Order Code: PR5IP010-010-040

Universal Assembly Press
Precision Line 1-100-400
MAIN FUNCTIONS
Nominal load (push / pull)
Stroke
Nominal speed
Acceleration
Dwell time of nominal load
Weight mechanics (NG1/HG1)
Max. tool weight *
Force
Measuring principle
System accuracy **
Amplifier PDM-S / (WxHxD)
Output signal
Protection class
Power supply
DISTANCE MEASURING
1 / 1 kN
100 mm
400 mm/s
5000 mm/s2
Min. 4 s
9,94 / 10,1 kg
1 kg
Piezo
<1% with 2-point-calibration / <0,3% with characteristic map
Aluminum die-cast (125x80x57mm)
digital
IP 40
19 - 36 VDC, (3W)
Encoder systeme
Repeatability of positioning ***
SERVO AMPLIFIER
Type
Dimensions (WxHxD)
Mains voltage
Cable cross section input
Cable cross section output
Protection class
Weight
Recommended protection
Temperature range
Power loss
MAINS FILTER
Multiturn
< 0,01 mm
Weight
Cable cross section input (max.)
Power loss
Dimensions (WxHxD)
Protection class
PC INTERFACE
SPS SCHNITTSTELLE (24 VDC)
EXTENSION OPTIONS
PROMESS-BUS
2 kg
1,5 mm² / 18 AWG
13 W
83 x 426 x 41mm
IP20
Ethernet
3I / 4O
PLC FIELDBUS INTERFACE
Profibus, Profinet, EtherCat, EtherNet/IP, Modbus/TCP
M702-034 00025 A
83x382x200 mm
3 AC 380 V … 480 V, +/-10 %
IEC 1,5 mm² / UL 18 AWG
IEC 1,5 mm² / UL 18 AWG
IP20
4 kg
IEC 10 A gG / UL/USA 10 A CC or J
-20°C…+50°C
94W
PDM-A: 4x Analogue | PDM-P: Piezo | PDM-I/O: 16I / 16O
* if using a holding break: max. permitted tool weight = 10% nominal load. For a heavier tool weight please consult PROMESS
** Force measuring system, static calibration / *** at thermal steady-state
Order Code:
PR5IP010-010-040 _ _ _
Motor position:
I:Inline / P: Parallel
Mearuring principle:
D:Strain gauge / P: Piezo
Nominal force in 1/10KN
e.g. 10KN: 100
Nominal stroke in cm
Nominal speed in cm/s
Brake:
H: Holding brake
S: Safety brake
N: without brake
Special type:
G1: Basic version
XX: Special type
PROMESS Gesellschaft für Montage- und Prüfsysteme mbH
Nunsdorfer Ring 29
Fax: +49/30/62 88 72 59
D - 12277 Berlin
e-mail: [email protected]
Tel.: +49/30/62 88 72 0
web: www.promessmontage.de
All specifications in the data sheets are valid at the print date.
Before basing your own calculations/usage on the listed information,
please inform yourself whether the information at your disposal is upto-date. We do not accept any liability for correctness of the
information. Jun-16
PROMESS Gesellschaft für Montage- und Prüfsysteme mbH
Nunsdorfer Ring 29
Fax: +49/30/62 88 72 59
D - 12277 Berlin
e-mail: [email protected]
Tel.: +49/30/62 88 72 0
web: www.promessmontage.de
All specifications in the data sheets are valid at the print date.
Before basing your own calculations/usage on the listed information,
please inform yourself whether the information at your disposal is upto-date. We do not accept any liability for correctness of the
information. Jun-16

Download Report