Manual for BSS-00316

Step 2
How to Use:
Press Button Once for Normal Light Output.
Press button Twice for High Light Output.
Solar Camping Lantern
Note:
Lamp Output will Dim as the Battery Loses Power.
Maintenance:
Lamp Assembly - Only use Cleaning Alcohol with a Cotton Swab. Use of other Volatile Cleaning
Agents could cause Irreparable Damage to the Plastic Components.
Solar Panel – Clean Glass Surface with Hot Soapy Water. Do Not Immerse the Panel in Water.
Do Not Allow Water in the Panel Junction Box On The Rear of the Panel.
Model: BSS-00316
Congratulations on the purchase of the Solarland Solar Camping Lantern. This kit includes
everything you will require to get the best performance from the unit using clean, safe solar power.
The Solar Camping Lantern can be installed permanently or moved from place to place.
Working Time
Safety Warning
Components
LOW Setting
10 hrs
(Fully Charged 3.5hrs)
Solar Panel - (1) 2.5W
solar panel with 3m wire for
lamp charging
28 LED Camping Lamp (1) LED lamp with
1500mAh lithium battery
HIGH Setting
5 hrs
Do not recharge the lantern when light is on.
Always recharge the lantern after use or when light goes dim.
Charge your lantern periodically if it is not used for 3 months.
Do not place the lantern in direct sunlight when charging.
Stop charging the device as soon as the Green LED lights up.
(Fully Charged 3.5hrs)
Technical Specifications
Battery
Solar Panel
Solar Charge Adaptor
(Optional Accessories)
- (6+1) different phone
charging adapters and a
mobile charge wire
AC Adaptor
(Optional Accessories) (1) allowing for charging from
grid power when required
Set Up and Use
Step 1
Ensure the solar panel is not exposed to the sun when connecting the panel to the lamp unit.
It is safe to place the panel in direct sunlight once the connection is made.
Voltage
3.7V
Technology
Lithium battery
Module Type
SLP2.5-04H
Power
2.5W
Current at peak power(Ipm)
440mA
Voltage at peak power(Vpm)
5.7V
Lamps
Overcharge and
over discharge
protection
Open circuit voltage(Voc)
7.1V
Type
1pc 28-LED
Short circuit current (Isc)
490mA
Power consumption 0.4W/0.9W
Irradiance and Cell Temperature
1000W/m² AM 1.5 25degreesC Light output
Capacity
25lm/56lm
Please avoid shadowing cells in
order to prevent solar module
reduction in power.
Do not drill holes in frame.
Charging
1.5Ah
Other
Power Supply
Note:
LED: charging indicator
Red------Battery is Charging.
Green---Battery is fully
charged.
Do not install module
on smooth roof.
LED: charging indicator
Warning:
Do not connect any other AC power or charger to solar panel plug or it will damage the system.
Flammable
Gases
The module must not be immersed
in water (either fresh or salt) or
constantly be exposed to water (either
fresh or salt) (i.e. from fountains, sea
spray).
Keep away from
fire.
Do not drop or
allow objects to
fall onto module.
Do not install
module near
flammable gases.
Do not destroy
modules, tear
down modules.
Do not install the
module or mounting
system in high
corrosion areas.
Do not mark the
back of modules
with sharp materials.
Do not stand or step on the glass
surface of a solar module. The
glass may break. The module
may also stop generating power.

Download Report