Setting iPhone １．Set up SIM card Insert paperclip’s tip into the small hole on the side of the phone and press, SIM tray will pop out. Take SIM card from SIM package Put in the Sim card into the tray, then put SIM tray back into your iPhone ２．Setup on PC Download 「iPhone 構成ユーリティー」from http://sunrise-net.co.jp/index.html on PC. ３．Open「iPhone 構成ユーリティー」 Select“構成プロファイル” 名前：Sun-net 識別子：（In case of LTE phone）lte.mobac.net （In case of 3G phone）3g.mobac.net Select“APN” アクセスポイント名：（In case of LTE phone）lte.mobac.net （In case of 3G phone）3g.mobac.net アクセスポイント・ユーザー名: SIM card number + @sunrise-net.co.jp For example in the image below, it’s : [email protected] アクセスポイント・パスワード: s + last 4 numbers of SIM card serial For example in the image below, it’s : s2790 Please don’ t fill in「プロキシサーバー」 and 「ポート」 sections. ４．Please connect your iPhone Install「Sun-Net」profile in 「構成プロファイル」 tab. ５．Select “Install” in iPhone display. ６．Test connection Turn off Wi-Fi and try to use Safari. If it run normally, that means setttings is OK. If it’s not, please check if there is any mistake of Access Point, Access Point – Username, Access Point – Passwrod.
© Copyright 2024 ExpyDoc
