eDM-CB-Colibri

eDM-CB-Colibri
DESIGNED AND DEVELOPED BY DATA MODUL
FEATURES

Baseboard (115mm x 76mm)

Power input +6 VDC to +24VDC (+/-5%)

TTL RGB 24Bit
Pre-Installed on the Colibri Module

Single Channel LVDS 24Bit
Linux (T20/T30/VFXX/IMX6)
WinCE 6.0 (T20/T30/VFXX)
WinEC 7.0 (T20/T30/VFXX/IMX6)
WinEC 2013 (T20/T30/VFXX/IMX6)

HDMI 1.3 (only T20/T30 Module)**

Audio AC97 Mic In, Line In, Line Out

3x USB 2.0 Type A

2x USB 2.0 internal on pin header

microSD Memory card slot*

UART on pin header

D-Sub RS232

2x CAN 2.0 on pin header (only VFxx)

RS485/422 on pin header

Ethernet 10/100 Mbit/s

SPI on pin header

I²C on pin header

Status LED

8x GPIO on pin header

BSP and OS from Toradex

RTC/ CMOS battery holder

4x Analog input on pin header

4-Wire Res Touch internal connector

Power supply to drive panels up to 10,4”
SOFTWARE
Operating Systems
ENVIRONMENTAL CONDITIONS
Operating
Temperature
0°C … +70°C (standard)
-40°C … +85°C (industrial) on request
OPTIONS
Display / Panel
4,3” Powertip PH480272T-006-I-Q incl. TP
7” CMI/ Innolux G070Y2-T02
EMBEDDED BOARD
Ordering
description
Kit eDM-CB_VF50
Kit eDM-CB_VF61
Kit eDM-CB_T20
Kit eDM-CB_T30
Kit eDM-CB_IMX6
EASY EMBEDDED KIT‘S
Ordering
description
Kit eDM-CB_VF50_PH480272T-006-I-Q
Kit eDM-CB_T20_G070Y2-T02
Note
Easy Embedded Kit includes
- eDM-CB-Colibri
- Colibri ARM Modul
- TTL or LVDS cable
- Backlight cable
- Panel / Display
- Touch*
- Touch cable*
* only available for Touch Panels/Kits
* Note: SDHC is supported, size depends on the operating system.
** Note: End-user products providing a HDMI interface might be subject to HDMI royalty. Please check the HDMI website for details:
http://www.hdmi.org/manufacturer/terms.aspx

Download Report