CV Beck

Personal Details
Name:
Beck
First Name:
Tilmann
Title:
Prof. Dr.-Ing.
Date of Birth:
08.07.1967
Gender:
male
Work Address:
TU Kaiserslautern, Institute of
Materials Science and Engineering
Gottlieb-Daimler-Strasse, Building 44
67663 Kaiserslautern
Phone Number:
+49-(0) 631 205 3362
E-Mail-Address:
[email protected]
Position:
Full Professor (W3)
Academic Record
10/1989-04/1995:
Scientific Record
2009:
Diploma (Dipl.-Ing.) studies in Mechanical Engineering,
Universität Karlsruhe (TH), (thesis supervisor: Prof. Dr.-Ing. Dr. e.h.
Sigmar Wittig)
PhD thesis (Dr.-Ing., with distinction), Universität Karlsruhe (TH),
(supervisor: Prof. Dr.-Ing. Detlef Löhe)
Professional Record
since 03/2014:
Professor (W3) for Materials Science and Engineering, TU
Kaiserslautern
10/2011-02/2014:
Head of Department „Materials Mechanics“, FZ Jülich, IEK-2
01/2008-02/2014:
Professor (W2) for High Temperature Materials Mechanics / General
Mechanics, RWTH Aachen University
02/2007-09/2011:
Head of Department „Metallic Structural Materials“, FZ Jülich, IEF-2
04/2002-01/2007:
Akademischer Rat and Group Leader „Near Service Loadings“,
Universität Karlsruhe (TH)
05/1999-04/2002:
Research Assistant and Group Leader „Near Service Loadings“,
Universität Karlsruhe (TH)
Awards
2015
2013
2007
2006
2004
Charles-Hattchett-Award 2015
Stahl-Innovationspreis 2015: WKK together with Bremen University,
IWT, RWTH Aachen University, IEHK, and TU München, FZG
Honorary Medal of the Faculty of Metal Engineering and Industrial
Informatics, AGH University of Science and Technology, Krakow,
Poland
Buehler Best Paper Award of the Journal „Praktische Metallographie
Georg Sachs Award of the Deutsche Gesellschaft für Materialkunde
(DGM)
DGM Nachwuchspreis
Conference Chair, Editorial Boards and Reviewing Activities
since 2014
Executive Chair of the Conference Series „Low Cycle Fatigue“
since 2012
2009
2014
Head of the Working Group „Thermo Mechnaical Fatigue (TMF)“ of
Deutscher Verband für Materialforschung und -prüfung (DVM)
Executive Chair of the 9th Liège Conf. on Materials for Advanced
Power Engineering
Guest Editor – Special issue “Reactive Air Brazing” of Advenced
Materials Engineering
Reviewer for various journals including Int. Journal of Fatigue, Fatigue and Fracture of Eng.
Materials, Materials Science and Engineering A, Advanced Engineering Materials, Surface
and Coatings Technology
Selected Publications
B. Kuhn, M. Talik, L. Niewolak, J. Zurek, H. Hattendorf, P. J. Ennis, W. J. Quadakkers, T.
Beck, L. Singheiser: Development of high chromium ferritic steels strengthened by
intermetallic phases, Mater. Sci. Eng. A 594 (2014) 372-380.
S. Stille, J. Pöplau, T. Beck, M. Bambach, G. Hirt, L. Singheiser: Very high cycle fatigue
behavior of riblet structured Alclad 2024 thin sheets, Int. J. Fatigue 63 (2014) 183-190.
S. Stille, T. Beck, L. Singheiser: Influence of riblet geometry on fatigue life of surface structured AA 2024 thin sheets, Int. J. Fatigue 68 (2014) 48-55.
S. Kovacs, T. Beck, L. Singheiser: Influence of mean stresses on fatigue life and damage of a
turbine blade steel in the VHCF-regime, Int. J. Fatigue 49 (2013) 90-99.
C. Li, B. Kuhn, J. Brandenberg, T. Beck, L. Singheiser, K. Bobzin, N. Bagcivan, N. Kopp:
Improving Contour Accuracy and Strength of Reactive Air Brazed (RAB) Ceramic/Metal
Joints by Controlling Interface Microstructure, Adv. Eng. Mater. 14 (2012) 394-399.
B. Rutkowski, J. Malzbender, R. W. Steinbrech, T. Beck, H. J. M. Bouwmeester: Influence of
thermal history on the cubic-to-hexagonal phase transformation and creep behaviour of
Ba0.5Sr0.5Co0.8Fe0.2O3- ceramics, J. Membr. Sci. 381 (2011) 221-225.
M. Köhl, M. Bram, A. Moser, H. P. Buchkremer, T. Beck, D. Stöver: Characterization of
porous, net-shaped Ti- and NiTi alloys regarding their damping and energy absorbing
capacity, Mater. Sci. Eng. A 528 (2011) 2454-2462.
B. Kuhn, C. Asensio Jimenez, L. Niewolak, T. Hüttel, T. Beck, H. Hattendorf, L. Singheiser,
W. J. Quadakkers: Effect of Laves phase strengthening on the mechanical properties of high
Cr ferritic steels for solid oxide fuel cell interconnect application, Mater. Sci. Eng. A 528
(2011) 5888-5899.
O. Trunova, T. Beck, R. Herzog, R. W. Steinbrech, L. Singheiser: Damage Evolution and
Lifetime Prediction of Plasma Sprayed Thermal Barrier Coatings for Gas Turbines - Part I:
Experiments, Surf. Coat. Technol. 202 (2008) 5027-5032.
T. Beck, R. Herzog, O. Trunova, M. Offermann, R. W. Steinbrech, L. Singheiser: Damage
Mechanisms and Lifetime of Plasma Sprayed Thermal Barrier Coating Systems for Gas
Turbines - Part II: Simulation, Surf. Coat. Technol. 202 (2008) 5901-5908.

Download Report