CFP4 I CPF2 I CFP SYSTEMS eQSFP+ SYSTEM

EngInEErEd To ConnECT
CFP4 I CPF2 I CFP SYSTEMS
eQSFP+ SYSTEM
ConnECTor SoluTIonS
CFP HIGH SPEED ConnECtoR SyStEm
Yamaichi Electronics is a market leader of CFP high speed connector products and the first company
which made these connectors available to the global market. Complete component solutions from
connectors to mechanical components are provided for CFP4/CPF2/CFP.
All products are following the MSA standard.
CFP4 - SERIES Cn121-056
FEatuRES
•Compliant with Multi Source Agreement (MSA), CFP4 design guideline
• Meets CEI-28G-VSR requirement defined by OIF
• Host connector, plug connector plus mechanical kit are available
• Pin count 56 with 0.6mm pitch
• Transmission speed: 28Gbps/ch max.
• Customization of heat sink is possible
PaRt numBERS
PaRt DESCRIPtIon
CN121S-056-0001
Host connector, surface mount type
CN121P-056-0004
Plug connector, straddle mount type
CN121G-056-0001
Quad port connector cover
CN121G-056-0002
Single port connector cover
CN121C-056-0001
Quad port module cage
CN121C-056-0002
Single port module cage
CN121F-056-0001
Single port heatsink
CFP4 - EvaluatIon BoaRD
FEatuRES
•Supports 4 x 28Gbps interface
• Low PCB loss
• All high speed line lengths are matched
• Less impedance variation
• Supports MCLK port
• 2.4mm coax connector
Cfp2 - SerieS CN121-104
feAtUreS
•CFP2MultiSourceAgreement(MSA)compliant(singleanddualslotversions)
•Hostconnector,plugconnectorplusmechanicalkitareavailable
•AvailableasCFP2singleslotversion.Alsopossibletomountbelly-to-belly
•Pincount104with0.6mmpitch
•Transmissioncharacteristics,highspeedethernet:25Gbps/ch,
4ch=100Gbpsperslot(for40Gbpsand100Gbpsapplicationperslot)
•MSAstandardandYAMAICHIridingheatsinkensure
efficientthermaldissipation
pArt NUmberS
pArt DeSCriptioN
CN121S-104-0001
Hostconnector,surfacemounttype
CN121P-104-0003
CN121G-104-0001
Plugconnector,straddlemounttype
Hostconnectorcover
(dualversionwithscrews)
CN121G-104-0002
Hostconnectorcover
(singleversionwithscrews)
CN121C-104-0001
Cage(dualversion)
CN121C-104-0002
CN121F-104-0001
CN121M-104-0001
Cage(singleversion)
Heatsink(MSAstandard)
singleversionwithside-to-sidefins
(forsingle/dualCFP2version)
Cliptofixheatsink
(standardsingleversion)
Cfp - SerieS CA009
feAtUreS
•CFPMultiSourceAgreement(MSA)compliant
•Hostconnector,plugconnectorplusmechanical
kitareavailable
•Foropticalmoduleswith40Gbps&100Gbps,
10Gbps/channel
•Pincount148with0.8mmpitch
•Ridingheatsinkensuresefficientthermaldissipation
eQSFP+ ConnECTor and KIT
The enhanced QSFP+ connector (eQSFP+) and mechanical kit with transmission capability
of 32Gbps per channel. All products are following the MSA standard.
eQSFP+ SErIES Cn120
hoST ConnECTor
ParT nuMbEr
Cn120 - 038 - 000
*
Series
No. of Contacts
FEaTurES
• QSFP Multi-Source Agreement (MSA) compliant
• Transmission characteristics: 32Gbps / ch, 4ch=128Gbps / connector
• Compatible with existing QSFP (Infiniband: QDR / FDR / EDR) module
• Fully compatible foot pattern with existing QSFP connector
• Contact area planting variation: 1, Au 0.76μm min 2, Au0.40μ min
• Lead-free soldering capable
• Tape and Reel packaging
• RoHS compliant
Design Number
Contact Plating 1 = 0.76μm Au
2 = 0.40μm Au
ParT nuMbEr
MEChanICal KIT
Cn120a - ** 0 *
- *
Series
Cage Assembly Type:
11 = 1 x 1 Assembly
14 = 1 x 4 Assembly
Product Type:
1 = EMI Elastomer Gasket
2 = Through Bezel (Spring Finger)
FEaTurES
• Complies with W7SFF-8683
• Light pipe option for single and double
• Heat sink with 3 different heights (4.2, 6.5 and 13.5mm)
TECHNICAL DATA ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE
Heatsink:
0 = No Heatsink
1 = With Heatsink (Ht. = 13.5mm)
2 = With Heatsink (Ht. = 6.5mm)
3 = With Heatsink (Ht. = 4.2mm)
Light Pipe:
0 = No Light Pipe
1 = Single Light Pipe (Cut-out ∅2.11)
2 = Dual Light Pipe (Cut-out ∅2.11)
3 = Single Light Pipe (Cut-out ∅2.54)
4 = Dual Light Pipe (Cut-out ∅2.54)
5 = Single Light Pipe (Cut-out ∅2.67)
6 = Dual Light Pipe (Cut-out ∅2.67)
YaMaIChI ElEC TronICS
Deutschland GmbH
Concor Park
Bahnhofstraße 20
85609 Aschheim-Dornach
Germany
YaMaIChI ElEC TronICS
Italia s.r.l.
Centro Direzionale Colleoni
Via Colleoni, 1
Palazzo Taurus Ing. 1
20864 Agrate Brianza (MB)
Italy
YaMaIChI ElEC TronICS
GB Ltd.
6 The Clockhouse
Stratton Park
Micheldever
Hampshire SO21 3DP
Great Britain
Phone
Fax
E-Mail
Web
Phone
Fax
E-Mail
Web
Phone +44 (0)7808 493377
Fax
+44 (0)1962 774902
E-Mail [email protected]
Web www.yamaichi.eu
+49 (0)89 45109 - 0
+49 (0)89 45109 - 110
[email protected]
www.yamaichi.eu
+39 039 6881-185
+39 039 6892-150
[email protected]
www.yamaichi.eu
Version Sept. 2014
*
CFP Connector System
TEST FIXTURE FOR CFP4
CFP4
Host Board
Part Number: CA012-02-02
APPLICATIONS
For CFP4 Module
Development and Testing
CFP4
Passive Breakout Module A
Part Number: CA012-02-03
APPLICATIONS
For CFP4 Host Board Development and
High Speed Signal Compliance Testing
CFP4
Passive Breakout Module B
Part Number: CA012-02-04
APPLICATIONS
For CFP4 Host Board
Development and Channel Evaluation
TEST FIXTURE FOR CFP2
CFP2
Host Board
Part Number: CA012-03-01
4 x 25G
APPLICATIONS
For CFP2 4x25G Module
Development and Testing
CFP2
Passive Breakout Module A
Part Number: CA012-03-03
4 x 25G
APPLICATIONS
For CFP2 Host Board Development and
High Speed Signal Compliance Testing
CFP2
Passive Breakout Module B
Part Number: CA012-03-04
4 x 25G
APPLICATIONS
For CFP2 Host Board Development
and Channel Evaluation
FeaturEs
•CEI 28GVSR MCB compliant
•Matched all H.S. trace length
•GPPO connector for high speed
•Support MDIO
•Support control signal monitoring
•Support MSA input control
•Built-in heat sink (option)
FEATURES
•CEI-28G-VSR HCB compliant
•Matched all H.S. trace length
•GPPO connector for high speed
•Only support H.S. lane
•No latching mechanism
FeaturEs
•Full lane signal break out
•Support MCKL and ref. CLK port
•GPPO connector interface
•Support control signals monitoring
FeaturEs
•CEI 28GVSR MCB compliant
•Matched all H.S. trace length
•GPPO RF connector for H.S.
•Support MDIO
•Control signal monitoring
•Support MSA input control
FeaturEs
•CEI-28G-VSR HCB compliant
•Matched all H.S trace length
•GPPO RF connector for H.S.
•Only support high speed lane
•No latching mechanism
FeaturEs
•Full lane signal break out
•Support MCKL / ref. CLK port
•GPPO connector interface
•Control signals monitoring
•No latching mechanism

Download Report