura Vap Re-‐Breather (Disposable 2-‐ Dual tip adaptor for disposable tank) in two possible ways. 1) It will be used as disposable and non-‐
attached re-‐breather that can be hooked to a lanyard that is attached with a short string with the other end attached to the electronic cigarette. The lanyard will be small in order to keep the Disposable 2 in close proximity to the E cigarette. 2) as an accessory device attached to an electronic cigarette vaporizer with the use of the dual tip adaptor designed for most disposable E cigarette tanks. Purpose: The purpose of the Allura Vaporizer Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vape Blu Re-‐Breather (Disposable) Description: The Allura Vap Blue Re-‐Breather (Disposable) is meant be a disposable device. The device fits around most common Electronic Cigarettes.(Figure 3) The device is designed with clear plastic material used to transfer the projected LED light from the E-‐Cig to the front of the device while vapeing.(Figure 1) The chamber has venting holes and or vent(Figure 5) at the bottom to allow exhaled vape to exit the chamber into an anti-‐microbial, anti-‐
partical, anti-‐bacterial material designed to condense the vapor.(Figure 2) Then the exhaled vape will exit through the exhaust ports(Figure 4) on the side of the device leaving the air clear of any vapor. User: The user will use the Allura Vape Blu Re-‐breather (Disposable) in one possible ways. 1) as an accessory device attached to an electronic cigarette vaporizer. Purpose: The purpose of the Allura Vaporizer Blu Re-‐breather is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vape-‐ ProVari (Bottom Fit-‐Stand) Description: The Allura Vap Re-‐Breather (Bottom Fit/Stand) is meant to fit on the bottom the ProVari Electronic cigarette vaporizers. The device is made completely out of metal. The Allura Provari is designed to screw onto the bottom of the ProVari mod. This Re-‐breather acts as a stand as well. The threaded bottom is meant to screw onto a specially designed mettle cap with a re-‐breathing hole on the bottom. (Figure 3) The insert is specially designed to filter out any micro-‐particles, microbial agents, and condense exhaled electronic vaporizers vapor, into non-‐visible air.(Figure 2 and Same as Figure 6 on #5)The insert is fits inside the re-‐breathing chamber. The expelled vapor is meant to travel through the filter and out of the exhaust holes on the other side of the re-‐breathing chamber. (Figure 1)Final device (Figure 4) User: The user will use the Allura Vape ProVari Re-‐Breather (bottom fit/ Stand) in Two possible ways. 1) It will be used as fixed to a ProVari style electronic vaporizer mod as a fixed piece able to be removed at will. 2) As an electronic vaporizer Stand. Purpose: The purpose of the Allura Vaporizer Provari Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vape Re-‐Breather -‐ The Cone (Duel Drip Tip + Disposable filter) Description: The Allura Vap – The Cone (Duel Drip Tip + Disposable filter) is meant to be a drip tip device that is made from high quality plastic or metal that is in a cone shape. The Cone has two areas for drip tips. (Figure 1) The Cone is also threaded at the bottom(Figure 2) to fit a disposable filter.(Figure 3)This filter is to screw into the cone and fits around all mini and full size tanks.(Figure 4) (Most top wick, bottom wick, and customizer tanks). Other alteration of the filter can be sold for other tanks that are available. Finished Device on an E-‐cig(Figure 5) * The Cone Disposable Filter is designed to eliminate the visual electronic e-‐
cigarette vapor, microbial agents, and micro particles. This is done with a specially designed breathable paper, anti bacterial sponge material, and micro partial filter material. User: The user will use the Allura Vap Re-‐Breather (Disposable) in two possible ways. 1) It will be used as disposable and non-‐attached re-‐breather 2) as an accessory device attached to an electronic cigarette vaporizer with the use of a lanyard. Purpose: The purpose of the Allura Vaporizer Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem. Allura Vap Re-‐Breather (Disposable 3-‐ Dual Drip tip adaptor for disposable tank Vivi Nova & Mini Nova) Description: The Allura Vap Re-‐Breather (Disposable 3-‐ Dual tip adaptor for disposable tank Vivi Nova & Mini Nova) is meant be a disposable device. The disposable 3 is made out of low cost moldable plastic. The first piece is cylindrical colander like cylinder. (Figure 1 on #4) This piece is also designed with a re-‐
breathing tip much like the included tank tip adaptor. This tip, although similar, is designed to exhale through. It is filled with a micro-‐particle material to filter out micro-‐particles. (Figure 2 on #4) Then the outside is wrapped in an anti bacterial sponge like material used to condense the electronic e cigarette vapor.(Figure 3 on #4)This piece is then surrounded by another cylindrical colander like cylinder.(Figure 7 on #4) The device will have an area used to fit a common lanyard for individual use or used to fit into a specially designed Dual tip adapter(Figure 3 on #3) to hold the Disposable 3 along side a common electronic e-‐cigarette vaporizer Vivi Nova or Mini Vini Nova tanks.(Figure 5,4 on #3) * The Dual tip adaptor is designed to fit into most common electronic cigarette tanks (Vivi Nova and Mini Vivi Mini Nova)(Figure 4 on #3). It is designed with 2 “C” shaped couplings used to hold the Disposable 3 Re-‐Breather. (Figure 3 on #3)The length of the section between the tip and the “C” shaped couplings would be shorter for the mini Vivi nova and longer for the Vivi nova tank. They are located in the middle of the tip and are on opposite sides of each other for left and right-‐handed users. The Disposable 3 will fit most customizer tanks as well big tanks and small tanks. The tips would be classified as being in the same category as “Drip Tips” (Figure 1 on #3 and Figure 4 on #4) Final Disposable 3(Figure 8 on #4) Final Device and Dual tip adaptor on E-‐cig. (Figure 5 on #3) User: The user will use the Allura Vap Re-‐Breather (Disposable 3-‐ Dual tip adaptor for disposable tank Vivi Nova & Mini Nova) in two possible ways. 1) It will be used as disposable and non-‐attached re-‐breather that can be hooked to a lanyard that is attached with a short string with the other end attached to the electronic cigarette. The lanyard will be small in order to keep the Disposable 2 in close proximity to the E cigarette. 2) as an accessory device attached to an electronic cigarette vaporizer with the use of the dual tip adaptor designed for most E-‐cigarette tanks (Vivi Nova and Mini vivi Nova). Purpose: The purpose of the Allura Vaporizer Re-‐breathe is to eliminate the visual electronic e-‐cigarette vapor, microbial agents, and micro-‐particles exhaled in public. A great amount of negativity towards vaporizing in public settings such as in malls, movies, lines at the bank, and general public is not the odor or the actual act of vapeing, but the visual impact it has in public. This device will solve that problem.

Download Report