TYPE CS - TROX UK Ltd

Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type CS
TYPE CS
FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, ALUMINIUM
CONSTRUCTION
Circular silencers, in rigid aluminium construction, for the reduction of noise in the circular ducts of air
conditioning systems
Absorption material is non-combustible mineral wool with RAL quality mark, biosoluble and hence
hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and
EU directive 97/69/EC
Casing and perforated inner duct made of aluminium
Variant with spigot has a groove for a lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180
Insertion loss measured according to ISO 7235
Casing air leakage to EN 15727, class D
Optional equipment and accessories
Socket-type spigots on both ends
Raised edges at both ends
With lip seals on both ends
Circular silencer Type CS
Circular silencer Type CS
Application
Circular silencers Type CS for the reduction of air-regenerated noise in the circular ducts of air
conditioning systems
For the reduction of air-regenerated noise of air terminal units LVC and TVR, and of mechanical selfpowered controllers RN and VFC
For the reduction of fan noise
Can be used as cross talk silencer to reduce the transfer of noise through ducts between
neighbouring rooms
Special features
Insertion loss measured according to ISO 7235
Absorption material is non-combustible
Absorption material is non-combustible
Insulation thickness 25 mm or 50 mm
Variants
025: Circular silencer with 25 mm insulation
050: Circular silencer with 50 mm insulation
AS2: Circular silencer with socket-type spigots on both ends
BK2: Circular silencer with raised edges at both ends
Special versions upon request
Parts and characteristics
Casing
Perforated inner tube
Absorption material
Accessories
VD2: Lip seals on both ends (factory fitted)
AS2: Socket-type spigots on both ends
BK2: Raised edges at ends
Konstruktionsmerkmale
Rundes Gehäuse
Rohrstutzen passend für runde Luftleitungen nach EN 1506 oder EN 13180
Rohrstutzen mit Einlegesicke für Lippendichtung
Maximaler Betriebsdruck 1000 Pa
Maximale Betriebstemperatur 100 °C
Materialien und Oberflächen
Materialien und Oberflächen
Mantel und gelochtes Innenrohr aus Aluminium
Auskleidung aus Mineralwolle
Endkappen aus Kunststoff ABS, Brennbarkeit nach UL 94, V-0 (Nenngrößen 80 – 125)
Endkappen aus Aluminium (Nenngrößen 160 – 400)
Mineralwolle
Nach EN 13501, Baustoffklasse A1, nicht brennbar
RAL-Gütezeichen RAL-GZ 388
Hygienisch unbedenklich durch hohe Biolöslichkeit, nach TRGS 905 sowie EU-Richtlinie 97/69/EG
Inert gegenüber Pilz- und Bakterienwachstum
TECHNICAL INFORMATION
Nenngrößen
80 – 400 mm
Betriebsdruck
Maximal 1000 Pa
Betriebstemperatur Maximal 100 °C
Circular silencers for air conditioning systems, rigid construction, available in 8 nominal sizes.
Insertion loss measured according to ISO 7235.
Casing with acoustic and thermal insulation.
Spigot with groove for lip seal, suitable for circular connecting ducts to EN 1506 or EN 13180.
Casing air leakage to EN 15727, class D.
Special features
Insertion loss measured according to ISO 7235
Absorption material is non-combustible
Insulation thickness 25 mm or 50 mm
Materialien und Oberflächen
Mantel und gelochtes Innenrohr aus Aluminium
Auskleidung aus Mineralwolle
Endkappen aus Kunststoff ABS, Brennbarkeit nach UL 94, V-0 (Nenngrößen 80 – 125)
Endkappen aus Aluminium (Nenngrößen 160 – 400)
Mineralwolle
Nach EN 13501, Baustoffklasse A1, nicht brennbar
RAL-Gütezeichen RAL-GZ 388
Hygienisch unbedenklich durch hohe Biolöslichkeit, nach TRGS 905 sowie EURichtlinie 97/69/EG
Inert gegenüber Pilz- und Bakterienwachstum
Technische Daten
Nenngrößen: 80 – 400 mm
Betriebsdruck: Maximal 1000 Pa
Betriebstemperatur: Maximal 100 °C
Betriebstemperatur: Maximal 100 °C
Type
CS
Nominal size [mm]
Circular silencer
80
Insulation thickness [mm]
100
125
025
25
050
50
160
200
250
315
400
Nominal length [mm]
500
1000
1500
Type of connection
VD2
AS2
No entry: spigot
Spigot with lip seal on both ends
Socket-type spigots on both ends
BK2
Raised edges at both ends
Home Contacts Imprint Delivery and payment terms Privacy Disclaimer
2016-03-02 © TROX UK
Ltd.
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type CS
DOWNLOADS
Print page Type CS
Link
Control Units
12 MB PDF
K5
Cataloge
Type CS K5 – 1.2 – 9
430 KB PDF
Technical Leaflet
TROX SERVICES
PRODUCTSEARCH A-Z
TROX EASY PRODUCT
FINDER
TOUR DE
COMPETENCE
Home Contacts Imprint Delivery and payment terms Privacy Disclaimer
2016-03-02 © TROX UK
Ltd.
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type CS
TROX UK Ltd
Online-Services
Service-Hotlines
TROX Academy
Sales:
+44 (0)1842 754545
Contact
Service:
+44 (0)1842 754545
Contact
Your contact partner
Our Office London
Our Office Manchester
Caxton Way,
Thetford, Norfolk, IP24 3SQ,
UK
Tel: +44 (0) 1842 754545
Fax: +44 (0) 1842 763051
Our Office Thetford
Technical service
+44 (0)1842 754545
Contact
General Enquiries –
[email protected]
Sales & Customer Services –
[email protected]
Accounts –
[email protected]
Home Contacts Imprint Delivery and payment terms Privacy Disclaimer
2016-03-02 © TROX UK
Ltd.

Download Report