PRODUCT CATALOGUE 2014

PRODUCT CATALOGUE 2014
MODERN INSULATION MATERIALS
MADE OF WOOD AND CELLULOSE
HIGH-QUALITY INSULATION. SUSTAINABLE LIVING.
www.homatherm.com
Contents
Not only does your choice of high-grade HOMATHERM® products assure you of quality insulation for your building, but
you will also gain excellent and sustainable protection against noise, heat and moisture well into the future. The extensive
product range comprises flexible wood and cellulose insulating batts, compression resistant wood insulation boards and loose
cellulose fill.
The diversity of properties such as format, thickness or hydrophobic render these modern insulating materials and their clever
01. Flexible insulating batts
combinations ideal for the insulation of roofs, walls, façades, ceilings or floors.
holzFlex® standard holzFlex® protect
flexCL® Opt for modern, healthy and assured insulation. Naturally with HOMATHERM®.
Economical and lightweight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 04
For the highest demands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 06
Optimal for acoustic insulation and dry construction . . . . . . . . . . . . . . . . . page 08
02. Compression resistant insulation boards
UD-Q11 protect
USD-Q11 protect
HDP-Q11 standard
HDP-Q11 protect
TS-Q11 protect
ID-Q11 standard
WF-classic
Tip: Our recommendation, your decision.
The advantage icons highlight the advantages of each product at a glance.
1
The energy- and cost-saving underlay board. . . . . . . . . . . . . . . . . . . . . . . . .page 10
The under-rafter insulation for plastered surfaces. . . . . . . . . . . . . . . . . . . . page 12
The economical universal high-performance insulation board. . . . . . . . page 14
The heavy duty one for roofs, floors and top storey ceilings. . . . . . . . . . page 16
The highly effective under-screed footfall sound insulation board. . . . page 18
The interior insulation board to plaster over. . . . . . . . . . . . . . . . . . . . . . . . . . page 20
The classic wooden fibreboard panel for dry areas. . . . . . . . . . . . . . . . . . . page 22
03. Loose fill
This insulation is/has:
2
fineFloc®
and in this configuration is particularly effective in ensuring:
The loose cellulose fill to blow in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24
04. CTIS EnergiePlus
flexible
2
suitable for
clamping
pressureresistant
highly
pressureresistant
extremly
pressureresistant
easy to
process
suitable for
machine
processing
waterproofed
throughout
stepped
profile
tongueand-groove
energysaving
heat
protection
moistureproofing
sound
insulation
fireproofing
ecological
compatibility
EnergiePlus comfort
EnergiePlus massive
EnergiePlus FR
Accessories
The homogeneous plaster base board for timber frame construction. . . . page 26
Ideal for façades for brick walls and solid wood construction. . . . . . . . . page 28
The wood fibre insulation board with tested flame proofing. . . . . . . . . . page 30
Tools and system components for CTIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32
3
01. FLEXIBLE INSULATING BATTS
APPLICATIONS
holzFlex® standard
Types of application in accordance with
DIN 4108-10: DZ; DIzk; WH; WIzk; WTR
ECONOMICAL AND LIGHTWEIGHT.
Insulation of timber beam ceilings
Insulation of compartments in walls in
timber frame and timber panel construction
Insulation of service cavities
Insulation between rafters
Their outstanding properties in terms of building physics and practical application of holzFlex® standard wood fibre insulating batts render them the preferred product for
timber stud walls, facing or service cavities. The high flexibility of HOMATHERM holzFlex® standard greatly simplifies its application and allows optimal adaptation to the
wall studs.
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured using a dry process
Uniformly cross-linked in three dimensions
holzFlex® standard
Friction fit width up to 900 mm possible
Flexible, extremely adaptable, will bend
Vapour permeable
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
4
More information on the product: www.homatherm.com/en/holzflex-standard
Plan your needs online now: www.homatherm.com
holzFlex® standard between pitched roof rafters
ensures top heat protection and is skin-friendly
during installation.
TECHNICAL DATA
Description
Wood fibre insulating batt
WF-EN 13 171-T2-TR1.0-MU3-AFr5
National technical approval (DIBt)
Z-23.15-1417 [DE]
ACERMI N° 09/113/567 [FR]
Complete declaration
Wood fibres, polyolefin fibres 7 %,
ammonium polyphosphate 8 %
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
Raw density (ca.)
40 kg/m³
Tensile strength perpendicular
to the plane of the board
≥ 1.0 kPa
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.038 W/(mK) [EU, CH]
λR = 0.040 W/(mK) [DE]
λr = 0.042 W/(mK) [AT]
λcertifiée = 0.039 W/(mK) [FR]
Flow resistance per meter
≥ 5 kPa∙s/m²
Dynamic rigidity
≥ 4 MN/m³
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105; 170201
holzFlex® standard on concrete floor and plaster
as thermal protection in roof insulation, e.g. with
attic finishes.
holzFlex® standard between timber studs and
between exterior wall battens protects from
noise, heat and cold.
FORMATS
Form of supply
Flexible mats, uniformly cross-linked in three dimensions
Format [mm]
1220 x 580
Batt thickness [mm]
40
50
60
80
100
120
140
160
180
200
400
500
600
700
800
900
900
900
900
900
Max. friction fit width [mm]
Flexible insulating batts | holzFlex® standard
Insulation of top storey ceilings
5
01. FLEXIBLE INSULATING BATTS
APPLICATIONS
holzFlex® protect
Types of application in accordance with
DIN 4108-10: DADdk, DZ; DIzk; WH; WIzk; WTR
Insulation between rafters
Insulation of compartments in walls in
timber frame and timber panel construction
FOR THE HIGHEST DEMANDS.
Insulation of timber beam ceilings
Insulation of top storey ceilings
Insulation of service cavities
May be used behind HOMATHERM
rendered façade systems
®
The high flexibility of holzFlex® protect means excellent workability and
optimal fit to rafter shapes, also offering top protection from heat.
holzFlex® protect between timber studs provides top thermal, heat,
acoustic and moisture protection through its perfect combination of
properties in terms of building physics.
The high flexibility of holzFlex® protect enables simple application and optimal fit to the rafter shape. HOMATHERM holzFlex® protect offers a perfect combination of
properties in terms of building physics (protection against heat, noise and moisture) for diverse applications – perfect for application between rafters and for façade or
on-roof insulation.
YOUR INSULATION ADVANTAGES AT A GLANCE:
holzFlex® protect
Manufactured using a dry process
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
6
More information on the product: www.homatherm.com/en/holzflex-protect
Plan your needs online now: www.homatherm.com
Wood fibre insulating batt
WF-EN 13 171-T2-TR2,5-MU3-AFr5
National technical approval (DIBt)
Z-23.15-1417 [DE]
ACERMI N° 09/113/531 [FR]
Complete declaration
Wood fibres, polyolefin fibres 7 %,
ammonium polyphosphate 8 %
FORMATS
Manufacturing process
Dry process
Form of supply
Flexible mats, uniformly cross-linked in three dimensions
Specific heat capacity
2100 J/(kg∙K)
Format [mm]
1220 x 580
Raw density (ca.)
55 kg/m³
Batt thickness [mm]
30
40
60
80
100
120
Tensile strength perpendicular
to the plane of the board
≥ 2,5 kPa
Max. friction fit width [mm]
400
400
500
800
950
1100 1100 1100 1200 1200
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.038 W/(mK) [EU, CH]
λR = 0.040 W/(mK) [DE]
λr = 0.042 W/(mK) [AT]
λcertifiée = 0.038 W/(mK) [FR]
Flow resistance per meter
≥ 5 kPa∙s/m²
Dynamic rigidity
≥ 4 - 8 MN/m³
Flexible, extremely adaptable, will bend
Vapour permeable
TECHNICAL DATA
Description
Uniformly cross-linked in three dimensions
Friction fit width up to 1200 mm possible
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105; 170201
140
160
180
200
Flexible insulating batts | holzFlex® protect
TECHNICAL DATA
7
01. FLEXIBLE INSULATING BATTS
APPLICATIONS
flexCL
Types of application in accordance with
DIN 4108-10: DADdk; DZ; DI; WH; WI; WTR
OPTIMAL FOR ACOUSTIC INSULATION
AND DRY CONSTRUCTION.
Compartment insulation for timber frame
and timber panel walls
®
Areas with special requirements for acoustic
insulation
Insulation of timber beam ceilings, top storey
ceilings, suspended ceilings, cellar ceilings
between load-bearing beams, service
cavities, dry walls
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured from newspaper
Uniformly cross-linked in three dimensions
flexCL®
Friction fit width up to 1100 mm possible
Flexible, extremely adaptable, will bend
Vapour permeable
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
8
More information on the product: www.homatherm.com/en/flexcl
Z-23.11-1978
Plan your needs online now: www.homatherm.com
flexCL® between storey ceiling battens. This
solution for insulation is particularly suited for
areas needing high acoustic insulation.
flexCL® also form-fits asymmetrical sections,
avoiding acoustic and thermal bridges as
effectively as usual.
Insulation between rafters
TECHNICAL DATA
Description
Cellulose insulation batt
National technical approval (DIBt)
Z-23.11-1978
Europäisch technische Zulassung
ETA-03/0057
Complete declaration
Cellulose from newspaper, polyolefin fibres,
boric acid ≤ 5 %, mixture of inorganic salts
Manufacturing process
Dry process
Specific heat capacity
2000 J/(kg∙K)
Raw density (ca.)
70 kg/m³
Tensile strength perpendicular
to the plane of the board
≥ 2,5 kPa
Water vapour diffusion resistance factor μ
2-3
Thermal conductivity
λD = 0,039 W/(mK) [EU, CH]
λR = 0,042 W/(mK) [DE]
λr = 0,042 W/(mK) [AT]
Flow resistance per meter
43 - 76 kPa∙s/m²
Dynamic rigidity
3 - 7 MN/m³
Fire protection
Euro class in accordance with EN 13501-1: E
TECHNICAL DATA
Mould-resistance
Category 0 (in accordance with EN ISO 846,
Table 4) no risk of mould
Disposal code in acc. with AVV
170604
FORMATS
Form of supply
Flexible insulation batts, uniformly cross-linked in three dimensions
Format [mm]
1200 x 625
Batt thickness [mm]
30
40
50
60
80
100
400
400
500
500
750
900 1000 1000 1000 1100
Max. friction fit width [mm]
120
140
160
180
Flexible insulating batts | flexCL®
The highly adaptable, high-performance and easy to apply insulating material for acoustic insulation requirements closely fits the stud shapes, thus preventing acoustic
bridges. The compact material structure and high absorption ensure maximum acoustic protection. The flexible insulating batt offers very good moisture control within
the building element, effectively utilising the cavity behind interior claddings.
Pitched roof, external roof renovations: flexCL®
between rafters.
9
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
THE ENERGY- AND COST-SAVING
UNDERLAY BOARD.
Additional benefit without additional cost. HOMATHERM® UD-Q11 protect offers you more than just wind and rain protection: With its low thermal conductivity and
thicknesses up to 160 mm, it saves you energy and also scores top results for protection from heat and noise.
HOMATHERM® UD-Q11 protect protect is your
energy efficient and cost-saving underlay board
for a wind-tight and water-draining layer under
the roofing material.
TECHNICAL DATA
Its high stability in terms of form and edges
renders HOMATHERM® UD-Q11 protect a top
quality product.
UD-Q11 protect is simple to apply using
conventional woodworking tools and may
even be used as an emergency roof for up to
10 weeks.
TECHNICAL DATA
Wood fibre insulation board
WF-EN 13171-T4-CS(10/Y)200-TR7,
5-WS1, 0-MU3-AFr100
Short-term water absorption
≤ 1.0 kg/m²
Fire protection
Euro class in accordance with EN 13501-1: E
National technical approval (DIBt)
Z-23.15-1417 [DE]
ACERMI N° 11/113/705 [FR]
Disposal code in acc. with AVV
030105, 170201
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Non-skid surface
Specific heat capacity
2100 J/(kg∙K)
Form of supply
Homogeneous boards
Vapour permeable
Raw density (ca.)
190 kg/m³
Edge profile
Tongue and groove
National technical approval
Compressive modules of elasticity
3.0 N/mm²
Thicknesses [mm]
22*, 35, 52, 60
80, 100, 120, 140, 160
Compressive stress at 10 % deformation
≥ 200 kPa
2525 x 615
1825 x 615
Tensile strength perpendicular
to the plane of the board
≥ 7,5 kPa
Delivery and calculation
dimension
Coverage dimensions
2500 x 590
1800 x 590 mm
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.043 W/(mK) [EU]
λD gemäß SIA 279 = 0.044 W/(mK) [CH]
λR = 0.046 W/(mK) [DE]
λr = 0.047 W/(mK) [AT]
λcertifiée = 0.047 W/(mK) [FR]
Description
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured using a modern dry process
Circumferential symmetrical tongue and groove
UD-Q11 protect
High compressive strength
Hydrophobic throughout
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
Flow resistance per meter
≥ 100 kPa∙s/m²
FORMATS
* Delivery and calculation dimension: 2520 x 610 mm
MAXIMUM DISTANCE BETWEEN RAFTER CENTRES
Thicknesses [mm]
22
35
52
60
80, 100, 120, 140, 160
Max. rafter spacing [cm]
85*
100
110
110
90
Compression resistant insulation boards | UD-Q11 protect
UD-Q11 protect
Types of application in accordance with
DIN 4108-10: DADds, DIzg, DEOds; WABds,
WH, WIzg, WTR
Wind-tight, water-draining second layer under
various roofing materials
Underlay board with insulation between
rafters (e.g. with holzFlex® protect)
Underlay board on various on-roof insulation
systems
As emergency roof, weather exposable for up
to 10 weeks
Exterior insulation behind timber frame
construction façades (directly on wall studs),
solid timber wall, ventilated solid construction
façades
* Switzerland: 65 cm
10
More information on the product: www.homatherm.com/en/ud-q11-protect
Plan your needs online now: www.homatherm.com
11
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
USD-Q11 protect
Types of application in accordance with
DIN4108-10: WABds, WH, WIzg, WAP
Plasterable under-rafter insulation
Other treatments: smoothing, coating,
wallpaper
Additional wind- and rain-proof insulation
for ventilated façades
The under-rafter insulation, with render (reinforcing compound, reinforcing
fabric, smoothing plaster), is used as additional insulation in areas where
low rafter heights limit insulation thickness between rafters, or where
particularly low U-values are required.
USD-Q11 protect is an under-rafter insulation for plastered surfaces, for effective roof renovation from the inside. USD-Q11 protect may also be used for improving the
thermal protection of walls with ventilated façades.
TECHNICAL DATA
YOUR INSULATION ADVANTAGES AT A GLANCE:
Description
Wood fibre insulation board
WF-EN 13171-T4-CS(10/Y)100-TR10-WS1,
0-MU3-AFr100
National technical approval (DIBt)
Z-23.15-1417 [DE]
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
Raw density (ca.)
160 kg/m³
Compressive stress at 10 % deformation
≥ 100 kPa
Tensile strength perpendicular
to the plane of the board
≥ 10 kPa
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.042 W/(mK) [EU, CH]
λR = 0.045 W/(mK) [DE]
λr = 0.046 W/(mK) [AT]
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 1.0 kg/m²
Manufactured using a modern dry process
In a new fire protection class
USD-Q11 protect
All-round tongue and groove
High compressive strength
Hydrophobic throughout
Vapour permeable
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
12
More information on the product: www.homatherm.com/en/usd-q11-protect
Plan your needs online now: www.homatherm.com
HOMATHERM® USD-Q11 protect behind the exterior cladding.
Structure from inside to outside:
Interior cladding
Installation battens with
holzFlex® standard
Panelling (OSB)
Timber studs with
holzFlex® standard
USD-Q11 protect
Ventilation
Exterior cladding
TECHNICAL DATA
Fire protection
D s1 d0 according with EN 13 501-1,
K Report no.: 12021007A
Disposal code in acc. with AVV
030105, 170201
FORMATS
Form of supply
Homogeneous boards
Edge profile
Tongue and groove
Thicknesses [mm]
40, 60, 80, 100
Delivery and calculation
dimension
1825 x 615
Coverage dimensions
1800 x 590
MAXIMUM DISTANCE BETWEEN RAFTER CENTRES
Thicknesses [mm]
40
60
80
100
Delivery and calculation
dimension
625
850
850
950
Compression resistant insulation boards | USD-Q11 protect
THE UNDER-RAFTER INSULATION
FOR PLASTERED SURFACES.
13
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
THE ECONOMICAL UNIVERSAL
HIGH-PERFORMANCE INSULATION BOARD.
On-roof insulation on sheathing or without
sheathing, using double threaded screws
and large format boards. Exterior insulation
behind façade claddings (on sheathing, solid
timber walls)
Interior insulation of walls and ceilings
Full-surface insulation covering thermal
bridges
Easy application and outstanding insulation properties render the HDP-Q11 standard a high-performance insulation board suitable for virtually any application. Be it
insulation for roofs, walls or ceilings – you cannot go wrong with the HDP-Q11 standard. Because the board saves energy in winter, keeps heat out in summer and offers
noise protection all year round.
HDP-Q11 standard
Vapour permeable
14
More information on the product: www.homatherm.com/en/hdp-q11-standard
Plan your needs online now: www.homatherm.com
TECHNICAL DATA
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 2.0 kg/m²
National technical approval (DIBt)
Z-23.15-1417 [DE]
ACERMI N° 11/113/669 [FR]
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105, 170201
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
FORMATS
Raw density (ca.)
110 kg/m³
Form of supply
Homogeneous boards
Compressive modules of elasticity
1.0 N/mm²
Edge profile
Rabbet edge
Compressive stress at 10 % deformation
≥ 50 kPa
Thicknesses [mm]
3
140, 160, 180, 200,
220
40, 60, 80, 100, 120
Water vapour diffusion resistance factor μ
140, 160, 180, 200,
220, 240
Thermal conductivity
λD = 0.038 W/(mK) [EU]
λD gemäß SIA 279 = 0.039 W/(mK) [CH]
λR = 0.040 W/(mK) [DE]
λr = 0.042 W/(mK) [AT]
λcertifiée = 0.040 W/(mK) [FR]
Delivery and calculation
dimension
1265 x 615 mm
1815 x 615 mm
1250 x 600 mm
Coverage dimensions
1250 x 600 mm
1800 x 600 mm
-
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
Optimal thermal conductivity and rabbet edge
for gapless laying render the HDP-Q11 standard
the heavy-duty insulation board for virtually any
application.
Wood fibre insulation board
WF-EN 13171-T3-CS(10/Y)20-WS2.0-MU3AFr100
Description
Manufactured using a modern dry process
Top storey ceiling: Insulation against unheated
attics with HDP-Q11 standard.
Top storey ceilings (low compressive load)
TECHNICAL DATA
YOUR INSULATION ADVANTAGES AT A GLANCE:
Low thermal conductivity
Pitched roof: Homogeneous on-roof insulation
with HDP-Q11 standard.
Flat
Compression resistant insulation boards | HDP-Q11 standard
HDP-Q11 standard
Types of application in accordance with
DIN 4108-10: DADdm, DZ, DIzg, DEOdm,
WABdm, WH, WIzg, WTR
15
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
HDP-Q11 protect
Types of application in accordance with
DIN 4108-10: DADdm, DAAdh, DZ, DIzg,
DEOdm, WABdm, WH, WIzg, WTR
Flat and on-roof insulation on sheathing
Exterior insulation of timber stud walls behind
façade claddings
Insulation on raw ceilings (e.g. under the screed)
Other floor insulation systems
Top storey ceilings
Flat roof: Exterior insulation of residential and
industrial buildings with HDP-Q11 protect.
Interior insulation of walls and ceilings
HDP-Q11 protect – an extremely compression resistant functional board by HOMATHERM®. This wood fibre insulation board is particularly suited for flat roof construction
and floor substructures. With its robust compressive strength and a raw density of 140 kg/m3, it nevertheless offers perfect thermal protection and is easily applied. With
single layer laying, it creates an efficient combination of economy and excellent properties in terms of building physics.
Thanks to its robust compressive strength,
HDP-Q11 protect is particularly well suited for
floor substructures whilst also offering perfect
thermal protection.
TECHNICAL DATA
Wood fibre insulation board
WF-EN 13171-T3- DS(70,-)2-CS(10/Y)100-TR10WS1.0-MU3-AFr100
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 1.0 kg/m²
National technical approval (DIBt)
Z-23.15-1417 [DE]
ACERMI N° 10/113/645/1 [FR]
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105, 170201
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
FORMATS
Vapour permeable
Raw density (ca.)
140 kg/m³
Form of supply
Homogeneous boards
National technical approval
Compressive modules of elasticity
1.5 N/mm²
Edge profile
Rabbet edge
Flat
Dimensional stability under defined
temperature and moisture conditions
DS (70,-)2
Thicknesses [mm]
140, 160, 200, 240
40, 60, 80, 100, 120
Compressive stress at 10 % deformation
≥ 100 kPa
Delivery and calculation
dimension
1265 x 615 mm
1250 x 600 mm
Tensile strength perpendicular
to the plane of the board
≥ 10 kPa
Coverage dimensions [mm]
1250 x 600
-
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.039 W/(mK) [EU]
λD gemäß SIA 279 = 0.040 W/(mK) [CH]
λR = 0.042 W/(mK) [DE]
λr = 0.043 W/(mK) [AT]
λcertifiée = 0.043 W/(mK) [FR]
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured using a modern dry process
High compressive strength
HDP-Q11 protect
Low thermal conductivity
Hydrophobic throughout
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
16
TECHNICAL DATA
Top storey ceiling: Compressive load resistant
insulation solution for easily accessible attics
with HDP-Q11 protect.
More information on the product: www.homatherm.com/en/hdp-q11-protect
Plan your needs online now: www.homatherm.com
Description
Compression resistant insulation boards | HDP-Q11 protect
THE HEAVY DUTY ONE FOR ROOFS,
FLOORS AND TOP STOREY CEILINGS.
17
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
TS-Q11 protect
Types of application in accordance with
DIN-4108-10: DESsg
THE HIGHLY EFFECTIVE UNDER-SCREED
FOOTFALL SOUND INSULATION BOARD.
Interior insulation of ceiling or floor slab
(upper side), under screed, where acoustic
insulation is required
TS-Q11 protect may also be installed as sound absorbing layer under
flooring.
TS-Q11 protect allows immediate use of ceilings and floors.
TS-Q11 protect has outstanding acoustic transmission reducing properties and may be used for all floor constructions, including wet and dry screeds. Its low dynamic
rigidity under higher service loads and high resistance to compression render the wood fibre insulation board highly resilient, providing very good footfall sound protection.
Description
Wood fibre insulation board
WF-EN 13171-T6-WS1.0-MU3-AFr100-SD25-CP2
National technical approval (DIBt)
Z-23.15-1417
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Hydrophobic throughout
Specific heat capacity
2100 J/(kg∙K)
Vapour permeable
Raw density (ca.)
160 kg/m³
National technical approval
Dynamic rigidity
25 MN/m³
Declared level for compressibility
CP2
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.039 W/(mK) [EU, CH]
λR = 0.042 W/(mK) [DE]
λr = 0.043 W/(mK) [AT]
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 1.0 kg/m²
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105, 170201
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured using a modern dry process
Outstanding sound transmission reducing properties
Low thermal conductivity
TS-Q11 protect
Low compressibility
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
18
More information on the product: www.homatherm.com/en/ts-q11-protect
Plan your needs online now: www.homatherm.com
TECHNICAL DATA
Form of supply
Homogeneous boards
Edge profile
Flat
Thicknesses [mm]
31/30
Format [mm]
1250 x 600
Compression resistant insulation boards | TS-Q11 protect
TECHNICAL DATA
19
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
ID-Q11 standard
Types of application in accordance with
DIN 4108-10: WH, WIzg
THE INTERIOR INSULATION BOARD TO
PLASTER OVER.
Interior insulation of brick construction
(plasterable)
Interior insulation of timber construction
walls (plasterable)
Outside walls: Inside insulation on brickwork with the plasterable interior
insulation board HOMATHERM® ID-Q11 standard.
TECHNICAL DATA
TECHNICAL DATA
Wood fibre insulation board
WF-EN 13171-T4-CS(10/Y)50-TR7,5-WS2.0MU3-AFr100
Form of supply
Homogeneous boards
Edge profile
Flat
National technical approval (DIBt)
Z-23.15-1417
Thicknesses [mm]
22*, 40, 60, 80
Manufactured using a modern dry process
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Format [mm]
1250 x 600
Plasterable surface
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
Raw density (ca.)
130 kg/m³
Compressive stress at 10 % deformation
≥ 50 kPa
Tensile strength perpendicular
to the plane of the board
≥ 7,5 kPa
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.039 W/(mK) [CH, GB, FR]
λR = 0.042 W/(mK) [DE]
λr = 0.043 W/(mK) [AT]
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 2.0 kg/m²
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105, 170201
Description
YOUR INSULATION ADVANTAGES AT A GLANCE:
ID-Q11 standard
Low thermal conductivity
Hydrophobic throughout
Vapour permeable
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
20
More information on the product: www.homatherm.com/en/id-q11-standard
Plan your needs online now: www.homatherm.com
* Jamb panels are available as accessories.
Compression resistant insulation boards | ID-Q11 standard
Wood as a raw material lends the ID-Q11 standard capillary and moisture regulating properties, preventing interior moisture damage, if properly installed. The
ID-Q11 standard also maintains a pleasant, healthy indoor climate. The interior insulation board may be used in brick as well as timber constructions.
HOMATHERM® ID-Q11 standard for solid wood and timber frame
construction.
21
02. COMPRESSION RESISTANT INSULATION BOARDS
APPLICATIONS
WF-CLASSIC
Cover board on levelling fill
For walls and ceilings behind the exposed
panelling
THE CLASSIC WOODEN FIBREBOARD
PANEL FOR DRY AREAS.
Industrial use, e.g. as packaging material
The traditional softboard WF-classic, manufactured using a wet process. Suited for interior work and various other applications; the WF-classic is easy to work by using
conventional woodworking machines and tools.
TIP
Manufactured using the traditional wet process
on planning and
installation
Form of supply
Square edged panels
Complete declaration
Wood fibres, wood based resins
Format [mm]
2500 x 1200 mm
Apply panels dry and prevent damage.
Manufacturing process
Wet process
Thicknesses [mm]
8, 10, 12, 15, 18, 20
Provide adequate ventilation if working permanently
in processing dust.
Specific heat capacity
2100 J/(kg∙K)
Raw density (ca.)
240 kg/m³
Compressive stress at 10 % deformation
≥ 100 kPa
Tensile strength perpendicular
to the plane of the board
≥ 5 kPa
Thermal conductivity
λD = 0.050 W/(mK)
Fire protection
Euro class in accordance with EN 13501-1:E,
normal combustibility BKZ as per VKF
(Switzerland): 4.3, normal combustibility,
low smoke emission
Max. short-term working temperature
100 °C
Disposal code in acc. with AVV
030105; 170201
Good acoustic insulating properties
Protect from direct moisture.
Moisture-regulating through high absorption/adsorption
Ideal for laying underneath floor coverings
We also recommend using a conventional dust mask.
More information on the product: www.homatherm.com/en/wf-classic
FORMATS
Porous wood fibre panel EN 622- 4 (Type SB)
Store WF-classic stacked on level surface.
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
22
Description
Vapour permeable
General purpose panels in dry areas
TECHNICAL DATA
Plan your needs online now: www.homatherm.com
Compression resistant insulation boards | WF-classic
YOUR INSULATION ADVANTAGES AT A GLANCE:
23
03. LOOSE FILL
APPLICATIONS
fineFloc
®
Insulation between rafters blown on or in.
Compartment insulation for timber frame
and timber stud walls
Intermediate insulation for timber panel
construction
THE LOOSE CELLULOSE
FILL TO BLOW IN.
Open blowing onto collar beam planes and
ceilings
Its excellent flow properties render fineFloc® a first choice in blow-in insulation. As a cellulose insulating material it boasts all the properties of an ecological product.
fineFloc® effectively fills roof and wall cavities to the last corner and, as blow-on insulation on loft floors, protects attics from entry and loss of heat.
YOUR INSULATION ADVANTAGES AT A GLANCE:
TECHNICAL DATA
Top flow properties
Reliably settlement-free
fineFloc®
Vapour permeable
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
24
More information on the product: www.homatherm.com/en/finefloc
fineFloc® is also used to easily and quickly apply large insulation
thicknesses to roof and wall cavities. Mechanical installation allows
transport and production of the insulating material to be carried out in a
single work step.
Plan your needs online now: www.homatherm.com
Installation of gapless insulation of exposed beams and uneven surfaces
using HOMATHERM fineFloc® is carried out by a certified specialist.
HOMATHERM GmbH trains installers and issues personal licences after
successful completion of training.
Description
Loose fill made of cellulose
Technical approval
DIBt: Z-23.11-1262 [DE]
ETA - 12/0474
Complete declaration
Cellulose from newspaper, flame retardant,
mixture of inorganic salts
Specific heat capacity
1600 J/(kg∙K)
Raw density (ca.)
Loose fill, dry: 35 kg/m3,
space-filling, dry: 40 – 60 kg/m3
Water vapour diffusion resistance factor μ
1/2
Thermal conductivity
λD = 0.040 W/(mK) [EU]
λR = 0.042 W/(mK) [DE]
Flow resistance per meter
5 - 20 kPa∙s/m²
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
170604
Form of supply
Bags of 12.5 kg
Note: HOMATHERM fineFloc® must be installed according to the application guidelines. Machine
installation must be carried out by trained specialist firms. fineFloc® must be protected against
moisture during transport and installation and in storage.
Loose fill | fineFloc®
Ideal for renovation
25
04. CTIS ENERGIEPLUS
APPLICATIONS
THE HOMOGENEOUS PLASTER BASE BOARD
FOR TIMBER FRAME CONSTRUCTION.
The homogeneous plaster base board for composite thermal insulation systems (CTIS) in timber frame constructions, WDVS EnergiePlus comfort, manufactured using
an innovative dry process. Fitted with tongue and groove, plaster base boards are mounted full surface directly onto the timber studs.
Plaster base board for composite thermal
insulation systems (e.g. WDVS EnergiePlus
comfort) in timber frame construction
The plaster base board is designed specifically for use in timber frame
construction, in respect of format, rigidity and hydrophobic property. It may
therefore be mounted directly on the wall studs, creating a perfect and
stable substrate for plastering.
TECHNICAL DATA
TECHNICAL DATA
Wood fibre insulation board
WF-EN13171-T4-TR20-CS(10/Y)100-WS1.0MU3-AFr100
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 1.0 kg/m²
National technical approval (DIBt)
Z-23.15-1417 Plaster base board
Z-33.47-905 CTIS EnergiePlus comfort
Fire protection
Euro class in accordance with EN 13501-1: E
Disposal code in acc. with AVV
030105, 170201
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
Specific heat capacity
2100 J/(kg∙K)
High compressive strength
Raw density (ca.)
185 kg/m³
Form of supply
homogeneous boards
Hydrophobic throughout
Compressive stress at 10 % deformation
≥ 100 kPa
Edge profile
tongue and groove
Vapour permeable
Tensile strength perpendicular
to the plane of the board
≥ 20 kPa
Thicknesses [mm]
22*, 40, 60, 80, 100, 120, 140, 160
60, 80
Water vapour diffusion resistance factor μ
Delivery and calculation dimension [mm]
1325 x 615
2625 x 1205
3
Thermal conductivity
up to
60 mm
thick:
λD = 0.043 W/(mK) [EU]
λD gem. SIA 279 = 0.044 W/(mK) [CH]
λR = 0.046 W/(mK) [DE]
λr = 0.047 W/(mK) [AT]
Coverage dimensions [mm]
1300 x 590
2600 x 1180
from
80 mm
thick:
λD = 0.039 W/(mK) [EU]
λD gem. SIA 279 = 0.040 W/(mK) [CH]
λR = 0.042 W/(mK) [DE]
λr = 0.043 W/(mK) [AT]
Description
YOUR INSULATION ADVANTAGES AT A GLANCE:
Manufactured using a modern dry process
Plasterable surface
EnergiePlus comfort
Low thermal conductivity
All-round symmetrical tongue and groove
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
26
Thermal bridges are largely avoided. Thicknesses up to 160 mm assure
outstanding thermal protection in a single work step.
More information on the product: www.homatherm.com/en/energieplus-comfort
Plan your needs online now: www.homatherm.com
FORMATS
* Jamb panels are available as accessories.
CTIS EnergiePlus | EnergiePlus comfort
EnergiePlus comfort
Types of application in accordance with
DIN 4108-10: WABds, WAPzh, WH, WIzg
27
04. CTIS ENERGIEPLUS
APPLICATIONS
EnergiePlus massive
IDEAL FOR FAÇADES FOR BRICK WALLS
AND SOLID WOOD CONSTRUCTION.
Types of application in accordance with
DIN 4108-10: WABdm, WAPzh, WH, WIzg
Plaster base board for composite thermal
insulation systems (e.g. CTIS EnergiePlus
massive) in solid wood and brick
construction
The EnergiePlus massive plaster base board is laid full-surface on solid timber walls and mechanically fastened using clamps or insulating material
screws. The EnergiePlus massive plaster base board is glued full-surface to brickwork and mechanically fastened using insulating material screw plugs.
The entire area may then be rendered (incl. reinforcing fabric) and a finishing plaster applied.
Compressive load resistant and ideal in terms of size and weight, the EnergiePlus massive plaster base board is ideal for composite thermal insulation systems in solid
wood and brick construction. In addition to acoustic insulation, this façade insulation also offers all the options of appealing, contemporary insulation.
YOUR INSULATION ADVANTAGES AT A GLANCE:
EnergiePlus massive
High compressive strength
Hydrophobic throughout
Vapour permeable
National technical approval
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
28
More information on the product: www.homatherm.com/en/energieplus-massive
Plan your needs online now: www.homatherm.com
Short-term water absorption
≤ 1.0 kg/m²
Fire protection
Euro class in accordance with EN 13501-1: E
National technical approval (DIBt)
Z-23.15-1417 [DE] Plaster base board
Z-33.43-943 CTIS EnergiePlus massive
Disposal code in acc. with AVV
030105, 170201
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %
Manufacturing process
Dry process
FORMATS
Specific heat capacity
2100 J/(kg∙K)
Form of supply
Homogeneous boards
Raw density (ca.)
140 kg/m³
Edge profile
Flat
Compressive stress at 10 % deformation
≥ 100 kPa
Thicknesses [mm]
22*, 40, 60, 80
100, 120, 140, 160
Tensile strength perpendicular
to the plane of the board
≥ 10 kPa
Delivery and calculation
dimension [mm]
1250 x 600
845 x 600
Water vapour diffusion resistance factor μ
3
Thermal conductivity
λD = 0.039 W/(mK) [EU]
λD gemäß SIA 279 = 0.040 W/(mK) [CH]
λR = 0.042 W/(mK) [DE]
λr = 0.043 W/(mK) [AT]
λcertifiée = 0.043 W/(mK) [FR]
Manufactured using a modern dry process
Low thermal conductivity
TECHNICAL DATA
Wood fibre insulation board
WF-EN13171-T4-TR10-CS(10/Y)100-WS1.0MU3-AFr100
Description
Plasterable surface
* Jamb panels are available as accessories.
CTIS EnergiePlus | EnergiePlus massive
TECHNICAL DATA
29
04. CTIS ENERGIEPLUS
APPLICATIONS
EnergiePlus FR
Types of application in accordance with
DIN 4108-10: WABds, WAPzh, WH, WIzg
The plaster base board is designed specifically for use in timber frame
construction, in respect of format, rigidity and hydrophobic property. It may
therefore be mounted directly on the wall studs, creating a perfect and
stable substrate for plastering.
EnergiePlus FR is a homogeneous plaster base board with optimised fire protection to Euro class C “flame resistant” in accordance with DIN EN 13501-1. This plaster base
board sets new standards.
TECHNICAL DATA
NEW
TECHNICAL DATA
Wood fibre insulation board
WF-EN13171-T4-TR10-CS(10/Y)100-WS1.0MU3-AFr100
Fire protection
Euro class in accordance with EN 13501-1: C
Disposal code in acc. with AVV
030105, 170201
National technical approval (DIBt)
Z-23.15-1417 Plaster base board
ETA-10/0289 CTIS EnergiePlus
Approved plasters and accessories
Competent advice:
Tel. +49 34651 416900 [DE, EU]
Complete declaration
Wood fibres, PMDI bonding 4 %, paraffin 1 %,
fire retarder 12 %
High compressive strength
Manufacturing process
Dry process
Hydrophobic throughout
Specific heat capacity
2100 J/(kg∙K)
Form of supply
Homogeneous boards
Raw density (ca.)
170 kg/m³
Edge profile
Tongue and groove
Compressive stress at 10 % deformation
≥ 100 kPa
Thicknesses [mm]
60, 80, 100
Tensile strength perpendicular
to the plane of the board
≥ 10 kPa
Delivery and calculation
dimension [mm]
1325 x 615
Water vapour diffusion resistance factor μ
3
Coverage dimensions [mm]
1300 x 590
Thermal conductivity
λD = 0.042 W/(mK) [EU]
λR = 0.045 W/(mK) [DE]
Flow resistance per meter
≥ 100 kPa∙s/m²
Short-term water absorption
≤ 1.0 kg/m²
YOUR INSULATION ADVANTAGES AT A GLANCE:
CTIS board with
flame protection
Manufactured using a modern dry process
Plasterable surface
EnergiePlus FR
Low thermal conductivity
Description
All-round symmetrical tongue and groove
Vapour permeable
Improved flammability classification
Information sur le niveau d‘émission de
substances volatiles dans l‘air intérieur,
présentant un risque de toxicité par
inhalation, sur une échelle de classe allant
de A+ (très faibles émissions) à C (fortes
émissions)
30
Thermal bridges are largely avoided. Thicknesses up to 160 mm assure
outstanding thermal protection in a single work step.
More information on the product: www.homatherm.com/en/energieplus-fr
Plan your needs online now: www.homatherm.com
FORMATS
CTIS EnergiePlus | EnergiePlus FR
THE WOOD FIBRE INSULATION BOARD
WITH TESTED FLAME PROOFING.
Base board for rendering for thermal
insulation composite systems
(e.g. CTIS EnergiePlus comfort) in timber
frame construction
31
BASE RAILS
Accessories
Description
TOOLS AND SYSTEM COMPONENTS FOR
THE COMPOSITE THERMAL INSULATION
SYSTEM (CTIS).
HOMATHERM® offers you many accessories for composite thermal insulation systems; they are flexible in their application to suit your needs, enabling professional processing of the
plaster base board using suitable tools. We can offer you tools, dowels, base rails and system components, among other.
TOOLS (GENERAL)
ENERGIEPLUS SCREW PLUG (PLATE SCREWS)
SYSTEM COMPONENTS
(PLASTER COMPONENTS)
Description
Description
Base rail
43 mm
2 m length, anodised aluminium
EnergiePlus reinforcing fabric fine white, 4 x 4 mm neutral 1.10 m wide
EnergiePlus reinforcing compound (adhesive)
Base rail
63 mm
2 m length, anodised aluminium
EnergiePlus fabric corner protection 10 x 15 cm, white, 2.50 m long
EnergiePlus plaster base white
EnergiePlus diagonal reinforcement
EnergiePlus plaster base tinted
EnergiePlus fabric connection strip 1.40 m
EnergiePlus splash water protection
EnergiePlus fabric connection strip 2.40 m
EnergiePlus moulding plaster
EnergiePlus plug-on profile with fabric 250 cm, VWS fabric ca. 125 mm
EnergiePlus modelling plaster tinted
EnergiePlus joint sealing tape BG2 15/2 – 5, roll length: 18.0 m
EnergiePlus insulation base white
EnergiePlus joint sealing tape BG2 15/5 – 12, roll length: 9.0 m
EnergiePlus silicon resin plaster K 2 white
EnergiePlus joint sealer 290 ml/cartridge
EnergiePlus silicon resin plaster K 2 tinted, colour class 1 no additive
EnergiePlus expansion gap profile 2.50 m
EnergiePlus silicon resin plaster K 3 white
EnergiePlus plaster termination profile 2.40 m
EnergiePlus silicon resin plaster K 3 tinted, colour class 1 no additive
EnergiePlus lintel corner angle
EnergiePlus silicon resin plaster R 3 white (no stock product, delivery
time on request)
Base rail
83 mm
2 m length, anodised aluminium
Base rail
103 mm
2 m length, anodised aluminium
Base rail
123 mm
2 m length, anodised aluminium
Base rail
143 mm
2 m length, anodised aluminium
Base rail
163 mm
2 m length, anodised aluminium
Base rail
183 mm
2 m length, anodised aluminium
Base rail
203 mm
2 m length, anodised aluminium
Base rail
223 mm
2 m length, anodised aluminium
Base rail
243 mm
2 m length, anodised aluminium
Angular rail
thermal
isolation
2 m length, plastic
Base edge profile
thermal
isolation
2,5 lfm/Stück
EnergiePlus friction bearing profile upper part 6 mm; 2.5 m
EnergiePlus friction bearing profile lower part 9 mm; 2.5 m
Description
Description
Screw length in mm
Insulation thickness in mm
Description
Screw length in mm
Insulation thickness in mm
HOMATHERM® insulating material knife for flexCL® and holzFlex®
Plate screw
80
40
Masonry plugs
115
80
Base rail connector
30 mm
Professional sharpener for HOMATHERM® insulating material knife
Plate screw
100
60
Masonry plugs
135
100
Base rail corner profile
43 mm
length: 0,835 m
EnergiePlus drip edge profile 2.0 m
HOMATHERM® cutting table with tool holder for electric tenon saw
Plate screw
120
80
Masonry plugs
155
120
Base rail corner profile
63 mm
length: 0,835 m
EnergiePlus roof ventilation profile 2.5 m
83 mm
length: 0,835 m
Electric tenon saw DW391 to match HOMATHERM® cutting table
Plate screw
140
100
Masonry plugs
175
140
Plate screw
160
120
Masonry plugs
195
160
Base rail corner profile
103 mm
length: 0,835 m
Plate screw
180
140
Masonry plugs
215
180
Base rail corner profile
123 mm
length: 0,835 m
Plate screw
200
160
Masonry plugs
235
200
Base rail corner profile
143 mm
length: 0,835 m
Plate screw
220
180
Masonry plugs
255
220
Base rail corner profile
163 mm
length: 0,835 m
HOMATHERM® Vapour control layer MA
Plate screw
240
200
Masonry plugs
275
240
HOMATHERM® Renovation layer MK
Plate screw
260
220
Cover for masonry plug
Plate screw
280
240
Plate screw
300
260
SEALING STRIPS AND FASTENERS
Description
HOMATHERM® Adhesive tape C6
HOMATHERM® Primer
HOMATHERM® Cartridges, adhesive
More information on the product: www.homatherm.com/en/energieplus-zubehoer
EnergiePlus metal sheet connection profile with fabric 2.50 m
EnergiePlus movement profile 2.50 m
Base rail corner profile
HOMATHERM® circular serrated blade knife 13/106.5
32
ENERGIEPLUS MASONRY PLUG (INSULATION ANCHORS)
Screw length in mm
SYSTEM COMPONENTS
(PLASTER CONNECTION PROFILES)
EnergiePlus silicon resin plaster R 3 tinted, colour class 1 no additive
EnergiePlus mineral light plaster K 2 white
EnergiePlus mineral light plaster K 2 tinted, colour class 1 no additive
EnergiePlus mineral light plaster K 3 white
EnergiePlus mineral light plaster K 3 tinted, colour class 1 no additive
EnergiePlus mineral light plaster R 3 white (no stock product, delivery
time on request)
EnergiePlus mineral light plaster R 3 tinted, colour class 1 no additive
EnergiePlus façade paint special white
EnergiePlus façade paint special tinted
EnergiePlus façade paint intense tinted
Additives, hues, plaster colour class 2
Additives, hues, plaster colour class 3
Additives, hues, colour class 4
WDVS EnergiePlus | Zubehör
04. CTIS ENERGIEPLUS
33
HIGH-QUALITY INSULATION. SUSTAINABLE LIVING.
HOMATHERM® insulating materials made of wood and cellulose.
ENERGY SAVING
Avoiding costs and also preserving
the environment.
HOMATHERM® offers you:
U value of your choice
Low thermal conductivity from
λD = 0.038 W/(mK)
Dimensionally stable insulation
PROTECTION
FROM MOISTURE
PROTECTION
FROM HEAT
ACOUSTIC
INSULATION
Sustainable home-comfort climate
for generations.
Enjoy heat protection –
phase shifted by > 10 hours.
For all demands. For a new
quality of life.
HOMATHERM® offers you:
HOMATHERM® offers you:
HOMATHERM® offers you:
Vapour-permeable construction
High specific heat capacity
Absorbing fibre structure
Absorbing and adsorptive
properties
High raw density
Low dynamic rigidity
Low thermal conductivity
High flow resistance per meter
Excellent buffering of moisture
in the building element
34
ECOLOGY
100 % tested environmentally safe
insulating materials made of
wood & cellulose.
HOMATHERM® offers you:
Constructions without chemical
wood protection
Virtually no VOC and
formaldehyde emission
CO2-neutral process heat
recovery
RESULT
RESULT
RESULT
RESULT
RESULT
Economical and
responsible building
Long-term
structural protection
Just 160 mm HOMATHERM®
insulation material delivers
a 10 hour phase shift
Pleasantly quiet
living areas
Healthy indoor climate,
building for healthy living
35
ANY QUESTIONS? SIMPLY PHONE US.
Version: 10-2014
USE THE FOLLOWING ADDRESSES
FOR EXPERT ADVICE:
HOMATHERM GmbH
Ahornweg 1 · D-06536 Berga, Germany
T +49 34651 4160 · F +49 34651 41639
[email protected]
Hotline
+49 34651 41661
Hotline
+44 844 8802478
Austria
T +49 151 14255044 · F +49 34651 41639
[email protected]
Holland
T +31 575 564805 · F +31 575 564815
[email protected]
Switzerland
T +41 31 7356030 · F +41 31 7356029
[email protected]
Belgium/Luxembourg
T +32 474 837023 · F +32 16 534703
[email protected]
Italy
T +39 0471 704017 · F +39 0471 704073
[email protected]
This document is applicable in conjunction with other HOMATHERM® documentation. Please heed our detailed application notes in your application. National building regulations must be complied with. Information on and suitability of the material for the intended purpose must
in each case be examined by the customer. HOMATHERM® accepts no liability. This also applies to printing errors and subsequent amendments to technical data.
This document is valid from the date of printing and supersedes all previous information. HOMATHERM GmbH reserves the right to modify products without prior notice or to remove products from the range altogether. All the information in this brochure is given without assurance
of completeness, currency or correctness. HOMATHERM GmbH accepts no liability and gives no warranty relating to any use of the information in this document, in full or in part. All information is given without guarantee and does not constitute an assurance of properties. Confirmation by HOMATHERM GmbH of binding statements shall be in writing, with validity restricted exclusively to the specifically addressed party. Such confirmation shall not release a customer from in depth examination of his selected products for suitability for his application.
HOMATHERM GmbH absolutely excludes any liability for information provided, for slightly negligent breach of duty and for printing errors. As a formality it is also pointed out that national building regulations should be noted. Reprinting or electronic reproduction, in full or in part,
is prohibited unless by written consent of HOMATHERM GmbH.
HIGH-QUALITY INSULATION. SUSTAINABLE LIVING.
www.homatherm.com

Download Report