bek ama x-f - BEKA Schréder

DESCRIPTION
MEDIUM BEAM
WIDE BEAM
bekamax-f
ordering data
LAMP
LAMP HOLDER
LUMEN
MASS (KG)
BEKAMAX-F 150W HPS-T
4
4
HST 150W
E40
15 000
14.7
BEKAMAX-F 250W HPS-T
4
4
HST 250W
E40
28 000
16.7
BEKAMAX-F 400W HPS-T
4
4
HST 400W
E40
48 000
17.2
BEKAMAX-F 600W HPS-T
4
4
HST 600W
E40
90 000
21
BEKAMAX-F 250W MH-T
4
4
HIT 250W
E40
20 000
16.7
BEKAMAX-F 400W MH-T
4
4
HIT 400W
E40
35 000
17.2
Standard colour: Natural aluminium
options and accessories
electrical
Switching control
Autolight assembly complete with lamp
Power change-over unit
MECHANICAL
Anti-vibration bracket
Mounting
Bottom entry
Pole clamp assembly
Colour
Extras
Grey (RAL 7045)
Other RAL colours available on request
Wireguard
PHOTOMETRICS
Beam angle
Medium
Wide
Designed and manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
07/14
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
[email protected] | www.beka-schreder.co.za
SANS 475
SANS 60598
OPTION: Pole clamp assembly
KEY ADVANTAGES
• Lamp compartment - IP 65
• Gear compartment - IP 65
• Die-cast aluminium housing
• Removable control gear
• No light pollution
CONSTRUCTION DETAILS
The luminaire consists of a one-piece die-cast aluminium
housing for the lamp and control gear.
It is designed to operate tubular 150/250/400/600W highpressure sodium lamps and 250/400W metal halide lamps.
SABS MARKS
The luminaire bears the SANS 475 performance mark and the
SANS 60598-2-5 safety mark.
INGRESS PROTECTION
The luminaire has a degree of protection that complies with
SANS 60598-2-5:
Lamp compartment: IP 65
Gear compartment: IP 65
The IP rating is certified by an SABS test report.
luminaire housing
• The housing is robustly constructed, weatherproof, hail
proof, corrosion proof and vandal resistant.
• It is manufactured from corrosion resistant die-cast
aluminium.
• The front glass covering the lamp compartment is
heat and impact resistant, held to the lamp housing by four
stainless steel clamps and sealed by an extruded heat
resistant silicon gasket.
• Reflectors are manufactured from 99.98% super pure deep
anodized aluminium and are not subject to accidental
misalignment.
• Precision-designed reflector technology projects the luminous
flux at a peak vertical angle of 67 degrees.
lamp holder housing
• The control gear compartment is separated for thermal
reasons from the lamp compartment.
• Access to the gear compartment is gained by removing a
separate die-cast aluminium cover which is held by four
captive stainless steel screws.
• The control gear is mounted on a removable gear tray and is
suitable for operation with the specified rating of the lamp
on a 230V +3%/-10% 50Hz single phase system.
• All screws, bolts and metal parts are stainless steel or anti corrosion treated material.
• Ignitors, where applicable, are of the superposed pulse type.
• The luminaire is power factor corrected to a minimum of 0,9.
190
Aerodynamic resistance - 0.085m2
644
light distributions
INTENSITY DISTRIBUTION
Medium Beam
BEKAMAX-F 400W HPS-T
500
800
600
400
TOP
200
• Inserted helicoils for lamp holder housing and the gear
compartment prevent the corrosion of stainless steel screws
to the aluminium housing.
135
90
45
0
400
300
TOP
200
45
90
Anti-light-pollution luminaire
RIGHT
LEFT
100
RIGHT
BOTTOM
0
180
mounting
fasteners
Wide Beam
BEKAMAX-F 400W HPS-T
LEFT
• The floodlight can either be mounted with a stirrup or by
means of a bottom entry pole cap suitable for a 76mm
diameter spigot.
• The stirrup is manufactured from 5 x 50mm hot dipped
galvanized steel.
• The pole cap is manufactured from die-cast aluminium and
is bolted to the housing.
650
BEKAMAX-F 600W
• Lamp replacement is facilitated from the side on the exterior
of the floodlight housing by a high-pressure die-cast
aluminium lamp holder housing.
gear compartment
415
ø130 to
156 Pole
185
172
• Security lighting
• Toll plazas
• Docks
• Airport aprons
485
650
399
• Area lighting
• Small sportsfield lighting
• Road interchanges
• Perimeter lighting
reflector system
175
APPLICATIONS
BEKAMAX-F 600W
415
Bottom entry
Luminous Intensity, cd/klm
Standard version
425
M10 bolts
and nuts
Stirrup version
Luminous Intensity, cd/klm
bekamax-f
DIMENSIONS IN MM
BOTTOM
135
0
90.0 67.5
180
45.0
22.5
Angle, degrees
0.0
22.5
45.0
67.5 90.0
Angle, degrees
HORIZONTAL ILLUMINANCE
BEKA
ISOLUX
H(m)
6.0 7.0 8.0
BEKAMAX-F 400W HPS-T
BEKAMAX-F 250W HPS-T
BEKAMAX-F 400W MH-T
BEKAMAX-F 250W MH-T
E (lx) x 1.0
E (lx) x 0.56
E (lx) x 0.67
E (lx) x 0.42
BEKA
ISOLUX
H(m)
6.0 7.0 8.0
-1H
E (lx)
1
37
22.2
14.8
7.4
3.7
28
16.8
11.2
5.6
2.8
E (lx) x 1.0
E (lx) x 0.56
E (lx) x 0.67
E (lx) x 0.42
-1H
E (lx)
0
0
1H
1H
2H
50
30
20
10
5
BEKAMAX-F 400W HPS-T
BEKAMAX-F 250W HPS-T
BEKAMAX-F 400W MH-T
BEKAMAX-F 250W MH-T
3H
50
30
20
10
5
37
22.2
14.8
7.4
3.7
2H
28
16.8
11.2
5.6
2.8
3H
4H
4H
1
0.74 0.56
0
1H
2H
3H
4H
5H
5H
0.74 0.56
0
1H
2H
3H
4H
5H
5H
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
OPTION: Pole clamp assembly
KEY ADVANTAGES
• Lamp compartment - IP 65
• Gear compartment - IP 65
• Die-cast aluminium housing
• Removable control gear
• No light pollution
CONSTRUCTION DETAILS
The luminaire consists of a one-piece die-cast aluminium
housing for the lamp and control gear.
It is designed to operate tubular 150/250/400/600W highpressure sodium lamps and 250/400W metal halide lamps.
SABS MARKS
The luminaire bears the SANS 475 performance mark and the
SANS 60598-2-5 safety mark.
INGRESS PROTECTION
The luminaire has a degree of protection that complies with
SANS 60598-2-5:
Lamp compartment: IP 65
Gear compartment: IP 65
The IP rating is certified by an SABS test report.
luminaire housing
• The housing is robustly constructed, weatherproof, hail
proof, corrosion proof and vandal resistant.
• It is manufactured from corrosion resistant die-cast
aluminium.
• The front glass covering the lamp compartment is
heat and impact resistant, held to the lamp housing by four
stainless steel clamps and sealed by an extruded heat
resistant silicon gasket.
• Reflectors are manufactured from 99.98% super pure deep
anodized aluminium and are not subject to accidental
misalignment.
• Precision-designed reflector technology projects the luminous
flux at a peak vertical angle of 67 degrees.
lamp holder housing
• The control gear compartment is separated for thermal
reasons from the lamp compartment.
• Access to the gear compartment is gained by removing a
separate die-cast aluminium cover which is held by four
captive stainless steel screws.
• The control gear is mounted on a removable gear tray and is
suitable for operation with the specified rating of the lamp
on a 230V +3%/-10% 50Hz single phase system.
• All screws, bolts and metal parts are stainless steel or anti corrosion treated material.
• Ignitors, where applicable, are of the superposed pulse type.
• The luminaire is power factor corrected to a minimum of 0,9.
190
Aerodynamic resistance - 0.085m2
644
light distributions
INTENSITY DISTRIBUTION
Medium Beam
BEKAMAX-F 400W HPS-T
500
800
600
400
TOP
200
• Inserted helicoils for lamp holder housing and the gear
compartment prevent the corrosion of stainless steel screws
to the aluminium housing.
135
90
45
0
400
300
TOP
200
45
90
Anti-light-pollution luminaire
RIGHT
LEFT
100
RIGHT
BOTTOM
0
180
mounting
fasteners
Wide Beam
BEKAMAX-F 400W HPS-T
LEFT
• The floodlight can either be mounted with a stirrup or by
means of a bottom entry pole cap suitable for a 76mm
diameter spigot.
• The stirrup is manufactured from 5 x 50mm hot dipped
galvanized steel.
• The pole cap is manufactured from die-cast aluminium and
is bolted to the housing.
650
BEKAMAX-F 600W
• Lamp replacement is facilitated from the side on the exterior
of the floodlight housing by a high-pressure die-cast
aluminium lamp holder housing.
gear compartment
415
ø130 to
156 Pole
185
172
• Security lighting
• Toll plazas
• Docks
• Airport aprons
485
650
399
• Area lighting
• Small sportsfield lighting
• Road interchanges
• Perimeter lighting
reflector system
175
APPLICATIONS
BEKAMAX-F 600W
415
Bottom entry
Luminous Intensity, cd/klm
Standard version
425
M10 bolts
and nuts
Stirrup version
Luminous Intensity, cd/klm
bekamax-f
DIMENSIONS IN MM
BOTTOM
135
0
90.0 67.5
180
45.0
22.5
Angle, degrees
0.0
22.5
45.0
67.5 90.0
Angle, degrees
HORIZONTAL ILLUMINANCE
BEKA
ISOLUX
H(m)
6.0 7.0 8.0
BEKAMAX-F 400W HPS-T
BEKAMAX-F 250W HPS-T
BEKAMAX-F 400W MH-T
BEKAMAX-F 250W MH-T
E (lx) x 1.0
E (lx) x 0.56
E (lx) x 0.67
E (lx) x 0.42
BEKA
ISOLUX
H(m)
6.0 7.0 8.0
-1H
E (lx)
1
37
22.2
14.8
7.4
3.7
28
16.8
11.2
5.6
2.8
E (lx) x 1.0
E (lx) x 0.56
E (lx) x 0.67
E (lx) x 0.42
-1H
E (lx)
0
0
1H
1H
2H
50
30
20
10
5
BEKAMAX-F 400W HPS-T
BEKAMAX-F 250W HPS-T
BEKAMAX-F 400W MH-T
BEKAMAX-F 250W MH-T
3H
50
30
20
10
5
37
22.2
14.8
7.4
3.7
2H
28
16.8
11.2
5.6
2.8
3H
4H
4H
1
0.74 0.56
0
1H
2H
3H
4H
5H
5H
0.74 0.56
0
1H
2H
3H
4H
5H
5H
Electronic data files can be downloaded from
www.beka-schreder.co.za/knowledge-base
DESCRIPTION
MEDIUM BEAM
WIDE BEAM
bekamax-f
ordering data
LAMP
LAMP HOLDER
LUMEN
MASS (KG)
BEKAMAX-F 150W HPS-T
4
4
HST 150W
E40
15 000
14.7
BEKAMAX-F 250W HPS-T
4
4
HST 250W
E40
28 000
16.7
BEKAMAX-F 400W HPS-T
4
4
HST 400W
E40
48 000
17.2
BEKAMAX-F 600W HPS-T
4
4
HST 600W
E40
90 000
21
BEKAMAX-F 250W MH-T
4
4
HIT 250W
E40
20 000
16.7
BEKAMAX-F 400W MH-T
4
4
HIT 400W
E40
35 000
17.2
Standard colour: Natural aluminium
options and accessories
electrical
Switching control
Autolight assembly complete with lamp
Power change-over unit
MECHANICAL
Anti-vibration bracket
Mounting
Bottom entry
Pole clamp assembly
Colour
Extras
Grey (RAL 7045)
Other RAL colours available on request
Wireguard
PHOTOMETRICS
Beam angle
Medium
Wide
Designed and manufactured by BEKA Schréder (Pty) Ltd - South Africa
Manufacturers of Luminaires and Glass Fibre Poles
07/14
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa
T: +27 11 238 0000 | F: +27 11 238 0180
[email protected] | www.beka-schreder.co.za
SANS 475
SANS 60598

Download Report