INSTALLATION INSTRUCTION PLUG P3SC Straight connector 1- core PLUG P3CS Connector socket 1- core PLUG P3SC / P3CS Description of symbols Caution! Observe the notes in the picture. Use a suitable compression tool! Carry out visual control. Check the confirmity of the parts and the cross-section! Installation requires higher force Installation requires little force Dispose of the part in an environmentally responisble way. Indicator arrow Arrow for straight-line movements Arrow for turning movements Drawings are not o scale 2 31 www.pfisterer.com Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS Preface These installation instruction describes the assembly of a PLUG P3SC straight connector with item number 305 990 001 VAR xxxx, 305 015 VAR xxxx, 305 990 008 VAR xxxx and a PLUG connector socket with item number 305 014 VAR xxxx and 305 990 009 VAR xxxx. PLUG-connection systems enable the secure transmission of high electrical power in the smallest construction volume. Mandatory notes to be observed: The internal installation regulations from the network operator must be observed! The installation must only be performed by trained, qualified electricians. Installation under energized line is not permitted! Connecting under energized line is not permitted! These installation instructions must be read carefully before installing. Keep the straight connector and connector socket clean and dry. Straight connector and connector socket only plug in under dry conditions. The items must each be taken frome one packaging unit. Check parts for completeness and damage. In case of incompleteneness or damage the system must not be installed! Process the installtion clean, dry and run with care. Dirty or dropped parts must not be used! Exchange of the straight connector / connector socket is necessary! Use only listed and approved tools (see page 4). Straight connector are provided with a mechanical polarization (marked with AF01 - AF06, depending on the version) which must be fit into the corresponding straight connector / connector socket. The area of use must be released by the manufacturer prior to installation. PFISTERER Kontaktsysteme GmbH has no liability in the case of improper use or noncompliance with the applicable safety regulations, of for any consequential damage resulting from these. We do not asume any liability for printing errors. Subject for technical modifications. Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 303 PLUG P3SC / P3CS Product description Compact straight connector and connector socket for connection to motors, transformers, converters, emergency power supply, air-conditioning technology, etc. Straight connector and connector socket are polarized so that an interchange of the connections is reliable prevented in screwed position. Note that the polarization does not interlock at the beginning of the mating prozess. Cable termination: pressed. The permitted cable cross-sections with DIN EN 60228 are given in the table. conductor-cable RM round stranded class 2 flex class 5 cross-section P3SC cross-section P3CS Cu 95 - 300 mm² 95 - 300 mm² Cu 70 - 240 mm² 70 - 240 mm² Mechanical coding Possible codings PLUG P3SC PLUG P3CS AF01 - AF06 AF01 - AF03 Straight connector and connector socket are provided with a mechanical coding (marked wit AF01 - AF06, depending on the version) which must be assigned to the corresponding straight connector / to connector socket. Check coding before installation Drawings are not o scale 4 29 www.pfisterer.com Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS Presses and dies for the PLUG-assembly The tools listed below may only be used for the PLUG-assembly. Tool name item number cross-section Hand operated compression tool type O6 303 871 002 6 - 185 Hexagonal compression die Overview hexagonal compression dies 300 438 xxx 25 - 185 conductor cross-sectiont item number die number 300 438 445 300 438 447 12 14 300 438 448 300 438 451 16 20 35/50/70 95 300 438 454 300 438 452 300 438 453 21 22 25 120 P1 P2 25/35 50 25 P3 35 70/95 120 150/185 Optional: Hydraulic manual compression tool EPC 410 305 919 001 10 - 300 Hydraulic cordless compression tool REC-100 305 914 001 10 - 300 Hydraulic cordless compression tool RC-12 305 926 001 10 - 300 die, type C Overview dies, type C 300 513 xxx 25 - 240 conductor cross-section item number die number 300 513 008 300 513 010 12 14 300 513 011 300 513 013 16 20 35/50/70 95 300 513 019 300 513 014 21 22 120 300 513 015 300 513 016 25 28 P1 P2 25/35 50 25 P3 35 70/95 120 150/185 240 It is necessary to use the correct compression tool corresponding to the cross-section. In this case please ask yout technical contact person. Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 285 PLUG P3SC / P3CS Scope of delivery PLUG P3SC Position Description Quantity 1 Connector casing 1 Stk. 2 Strain relief 1 Stk. 3 Contact element 1 Stk. 4 Sealing 1 Stk. 5 Pressure disk 1 Stk. 6 Clamping nut 1 Stk. 7 Assembly instruction printed 1 Stk. Caution! Installation is not permitted, if any parts of the PLUG straight connector is incomplete, damaged, contaminated or corroded! The items must each be taken from one packaging unit. Drawings are not o scale 6 27 www.pfisterer.com Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS Scope of delivery PLUG P3CS Position Description Quantity 1 Socket casing 1 Stk. 2 Strain relief 1 Stk. 3 Contact element 1 Stk. 4 Sealing 1 Stk. 5 Pressure disk 1 Stk. 6 Clamping nut 1 Stk. 7 Assembly instruction printed 1 Stk. Caution! Installation is not permitted, if any parts of the PLUG connector socket is incomplete, damaged, contaminated or corroded! The items must each be taken from one packaging unit. Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 267 PLUG P3SC / P3CS Pressing code number P3SC / P3CS b Conductor cross-section rm a Pressing code number flex xx mm2 70 mm 2 21 120 mm2 95 mm2 21 mm2 mm2 22 185 mm2 150 mm2 25 240 mm2 185 mm2 25 mm2 mm2 28 95 150 300 120 240 Attention! Depending on the cable, other cross sectional ranges can apply. In case of doubt: Design with the assistance of our technical consulting as well as subsequent trial assembly. xx.x d (mm) = d1+d2+d3 16,0 16,5 - 18,4 18,0 18,5 - 20,4 20,0 20,5 - 22,0 22,0 22,5 - 24,4 24,0 24,5 - 26,4 26,0 26,5 - 28,4 Drawings are not o scale 8 25 www.pfisterer.com 3 Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS 1 2 3 4 Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 249 PLUG P3SC / P3CS 5b 5a P3SC 6 P3CS P3SC / P3CS 2x14mm / 4x5mm 7a P3SC Drawings are not o scale 10 23 www.pfisterer.com 7b P3CS Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS 8a P3SC 8b P3CS 9 10 11 Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 11 22 PLUG P3SC / P3CS 12a P3SC 12b P3CS 13 P3CS 14a P3CS Drawings are not o scale 12 21 www.pfisterer.com 14b Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS 15a Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 13 20 1 PLUG P3SC / P3CS 15b P3SC 15c P3SC / P3CS Drawings are not o scale 14 19 www.pfisterer.com Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) PLUG P3SC / P3CS 16 Drawings are not o scale Size 2-3/standard instruction PLUG/Nr. 040 255 040 (02-2015) www.pfisterer.com 15 18 PFISTERER worldwide PFISTERER Kontaktsysteme GmbH Werk Gussenstadt Bahnhofstraße 30 89547 Gerstetten-Gussenstadt Deutschland Telefon +49 (0) 7323 83 0 Telefax +49 (0) 7323 83 603 Firmenzentrale Rosenstraße 44 73650 Winterbach Deutschland Telefon +49 (0) 7181 7005 0 Telefax +49 (0) 7181 565 E-Mail [email protected] Internet www.pfisterer.de PFISTERER S.A. Av. Velez Sarsfield 464 C1282AFR Buenos Aires Argentinien Telefon +54 11 4306 3595 Telefax +54 11 4362 2381 E-Mail [email protected] PFISTERER Power Connection Systems (Beijing) Co., Ltd. Unit 518, Landmark Tower 2 8 North Dongsanhuan Road Chaoyang District 100004 Beijing China Telefon +86 10 6590 6272-0 Telefax +86 10 6590 6105 E-Mail [email protected] PFISTERER SAS 35 avenue d’Italie, 68110 Illzach BP 10045 68110 Illzach Cédex Frankreich Telefon +33 389 319029 Telefax +33 389 319028 E-Mail [email protected] PFISTERER Ltd. Unit 9, Ellesmere Business Park Off Swingbridge Road Grantham NG31 7XT, Lincolnshire Großbritannien Telefon +44 1476 578657 Telefax +44 1476 568631 E-Mail [email protected] PFISTERER s.r.l. Via Sirtori 45 d 20017 Passirana di Rho (Milano) Italien Telefon +39 02 9315811 Telefax +39 02 93158137 E-Mail [email protected] PFISTERER Korea Branch Room 1930 Kwanghwamun Official Building 163 Shinmunro-1ga, Jongno-Gu Seoul 110-999 Korea Telefon +82 232762630 Telefax +82 232762631 E-Mail [email protected] PFISTERER Ges.m.b.H. Augasse 17 1090 Wien Österreich Telefon +43 1 3176531 0 Telefax +43 1 3176531 12 E-Mail [email protected] PFISTERER Sp.z o.o ul. Pogodna 10 05-850 Piotrkowek Maly Polen Telefon +48 22 72241 68 Telefax +43 22 72127 81 E-Mail [email protected] PFISTERER Russia Verkaufsbüro Krasnopresnenskaya nab., 12 Entrance No. 6, offic no. 921 123610 Moskau Russland Telefon +7 495 258 1350 E-Mail [email protected] PFISTERER SEFAG AG Werkstraße 7 6102 Malters, Luzern Schweiz Telefon +41 41 499 72 72 Telefax +41 41 499 72 69 E-Mail [email protected] PFISTERER INTERNATIONAL AG Werkstraße 7 6102 Malters, Luzern Schweiz Telefon +41 41 499 72 74 Telefax +41 41 499 72 26 E-Mail [email protected] PFISTERER Komponent & System AB Flygfältsgatan 2 128 30 Skarpnäk Schweden Telefon +46 8 7240 150 Telefax +46 8 6054 750 E-Mail [email protected] PFISTERER UPRESA S.A.U Calle Industria 90-92 08025 Barcelona Spanien Telefon +34 93 4367409 Telefax +34 93 4367701 E-Mail pfisterer.upresa@ pfistererupresa.eu PFISTERER (Pty.) Ltd. 9 Willowton Road Pietermaritzburg 3201 Südafrika Telefon +27 33 397 5400 Telefax +27 33 397 6377 E-Mail [email protected] PFISTERER Czech Republic Verkaufsbüro Budova Mediahall Bidlaky 20 639 00 Brno Tschechische Republik Telefon +420 533 337 190 Telefax +420 533 337 191 E-Mail [email protected] PFISTERER Hungary Verkaufsbüro Bég u. 3-5 1022 Budapest Ungarn Telefon +36 1 251 3441 Telefax +36 1 251 1713 E-Mail [email protected] PFISTERER USA Verkaufsbüro 7625 Wisconsin Avenue, Suite 306 Bethesda, MD. 20814 Maryland USA Telefon +1 240 482 4955 Telefax +1 240 482 3599 E-Mail [email protected] PFISTERER Dubai Branch Gate 7, 3rd Floor, Hamarain Center P.O. Box 184090, Dubai Vereinigte Arabische Emirate Telefon +971 4 2690147 Telefax +971 4 2690148 E-Mail [email protected]
© Copyright 2025 ExpyDoc
