Programme 15.09.2014 - Gruppo Italiano Frattura

The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
Programme
15.09.2014
09.00 – 10.30
10.30 – 12.30
12.30 – 14.00
14.00 – 16.00
16.00 – 16.30
16.30 – 18.30
18.30 – 19.30
Registration
Session 1: Chairman Francesco Iacoviello
LUNCH BREAK
Session 2: Chairman Donato Firrao
COFFEE BREAK
Session 3: Chairman Manuel de Freitas
How to prepare a manuscript and get published on an
international academic journal. Laney Zhou (Elsevier)
16.09.2014
08.30 – 08.50
08.40 – 08.45
08.45 – 09.45
09.45 – 10.10
10.10 – 13.00
13.00 – 14.15
14.15 – 16.00
16.00 – 16.30
16.30 – 18.30
18.45 – 20.00
20.30
Registration
Workshop opening
Session 4: Chairman Francesco Iacoviello
COFFEE BREAK
Special Session: Chairman Luca Susmel
LUNCH BREAK
Session 5: Chairman Antonio Martín-Meizoso
COFFEE BREAK
Session 6: Chairman Paulo de Castro
IGF MEMBERS MEETING
WORKSHOP DINNER
17.09.2014
08.45 – 11.00
11.00 – 11.30
11.30 – 13.45
13.45 – 13.50
Session 7: Chairman Jesús Toribio
COFFEE BREAK
Session 8: Chairman Giuseppe Ferro
Workshop closing
1
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
15.09.2014
10.30 – 10.45
10.45 – 11.00
11.00 – 11.15
11.15 – 11.30
11.30 – 11.45
11.45 – 12.00
12.00 – 12.15
12.15 – 12.30
2
SESSION 1. CHAIRMAN FRANCESCO IACOVIELLO
A. Martín-Meizoso, J. Aldazabal, J.L. Pedrejón, S.
Moreno: Resilience and ductility of oxy-fuel HAZ cut
R. Louks, H. Askes, L. Susmel: Static assessment of
ductile/brittle notched materials: an engineering approach based
on the Theory of Critical Distances
G. Bolzon, G. Gabetta, B. Molinas: An investigation on
corrosion protection layers in pipelines for hydrocarbon
transportation
P. Russo Spena, P Matteis, D. Firrao, L. Cortese:
Dissimilar laser beam welding of high-Mn automotive steel
sheets
J. Toribio, M. Lorenzo, D. Vergara, V. Kharin:
Numerical analysis of hydrogen-assisted rolling-contact fatigue
of wind turbine bearings
F. Felli, A. Brotzu, D. Pilone, C. Vendittozzi, M.
Caponero: Use of FBG sensors for monitoring cracks of the
equestrian statue of Bartolomeo Colleoni in Venice
L. Náhlík, P. Hutař, K. Štegnerová: Critical applied
stresses for a crack initiationfrom a sharp V-notch
F. Burgio, L. Pilloni, M. Scafè, P. Fabbri, A. Brentari,
A. Brillante, T. Salzillo: Cf/C composites: correlation
between CVI process parameters and Pyrolytic Carbon
microstructure
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
15.09.2014
14.00 – 14.15
14.15 – 14.30
14.30 – 14.45
14.45 – 15.00
15.00 – 15.15
15.15 – 15.30
15.30 – 15.45
15.45 – 16.00
SESSION 2. CHAIRMAN DONATO FIRRAO
G. A. Ferro, S. Ahmad, R. A. Khushnood, J. M.
Tulliani, L. Restuccia: Improvements in self-consolidating
cementitious composites by using micro carbonized aggregates
S. Baragetti, F. Villa: SCC and corrosion fatigue
characterization of a Ti-6Al-4V alloy in a corrosive
environment – experiments and numerical models
B. Tyson, P. Ding, X. Wang: Elastic compliance of singleedge-notched tension SE(T) (or SENT) specimens
T. Voiconi, R. Negru, E. Linul, L. Marsavina: Notch
effect on mixed mode fracture of cellular materials
V. Di Cocco, F. Iacoviello, A. Rossi, M. Cavallini:
Damaging micromechanisms characterization in a ferriticpearlitic ductile cast iron
J. Vázquez, C. Navarro, J. Domínguez: Effect of the
model’s geometry in fretting fatigue life prediction
R. Batista, R. Claudio, L. Reis, J. Aguilar Madeira, M.
de Freitas: Design optimization of cruciform specimens for
multixial fatigue loading
G. Pitarresi, A. Toscano, M. Scafidi, M. Di Filippo, S.
Alessi, G. Spadaro: Photoelastic stress analysis assisted
evaluation of fracture toughness in hydrothermally aged epoxies
3
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
15.09.2014
16.30 – 16.45
16.45 – 17.00
17.00 – 17.15
17.15 – 17.30
17.30 – 17.45
17.45 – 18.00
18.00 – 18.15
18.15 – 18.30
4
SESSION 3. CHAIRMAN MANUEL DE FREITAS
P. Matteis, D. Firrao, G. Scavino, G. Primerano, G.
Chiandussi, D.S. Paolino, M. Rossetto, A. Tridello:
Gigacycle fatigue of H13 tool steels with different inclusion
contents
G. Catalanotti, P. Camanho, M. Vogler: A smeared crack
model with uncoupled plasticity for composites laminates
A. Spagnoli, M. Migliazza, M. Zucali, A.M. Ferrero:
Thermal degradation in Carrara marbles as the cause of
deformation of cladding slabs
C. Madrigal, V. Chaves,
A. Navarro: Numerical
implementation of a multiaxial cyclic plasticity model for the Local
Strain Method in low cycle fatigue
A. Chmel, I Shcherbakov: Damage initiation in brittle and
ductile materials as revealed by a fractoluminescence study
C. Maletta, L. Bruno, E. Sgambitterra: Stress induced
martensite at the crack tip in NiTi alloys during fatigue loading
S. Seitl: Wedge splitting test method: Quantification of influence
of marble tool bar by two-parameter fracture mechanics
J. Toribio, J.C. Matos, B. González, J. Escuadra:
Evolution of crack paths and compliance in round bars under
cyclic tension and bending
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
16.09.2014
08.45 – 09.15
09.15 – 09.45
SESSION 4. CHAIRMAN FRANCESCO IACOVIELLO
Invited Lecture. D. Taylor: Fracture mechanics: inspirations
from nature
Invited Lecture. E. T. Bowman: Friction, fragmentation and
flow - mechanics of rock bursts, falls and avalanches
5
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
16.09.2014
SPECIAL SESSION. CELEBRATING PROF. BRUNO
ATZORI: CHAIRMAN LUCA SUSMEL
10.10 – 10.15
10.15 – 10.30
10.30 – 10.45
10.45 – 11.00
11.00 – 11.15
11.15 – 11.30
11.30 – 11.45
11.45 – 12.00
12.00 – 12.15
12.15 – 12.30
12.30 – 12.45
12.45 – 13.00
6
Luca Susmel: Introduction
G. Meneghetti, M. Ricotta, B. Atzori: The specific heat loss
combined with the thermoelastic effect for an experimental analysis
of the mean stress influence on axial fatigue of stainless steel plain
specimens
A. Risitano, G. Fargione, E. Guglielmino: Determination
of the linearity end for surface temperature curve in traction static
tests
C. Barile, C. Casavola, G. Pappalettera, C. Pappalettere:
Considerations on the choice of experimental parameters in
residual stress measurements by hole-drilling and ESPI
M. Quaresimin, M. Zappalorto: Multiscale modelling and
investigations of advanced polymer nanocomposites
T. Yin, A. Tyas, O. Plekhov, L. Susmel: On the use of the
Theory of Critical Distances to estimate the dynamic strength of
notched 6063-T5 aluminium alloy
N. Petrone, M. Saraceni: Field Load acquisition and variable
amplitude fatigue testing on maxi-scooter motorcycles
P. Carraro. M. Quaresimin: A damage-based approach
to the fatigue of composites
E. Maggiolini, P. Livieri, R. Tovo: On the notch sensitivity of
cast iron under multi-axial fatigue loading
V. Crupi, G. Epasto, E. Guglielmino, G. Risitano:
Investigation of very high cycle fatigue by thermographyc method
G. La Rosa, C. Clienti, A. Marino Cugno Garrano: Lowcycle fatigue hysteresis by thermographic and digital image
correlation methodologies
C. Putignano, L. Afferrante,G. Carbone, G. Demelio:
Double Peeling of Elastic Pre-tensioned Tapes
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
16.09.2014
14.15 – 14.30
14.30 – 14.45
14.45 – 15.00
15.00 – 15.15
15.15 – 15.30
15.30 – 15.45
15.45 – 16.00
SESSION 5. CHAIRMAN ANTONIO MARTÍN-MEIZOSO
P. M. S. T. de Castro, D. F. C. Peixoto: Remarks on fatigue
crack propagation in steels, emphasizing threshold behaviour
P. Lopez-Crespo, B. Moreno, A. Garcia-Gonzalez, J.
Zapatero, A. Lopez-Moreno: Study of short cracks under
biaxial fatigue
D. Gentile, I. Persechino, N. Bonora, G. Iannitti, A.
Carlucci: Use of Circumferentially Cracked Bar sample for
CTOD fracture toughness determination in the upper shelf regime.
V. Veselý, P. Konečný, P. Lehner, D. Pieszka: Electrical
resistivity and ultrasonic measurements during sequential fracture
test of cementitious composite
G. Belingardi, F. Curà, V. Cuffaro. Dynamic additional
loads influencing the fatigue life of gears in electric vehicles
transmissions
V. Chaves, C. Madrigal, A. Navarro: Biaxial fatigue tests
and crack paths for AISI 304L stainless steel
V. Anes, L. Reis, B. Li, M. de Freitas: Evaluation of the
AZ31 cyclic elastic-plastic behavior under multiaxial loading
conditions
7
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
16.09.2014
16.30 – 16.45
16.45 – 17.00
17.00 – 17.15
17.15 – 17.30
17.30 – 17.45
17.45 – 18.00
18.00 – 18.15
18.15 – 18.30
8
SESSION 6. CHAIRMAN PAULO DE CASTRO
M. Neil James: Fracture-Safe and Fatigue-Reliable Structures
P. Corigliano, V. Crupi, E. Guglielmino, W. Fricke, FE
analysis of cruciform welded joints considering different mechanical
properties for base material, heat affected zone and weld metal
Y. Matvienko: The effect of thickness on out-of-plane constraint
in terms of the T-stress
D. Tumino, T. Ingrassia, V. Nigrelli, G. Pitarresi, V.
Urso Miano: Mechanical behavior of a sandwich with corrugated
GRP core: numerical modeling and experimental validation
A. Fernández-Canteli S. Blasón, J.A.F.O. Correia,
A.M.P. de Jesus: A probabilistic interpretation of the Miner
number for fatigue life prediction
A. A. Shanyavskiy, A. L. Toushentsov: In-service fatigue
cracking of propeller shafts in spline-pinned joints connecting with
engine shafts of AN-24, AN-26, and IL-18 aircraft
A. Carofalo, V. Dattoma, R. Nobile, F.W. Panella, G.
Alfeo, A. Scialpi, G.P. Zanon: Modification of creep and low
cycle fatigue behaviour induced by welding
M. da Fonte, L. Reis, M. de Freitas: The effect of steady
torsion on fatigue crack growth under rotating bending loading on
aluminium alloy 7075-T6
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
17.09.2014
09.00 – 09.15
09.15 – 09.30
09.30 – 09.45
09.45 – 10.00
10.00 – 10.15
10.15 – 10.30
10.30 – 10.45
10.45 – 11.00
SESSION 7. CHAIRMAN JESÚS TORIBIO
P. Lorenzino, G. Beretta, A. Navarro: Application of
digital image correlation (DIC) in resonance machines for
measuring fatigue crack growth.
O. Sucharda, J. Brozovsky: Numerical modelling of reinforced
concrete beams witch fracture-plastic material
A. Fernández-Canteli, L. Castañón, T. Holusová, B.
Nieto, M. Lozano, S. Seitl: Determining fracture energy
parameters of concrete from the modified compact tension test
D. Nappini, G. Zonfrillo: Evaluation of the material’s
damage in gas turbine rotors by instrumented spherical indentation
N. Mortaş, P. N. B. Reis, J. A.M. Ferreira: Impact response
of balsa core sandwiches
F. Libonati, L. Vergani: Analytical and numerical study of
crack-inclusion interaction in cortical bone
G. Zucca, M. Amura, L. Allegrucci, M. Bernabei: Failure
of cargo aileron’s actuator
D. S. Paolino, A. Tridello, H. S. Geng, G. Chiandussi,
M. Rossetto: Duplex S-N fatigue curves: statistical distribution
of the transition fatigue life
9
The First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues” Catania (Italy), September 15-17, 2014
17.09.2014
11.30 – 12.45
11.45 – 12.00
12.00 – 12.15
12.15 – 12.30
12.30 – 12.45
12.45 – 13.00
13.00 – 13.15
13.15 – 13.30
10
SESSION 8. CHAIRMAN GIUSEPPE FERRO
J. Toribio, B. González, J.C. Matos, F.J. Ayaso: Role of
the microstructure on the mechanical properties of fully pearlitic
eutectoid steels
P. N.B. Reis, A. M. Pereira, J.A.M. Ferreira, José D.M.
Costa: Interlaminar fracture in woven carbon/epoxy laminates
L. Guerra Rosa, J. Cruz Fernandes, B. Li: Integrated
assessment model for the fracture strength of glass components in
CSP systems
F. Curà, A. Mura, C. Rosso: Investigation about crack
propagation paths in thin rim gears
C. Maletta, E. Sgambitterra, F. Furgiuele: Measuring the
pseudoelastic properties of NiTi alloy by indentation experiments
M. Rossi, M. Sasso, G. Chiappini, E. Mancini, D.
Amodio: Identification of the plastic zone using digital image
correlation
V. Di Cocco, F. Iacoviello, A. Rossi, S. Natali: Fatigue
crack behavior on a Zn-Cu-Al SMA
V. Di Cocco, F. Iacoviello, A. Rossi, M. Cavallini: Stress
triaxiality influence on damaging micromechanisms in a pearlitic
ductile cast iron

Download Report