Aluminium AlSi10Mg Applications : • Prototype cas-ngs. • Lightweight enclosures. Chemical composi-on : Si (9.0 – 11.0 wt-‐%) Fe ( 0.55 wt-‐%) Cu ( 0.05 wt-‐%) Mn ( 0.45 wt-‐%) Mg (0.2 – 0.45 wt-‐%) Ni ( 0.05 wt-‐%) Zn (0.10 wt-‐%) Pb ( 0.05 wt-‐%) Sn ( 0.05 wt-‐%) Ti ( 0.15 wt-‐%) Heat Treatment Options : •Stress relieve: anneal for 2 hours at 300°C Mechanical properties 0.02% Yield(MPa) Ul-mate Tensile(MPa) Elonga-on(%) Hardness (HBW) ISO 6892 1: 2009 B 230 405 3,5 115 DMLS -‐ SLM DMLS -‐ SLM (As Built) (Heat Trated) 240 225 415 325 4 7 120 Protoservice srl – Strada Prinzera 17 Fornovo di Taro Cap 43045 Parma – tel. 0425 401281 – fax 0425 496949 email [email protected] - www.protoservice.it
© Copyright 2024 ExpyDoc