REACTION FIXTURE ASSEMBLY (RFA)

REACTION FIXTURE ASSEMBLY (RFA)
DESCRIPTION
Safety, accuracy and speed are values preached by Hytorc.
Reason for us to keep developping and improving our products.
The result of this process is a reaction arm which makes it
possible to work simultaneously with two tools.
Two tools can be connected to the Reaction Fixture Assembly
(RFA).
Adjustable in longitudinal direction to adapt to the mutual centre
distance of the bolts.
Safe, because both tools are each others reaction point and
conduct each others released forces. They don’t support against
a bolt and there is zero chance of operators getting pinched
between the reaction arm and reaction point.
Two carrying handles optimize the safety.
Another advantage is that the sideload diminishes and the wear
and need for maintenance decreases when the reaction point is
further away. There is less pressure on the tool.
The accuracy of the reached bolt load increases when the
reaction arm supports on a more distant point. This is of great
influence, especially in case of a small mutual centre distance
between the bolts.
The RFA is available in various sizes which makes it useful for
several applications. This reaction arm is interchangeable for:
AVANTI-series hydraulic torque wrench- socket type
ICE-series hydraulic torque wrench- socket type
jGUN series pneumatic torque wrench
FLASH series electric torque wrench
Available as a straight and U-shaped model. The U-shaped
model is designed to work round obstacles like partions.
Fast; tighten two bolt in the same time as one.
No more damaged valuable coatings or materials; the tool always
supports against a (neighbour)bolt and never against the flange,
housing or pipe.
The standard adaptable lengths are in stock, however any length
is possible. In stead of universal sockets, also twelve point
sockets, raised sockets and male hex sockets can be used.
MORE INFORMATION
HYTORC Nederland BV
| Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA | Ysselaarlaan 65B - 2630 Aartselaar - BELGIË
ENG-Productblad RFA.docx
| Tel : +32(0)38 - 705 220
| www.hytorc-benelux.be
Versie 1.1 nov-13
Reaction Fixture Assembly (RFA)
3D DRAWING
EXAMPLE
MORE INFORMATION
HYTORC Nederland BV
| Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA | Ysselaarlaan 65B - 2630 Aartselaar - BELGIË
ENG-Productblad RFA.docx
| Tel : +32(0)38 - 705 220
| www.hytorc-benelux.be
Versie 1.1 nov-13