details - Yaliny

For more details mail us at
[email protected]
Yaliny FPGA
Accelerator
Xilinx Kintex
Yaliny FPGA Accelerator is a high-performance FPGA accelerator
for hard-environment conditions with an enhanced user IP core
protection. It could be a part of a supercomputer or an industrial
system used in a harsh environment.
Yaliny FPGA accelerator has a high-performance Kintex UltraScale
FPGA from Xilinx and PCI-Express Gen3 x8 bus for high-speed data
interchange along with two independent banks of DDR3 and two
independent banks of SRAM.
It also comes with a software infrastructure for a quick and easy
start.
To ensure protection of your IP core we included an enhanced
encryption.
To help you to use our FPGA accelerator at a full potential and to
simplify a development process, we’ll provide you with a full support.
ADVANTAGES
●
Two FPGA chips: main FPGA chip Kintex UltraScale from
Xilinx for high-performance computations and secondary
FPGA for maintenance and reconfiguration
●
Easy-to-use and zero-latency SRAM on board
●
High-performance bus: PCI-Express Gen3 x8
●
2 independent banks of 1GB DDR3
●
Enhanced encryption
SOFTWARE
●
IP-Core Artix-7 for reconfigurable Kintex UltraScale FPGA:
○
AXI Bridge for PCI-Express Gen2 x1
○
EMC NAND Flash controller with last successful
beatstream
○
AXI Interconnect
○
MicroBlaze DSP and boot loader for agile
reconfiguration of Kintex UltraScale FPGA
●
Beatstream loader and boot configurer for GNU/Linux
●
Linux driver to access MicroBlaze’s registers and user’s beat
streams stored in NAND FLASH
●
IP-Core Kintex UltraScale FPGA for kickstart:
○
AXI Bridge for PCIe Gen3 x8
○
DDR3 SDRAM Controller
○
SRAM Controller
○
EMC Controller
○
AXI interconnect
○
AXI central DMA
○
Predefined AXI interface for user IP core
○
FIFO-based interface for user IP core and AXI
interaction
●
IP-Core Kintex UltraScale FPGA examples
APPLICATION AREAS
●
Data encryption and decryption
●
Digital signal processing
●
Stream image and video processing
●
Data processing and Сorrelation detection
●
Radar and sonar beamforming
ADDITIONAL INFORMATION
●
mail us at [email protected]
●
or visit our web site
Xilinx, Kintex, UltraScale and MicroBlaze are trademarks of Xilinx Inc. All trademarks are property of respective owners.
Use QR code to visit our site
FEATURES
●
Processor:
○
Main FPGA Xilinx Kintex UltraScale XCKU0602FFVA1156I
■
580,440 Logic Cell
■
663,360 CLB Flip-Flops
■
331,680 CLB LUTs
■
38.0Mb Block RAM
■
System Monitor
■
Integrated PCIe blocks
○
Additional FPGA XC7A35T-2CSG324I for remote
reconfiguration via PCI-Express bus
●
PCI-Express Gen3 x8 EndPoint host connection, more that
7GByte/sec sustained host bandwidth
●
Memory
○
4Gb NAND FLASH for predefined and user
configurations
○
2GB DDR3 1600 MT/s; 2 independent banks of
1GB and 32-bit data bus
○
32MB SRAM 2ns /r/w; 2 independent banks of
16MB and 32-bit data bus
●
IP Encryption Key (with an innovative ability to change onboard battery without losing information)
●
Standards supported
○
PICMG CPCI-S.0;
○
PICMG 2.0 R3.0 CPCI Core Specification;
○
PICMG 2.01 R2.0 Hot Swap;
○
PICMG 2.09 R1.0 System Management Bus;
○
PICMG 2.10 R1.0 Keying
●
FPGA Mezzannine Card compatible with LPC ANSI/VITA
57.1 FMC Standard
●
JTAG IEEE1149.1 port for a debugging
PROPERTIES
●
Operating Temperature: -40C°C to +80°C
●
Cooling via heat-sink or via CCA Front Board Cassette
●
Humidity: up to 93% (optional)

Download Report