CIRRUS™ tank module TM100. VOC collection equipment.

CIRRUS™ tank module TM100.
VOC collection equipment.
CIRRUS™ tank module TM100 equipped with all available options
Convenient VOC collection
The CIRRUS™ tank module TM100 is a pre-engineered solution for safe, flexible and convenient collection
of condensed volatile organic compounds (VOCs) from a CIRRUS Vapour Emission Control (VEC) system. The
condensate discharge is controlled by a level indicator. The tank and outlet piping are traced with electrical
heating cable to prevent freezing of the condensate.
Pressure vessel approval
The CIRRUS TM100 unit complies with the national pressure vessel codes.
Materials of construction
All materials wetted by condensate are 316L stainless steel, PTFE, titanium, fluorsilicon and santoprene. The
tank module is mounted in a skid made from 304 stainless steel and is fully insulated.
Electrical safety
The CIRRUS tank module TM100 complies with NFPA codes for electrical systems for installation in classified
areas. This is achieved by using intrinsically safe signal loops, and a junction box for the power supply to the
defrost system. The instrument cabinet with operator panel shall be installed in a non-classified area.
Control system
The CIRRUS tank module TM100 utilizes the control system of the CIRRUS VEC unit, which is based on a
PLC system and operator panel.
Installation
The unit can be installed outdoors, but the control cabinet needs to be installed with weather protection and
at temperatures of 32 to 120ºF
Documentation
Each CIRRUS TM100 unit is delivered with complete documentation. This includes instructions for installation,
maintenance, safety and operation. There are also component datasheets, electrical and dimensional
drawings, and manufacturing control documentation, such as welding documents, material certificates and
test protocols.
CIRRUS™ is a trademark of The Linde Group.
2 of 2
→ CIRRUS™ tank module TM100. VOC collection equipment.
CIRRUS TM100
Process data
Volume
Nominal pump capacity1
Pressure range
Temperature range2
25 gallons
475 gallons / hour
-14.5 to +75 psig
-35 to 212°F
Dimensions
Width
Depth
Height
Weight
5.2 ft
3.9 ft
4.3 ft
660 lb
Connections
3
Condensate, inlet flange
Condensate, outlet flange
Tank breathing
2x 2”
1/2”
3/4" ISO4
Utilities
Electricity (50/60 Hz)
Compressed air
Pressure
Dew point
460 V, 20 A, 3 phase
75-100 psig
< -4°F
1
Valid at 30psig head pressure (water being pumped), with 45 psig air inlet pressure.
For system including standard pump. Without pump, temperature rating is -150 to +300°F.
Can be connected to up to 2 CIRRUS® M50/M150 units or 1 CIRRUS® M500 unit.
4
Internal threaded fitting.
2
3
Linde North America, Inc.
575 Mountain Ave., Murray Hill, NJ 07974 USA
Phone 1-800-755-9277, [email protected] www.lindeus.com
Linde North America Inc. is a member of The Linde Group. Linde is a trading name used by companies within the Linde Group.
The Linde logo is a trademark of The Linde Group. © The Linde Group 2014.
2511_0914
Technical data