Determination of the maximum load Force-Strain Curve

BFSV Verpackungsinstitut
Hamburg GmbH
Determination of the maximum load
The Air flight case side panel was clamped in a holding device.
Tensile load of the handles and riveting to destruction.
Result: The riveting and handles are still strong enough but the holding device
has been destroyed.
full view
Maximum
Tensile load
Handle till destruction
(deformation
of handles)
Handles at the start
Handles at the end
Force-Strain Curve
15000
A
(1557 kg)
Zugkraft in N
15275 N
10000
5000
0
0
50
100
Dehnung in mm
150
BFSV Verpackungsinstitut
Hamburg GmbH
Continuous test with 500 cycles (tipping)
Simulating the „tipping“ with 500 cycles and a tensile load of 400kg
and release to 50kg.
Result: After 500 cycles the riveting and handles as well as the material remain stable.
Only bending of the handle anchoring and a deviating angle of the
handle position by 15°
Handle position before / angle: 93 °
Handle position after 500 cycles by 500 N to 4000 N
(50 Kg to 400 kg) / angle: 108 °
Force-Strain Curve
4000
full view
A
continuous loading
500 cycles
500 N - 4000 N
Zugkraft in N
Handle
3000
2000
1000
0
0
20
40
Dehnung in mm
60
80
BFSV Verpackungsinstitut
Hamburg GmbH
Continuous test with 1000 cycles (tipping)
Simulating the „tipping“ with 1000 cycles and a tensile load of 200kg
and release to 50kg.
Result: After 1000 cycles the riveting and handles as well as the material remain stable.
Only moderate bending of the handle anchoring and a deviating angle of the
handle position by 2°
Handle position before / angle: 93 °
Handle position after 1000 cycles by 500 N to 2000 N
(50 Kg to 200 kg) / angle: 95 °
Force-Strain Curve
4000
Handle
A
continuous loading
1000 Zyklen
500 N - 2000 N
3000
Zugkraft in N
full view
2000
1000
0
0
20
40
Dehnung in mm
60
80
BFSV Verpackungsinstitut
Hamburg GmbH
Griffstellung vor der Belastung / Winkel: 93 °
Griffstellung nach 1000 Zyklen von 500 N bis 2000 N
(50 kg bis 200 kg) / Winkel: 95 °
Gesamtansicht
GriffAusführung
Griffstellung nach 500 Zyklen von 500 N bis 4000 N
(50 Kg bis 400 kg) / Winkel: 108 °
Zyklische
Dauerbelastung
Kraft-Dehnung-Kurven
4000
1000 Zyklen
500 N - 2000 N
3000
Zugkraft in N
A
A
500 Zyklen
500 N - 4000 N
2000
1000
0
0
20
40
Dehnung in mm
60
80

Download Report