Wagner is a 2 x 50W @8ohm class D amplifier with

Wagner
•
•
•
is a 2 x 50W @8ohm class D amplifier with power supply included:
Class-D and switching power Design for high efficiency, high stability & lighter weight.
Output power : 50W x 2CH (8ohm)
Easy for application
Application:
•
•
•
•
•
Active speakers
Musical instruments amplifiers
Combo Amplifier
Powered professional speakers
Monitor speaker
Specification:
•
•
•
•
•
•
•
Universal AC Input voltage: 90V ~ 260V
Short circuit protection
Over-current protection
Thermal protection
RoHS compliant
Bridge configuation is NOT available
Jumper for half input sensitivity for each channel for 2 ways purpose
Technical Specification:
•
•
•
•
•
•
•
•
•
Output power ref. to1%.....………………………………………………………………………... 50W / 8ohm x2CH
S/N Ratio @ rated power …………………………………………………………………… > 100 dB/ A-Weighted
THD @ -3dB rated power …..………………………………………………………………………..…...……... < 0.1%
Input sensitivity with jumper …………..…………………….……………………..……………………... 0.6 Volt
Input sensitivity without jumper ………..…………………………………………..……………………... 1.2 Volt
Input Impedance ……………………..………………………………...………………………………………………..... 22KΩ
Frequency response 20Hz ~ 20K Hz ……………………...…………………………………………….. +/- 1.5dB
Crosstalk @1KHz.........................................................................................................80dB
Dimension: 105(L) x 85(W) x 41(H) mm
Frequency Response
THD+N
FFT
CrossTalk
IMD
Input Sensitivity
Connection Scheme
PIN N°
1
2
3
4
5
6
I/O
I
I
O
O
7
I
JP2 & JP3
-
Description
B channel analog audio input
Ground
A channel analog audio input
Not connected
Aux power supply : +12V ,1A max
AMP turn on status +12VC :This pin will be high(+12V) if pin 7 is connect to logic high
(>+5V)
AMP turn on control : connect to logic high to turn on the amp module , connect logic
low will let amp module enter standby mode.
INPUT SENSIVITY Adjustment jumper: open sensitivity = 1.2Vrms
short sensitivity = 0.6Vrms
Wiring Kit
Wagner amplifier is provided with cables kit.
Cables kit includes:
•
•
•
2 cables for speaker connection
1 cable for power supply (220V or 110V)
1 cable for stereo input

Download Report