Hood-type Dishwasher DV 200.2 / DV 200.2 PW The “One for Two

Hood-type Dishwasher
DV 200.2 / DV 200.2 PW
Grou
Double-basket
hood-type machine
DV 200.2
p
Flush stainless steel surfaces
make the machine easy to clean
and maintain.
Double-basket hood-type machine
DV 200.2 PW
with Power-Wash programme
The “One for Two” concept
from the premium class
A machine for washing two baskets at the same time - that's the efficient added-value
concept of this completely new double-basket hood-type machine. As you would
expect, the performance is also high, with 120 baskets per hour. And the power wash
programme in model DV 200.2 PW ensures optimum cleaning of even the most difficult
dishes, kitchen implements, pots and pans, etc.. Performance and economy are
expertly combined in this model, providing much benefit and use to the customer.
DV 200.2 / DV 200.2 PW:
Details, data, and dimensions
1180
750
Entry height
440
1965
Two upper and lower wash
and rinse systems
1470
Two dish baskets
Double-walled tank and hood
150
850
DV 200 . 2
Electrical installation:
Electrical connection: 3 NPE, 400 V, 50 Hz.
The wiring complies with the requirements of the
German association for electrical, electronic, and
information technologies, VDE.
Dishwashing at twice the
value
For reasons of space and
utilisation, double-basket hoodtype machines are often the right
alternative to basket pass-through
machines. They can do twice as
much as one-tank models and are
still very economical even under
heavy use. The Variotronic
integrated in the DV 200.2 PW
with 3 pressure levels is only
available from MEIKO and is an
additional highlight of this
dishwasher system. The new
machines are brilliant not only due
to their special performance
characteristics, but also due to
their all-inclusive, premium-class
components, for example:
Fully electronic MIKE 2
control with integrated
infrared technology
DV 200.2
DV 200.2 PW
Basket dimensions (mm)
2 x 500 x 500
2 x 500 x 500
Baskets per hour (max.)
120
120
2.160
2.160
Plates per hour
“Active Plus” double
filtration system
Aqua-Stop system with
floor drain
Washing and rinsing arms
made of chrome-nickel
steel
Booster pump
Drain pump
Self-cleaning programme
Fully equipped with
connection set
Water installation:
The machines can be connected to the water supply without
the need for safety fittings . The flow pressure should be
0.6 to 5 bar. The installation regulations DIN 1988 and EN
1717 must be observed. Drain pipe 3/4”. On-site wall drain
max. 700 mm high . Length of the connection lines approx.
1.4 m from machine.
Glasses per hour
4.320
Pump motor kW
2 x 0,73
2 x 1,5
Tank capacity (litres)
40
40
Final rinse (litres)
6,4
6,4
Tank heating kW
4
4
45°C inlet temperature (kW)
15
15
10°C inlet temperature (kW)
18
18
45°C inlet temperature (kW)
17,1
19,4
10°C inlet temperature (kW)
20,1
22,4
Built-in boiler with
Total connected load for
Please contact us if you would like
more information on this model or
other MEIKO products.
DIN EN ISO 9001: 2000 / EN ISO 13485: 2003
Zertifikat Nr. 71 100 7 001 und 71 105 9 002
In accordance with the hygiene requirements of DIN 10511-H for commercial glasswashing and
DIN 10512-H for commercial dishwashing.
MEIKO Maschinenbau GmbH & Co. KG
Englerstr. 3 · 77652 Offenburg · Germany
Tel. (+49) 781/203-0 · Fax (+49) 781/203-1121
http://www.meiko.de · e-mail: [email protected]
1063.04.05 / FD / 2.500 GB
We reserve the right to make alterations
in the course of further development.

Download Report