Air Blown Microcable ID: LM00 KABELOVNA Děčín Podmokly s.r.o. Ústecká 840/33, 405 33 Děčín 5 Czech Republic DIČ CZ26759993 tel.: +420 412 706 222 www.kabelovna.cz Z076 20.10.2014 ver.7 A-D2Y HD Blown Cable max.12F (200µm) This cable is suitable for Air-blowing. Green HDPE outer jacket (Grooved), UV stable Gel filled PBT loose tube with optical fibres The picture represents a cable with 12 fibres Order example 2100 m A-D2Y HD Bl own Cabl e 12E9/125G.657.A1 jacket colour GRN, ca ble s peci fi ca tion Z076 Fibre colour coding According to IEC 60304 1 Red 2 Green Fibre 3 BlueType 4 Yellow SMF ITU-T G.657 5 White SMF ITU-T G.652.D 6 Grey See the Fibre Specification sheet 7 Brown 8 Violet 9 Turquoise 10 Black 11 Orange 12 Pink Sheat Marking Print colour Print method Print legend Black INK-Jet manufacturer’s name, job number, type of cable, length marking @ 1 m intervals Other print legends available on request Other fibre colour sequences available on request Packaging Fibre Type Plywood Standard put-up length / Drum size 2100 m 450 Single mode fiber 9/125 (G.657.A1 FLEX ZWP 200 μm) See the Fibre Specification sheet KDP reserves the right to change the values in this document without prior notice.KDP is not responsible for any action taken pursuant to this document. This document is property of KDP. This document or any of its parts are not alowed to be redistributed without explicit consent of KDP. Page 1/2 Air Blown Microcable ID: KABELOVNA Děčín Podmokly s.r.o. Ústecká 840/33, 405 33 Děčín 5 Czech Republic DIČ CZ26759993 tel.: +420 412 706 222 www.kabelovna.cz Z076 20.10.2014 ver.7 A-D2Y HD Blown Cable max.12F (200µm) Mechanical and Environmental properties Test Value Unit Method 2,5 ± 0,1 mm EN 60811-1-1 Cable weight 5,4 kg/km Outer jacket thickness 0,5 mm Loose tube diameter 1,5 mm Cable outer diameter - calculated Max. tensile strength 50 N EN 60974-1-2-E1 Crush resistance test 500 N EN 60974-1-2-E3 Impact resista nce test 3 Number of. impact EN 60974-1-2-E4 Min. bend radius (no load) 10 × OD EN 60974-1-2-E11 Moisture resistance test Temperature range Installation Operation Storage Comment pass EN 60794-1-22-F5 -15 to + 50°C -40 to + 70°C -40 to + 70°C EN 60794-1-22-F1 - max. fibre strain 0,8% - long term 20N - no fibre strain for long term load - max. attenuation variation ≤ 0,1 dB at 1550 nm - no increase attenuation after the test - plate dimension 100×100 mm - max. attenuation variation ≤ 0,05 dB at 1550 nm - duration of loading 1 min. - no increase attenuation after the test - impact energy 3 Nm, slightly damaged jacket - impact energy 5 Nm, no jacket cracking - max. attenuation variation ≤ 0,05 dB at 1550 nm - no increase attenuation after the test - max. attenuation variation ≤ 0,05 dB at 1550 nm - no increase attenuation after the test - water height 1m - sample length 3m - no leakage on free sample end - duration of test 24h - max. attenuation variation ≤ 0,1 dB at 1550 nm - Dwell time in max. temperature 24 hours. - When installing or assembly under temperature bellow 5°C cable has to be stock in temp of 20°C at least 24h before installation. - no increase attenuation after the test Cable life time - minimum 30 years KDP reserves the right to change the values in this document without prior notice.KDP is not responsible for any action taken pursuant to this document. This document is property of KDP. This document or any of its parts are not alowed to be redistributed without explicit consent of KDP. Page 2/2
© Copyright 2024 ExpyDoc
