Breakout Cable ID: KABELOVNA Děčín Podmokly s.r.o. Ústecká 840/33, 405 33 Děčín 5 Czech Republic DIČ CZ26759993 tel.: +420 412 706 222 www.kabelovna.cz Z273 4.12.2014 ver.2 A-V(ZN)H2Y4Y WBF 12F This cable is suitable for outdoor use. Black PA outer jacket (Other colours available on request) Waterblocking E-glass FR-LSZH Simplex cable Water-swellable tape FRP dielectric central strength member (OD 2,5 mm), PE coated (OD 5,8 mm) Buffered optical fibre Rip cord Black MDPE inner jacket, UV stable Order example 2100 m A-V(ZN)H2Y4Y 12E9/125 G.657.A1 jacket coul our BLK, ti ght buffer, ca ble specifi ca ti on Z273 Buffer Sheat Marking Tight Free strip.up to 10cm strip.more than 100cm Colour Material Natur FR-LSZH Print colour Print method Print legend White INK-Jet manufacturer’s name, job number, type of cable, length marking @ 1 m intervals Other print legends available on request Other buffer colours available on request. Fibre Type Packaging Standard put-up length Plywood Single mode fiber 9/125 Multi mode fiber 50/125 Multi mode fiber 62,5/125 2100 m ± 5 % * * other lengths on request Drum size 8F 12F 1200×640×600 1200×640×600 See the Fibre Specification sheet KDP reserves the right to change the values in this document without prior notice.KDP is not responsible for any action taken pursuant to this document. This document is property of KDP. This document or any of its parts are not alowed to be redistributed without explicit consent of KDP. Page 1/2 Breakout Cable ID: KABELOVNA Děčín Podmokly s.r.o. Ústecká 840/33, 405 33 Děčín 5 Czech Republic DIČ CZ26759993 tel.: +420 412 706 222 www.kabelovna.cz Z273 4.12.2014 ver.2 A-V(ZN)H2Y4Y WBF 12F Mechanical and Environmental properties Test Cable outer diameter Cable weight Value 8F 11,6 ± 0,4 12F 13,9 ± 0,4 8F 114 12F 159 Unit Method mm EN 60811-1-1 kg/km Inner jacket thickness 1,2 mm Outer jacket thickness 0,5 mm Subunit diameter 2,0 mm - calculated Max. tensile strenghth 8F 2600 N EN 60974-1-2-E1 Max. tensile strenghth 12F 3500 N EN 60974-1-2-E1 2500 N EN 60974-1-2-E3 Crush resistance test Impact resistance test 3 Min. bend radius (no load) Min. bend radius (load) 15 20 Temperature range Installation Operation Storage Number of. impact × OD × OD -5 to + 50°C -20 to + 60°C -20 to + 60°C Comment EN 60974-1-2-E4 EN 60974-1-2-E11a EN 60974-1-2-E11b EN 60794-1-22-F1 - max. fiber strain 0,6 % - long term 280 N - no fiber strain for long term load - max. attenuation variation ≤ 0,1 dB at 1550 nm - no increase attenuation after the test - max. fiber strain 0,6 % - long term 550 N - no fiber strain for long term load - max. attenuation variation ≤ 0,1 dB at 1550 nm - no increase attenuation after the test - plate dimensions 100×100 mm - max. attenuation variation ≤ 0,1 dB at 1550 nm - duration of loading 1 min. - no increase attenuation after the test - impact energy 15 Nm, slightly damaged jacket - impact energy 20 Nm, no jacket cracking - max. attenuation variation ≤ 0,1 dB at 1550 nm - no increase attenuation after the test - max. attenuation variation ≤ 0,1 dB at 1550 nm - max. attenuation variation ≤ 0,1 dB at 1550 nm - max. attenuation variation ≤ 0,15 dB at 1550 nm - Dwell time acc.. to EN 60794-1-22-F1. - When installing or assembly under temperature bellow 5°C cable has to be stock in temp of 20°C at least 24h before installation. - no increase attenuation after the test Cable life time - minimum 30 years KDP reserves the right to change the values in this document without prior notice.KDP is not responsible for any action taken pursuant to this document.This document is property of KDP. This document or any of its parts are not alowed to be redistributed without explicit consent of KDP. Page 2/2
© Copyright 2024 ExpyDoc
