HHS CLEAN Highly ēective pre-cleaner and adhesion promoter specially tailored to the HHS products (primer function). High cleaning performance • Quick and ēective • Ēortlessly removes stubborn dirt Primer function • Better adhesion of the lubricant • Longer lubrication intervals • Cost and time savings Short flash-ō time • Short downtimes for treated parts • No after-treatment necessary Content in ml 500 Art. No. 0893 106 10 P. Qty. 1/12 Reduced service life due to solid dirt, taking an angular contact ball bearing as an example Areas of application: For pre-treating very dirty lubrication points, such as coarse and dirty grease, oil residues, resin, wax and much more. How HHS Clean works (primer function) Lubricant MWF - 12/13 - 09859 - © Source: FAG lubrication of rolling-contact bearings, Publ. No. WL 81 115/4 DA 7/99 Dirt Adhesion promoter Before treatment with HHS Clean. After treatment with HHS Clean, so-called "adhesion claws“ form that hold the lubricant molecules better. Fig. 1 This information is only a recommendation based on our experience. Preliminary testing required. The lubricant's molecules bind with the adhesion claw and in so doing ensure better adhesion of the lubricant and thus a long-lasting effect. Fig. 2 Good material compatibility on various surfaces • Very broad range of uses • Gaskets do not swell up Spraying head with direct spray jet Targeted and ēective cleaning of the dirty parts Acetone-free, AOX-free and silicone-free
© Copyright 2024 ExpyDoc
