latest program - 24th CIRP Design Conference

24th CIRP DESIGN CONFERENCE
Monday, April 14th
09:00 am – 12:30 am
Auditorium Giorgio Gaber
Plenary Session
Co-Chaired by G. Moroni (Politecnico di Milano) and T. Tolio (ITIA-CNR)
Conference Opening
A. De Crinito (Regione Lombardia), E. Ceretti (AITeM)
Conference Keynotes
Design: a key stage of product lifecycle
A. Bernard, E. Coatanea, F. Christophe, F. Laroche
A Conceptual Framework for Value-Driven Design and Systems Engineering
B.D. Lee, C.J.J. Paredis
A New Engineering Design Paradigm – The Quadruple Bottom Line
W. ElMaraghy, H. ElMaraghy
Design for process is a key for Additive Manufacturing Innovative Application
G.N. Levy
Monday, April 14th
01:30 pm – 03:30 pm
Sala Pirelli
Complex Systems Architecting
• Communication in multidisciplinary systems architecting - G.M. Bonnema
• Systematic comparison of functional models in SysML for design library evaluation – B.
Kruse, T. Gilz, K. Shea, M. Eigner
• Parameter-oriented visualization of a Modelica model with a numerical data
integration feature – H. Komoto, S. Kondo, K Masui, A. Tezuka
• Architectural design space exploration of cyber-physical systems using the Functional
Modeling Compiler – A. Canedo; J.H. Richter
• A conceptual basis for inconsistency management in Model-Based Systems
Engineering – S.J.I. Herzig, C.J.J. Paredis
Sala Gonfalone
New Product Development
• Development of a model for evaluating the NPD process in SMEs: a latin american
experience –M.C. Hernandez, M. Velásquez Montoya, J.F. Martínez
• Engineering and design best practices in new product development: an empirical
research – M. Rossi, E. Kerga, M. Taisch, S. Terzi
• Supporting globally distributed product development with a new validation concept –
A. Albers, Y. You, S. Klingler, M. Behrendt, T. Zhang, K. Song
• Information management in product development workflows: a novel approach on the
basis of pseudonymization of product information – D. Gerhard, G. Reinauer, A.
Krumboeck, R. Ljuhar
• Feasibility studies in the product development process - K. Bause, A. Radimersky, M.
Iwanicki, A. Albers
• Application and validation of the matrix-based product description in a case study by
using the software Loomeo – T. Luft,N. Ewringmann, S. Wartzack
Sala Eventi
Eco/Sustainable Design
• Influence of environmental European product policies on product design: current
status and future developments – M. Calero Pastor, F. Mathieux, D. Brissaud
• Methodical approach for rough energy assessment and compliance checking of energyrelated product design options – M. Abramovici, A. Quezada, T. Schindler
• Identifying the requirements for a knowledge-sharing platform in ecodesign – Y.
Baouch, F. Pourroy, P. Zwolinski, D. Brissaud
• Ecodesign for production plants – P. Stoffels,M. Vielhaber
• Computation and visualization of patch geometries for the design of carbon fiber
reinforced parts at early design stages – D.Klein, K. Scheler, S. Wartzack
• Discontinuous phenomena of holonic design: functional completeness versus solution
completeness – H. Issa, E. Ostrosi, M. Lenczner, R. Habib
Monday, April 14th
04:00 pm – 06:00 pm
Sala Pirelli
Complex Systems Architecting
• Teaching conceptual modeling at multiple system levels using multiple views– G.
Muller
• A smart home information management model for device interoperability simulation–
A. Capitanelli, A. Papetti, M. Peruzzini, M. Germani
• How to consider emotional reactions of the driver within the development of Advanced
Driver Assistance Systems (ADAS)? – M. Auricht, R. Stark
• Panel discussion on “Complex Systems Architecting issues and outlooks”
Speakers: R. Stark, G. Muller, P. Möller, R. Dumitrescu, M. Bonnema (proposer), T.
Tomiyama (moderator)
Sala Gonfalone
Life Cycle Engineering
• Stages in product lifecycle: trans-disciplinary design context - A.J. Qureshi, K. Gericke,
L. Blessing
• Networked design decisions in balanced life cycles – J. de Lange, E.J. OudeLuttikhuis, E.
Lutters
• Functionality of structured models on supporting management of design processes: a
two-phase integrated framework – M. Hassannezhad, M. Cantamessa
• Advancing development of product-service systems using ideas from functional
product development – D. Sas, J. Lindström
• From product development to technology development – M. Bitzer, M. Vielhaber, F.
Dohr
• Product development vs. Production development – M. Vielhaber, P. Stoffels
Sala Eventi
Perceived Quality and Requirements Management
• Quantitative analysis of the consumer perceived value deviation – P. Amini, B. Falk, R.
Schmitt
• Altering the mapping between structures and functions to modify users' perspective D. Gabelloni, R. Campolmi, G. Fantoni
• Ordering the chaos: a guided translation of needs into product requirements – G.
Montelisciani, D. Gabelloni, G. Fantoni, E.G. Calgaro, C. Taviani
• Platform of design method for developing mobility-preserving products –K. Paetzold, S.
Wartzack, D. Krause
Tuesday, April 15th
09:00 am – 12:40 am
Auditorium Giorgio Gaber
Plenary Session: Industrial Perspective Workshop
Co-Chaired by A. Cantarutti (AITeM/Advantech) and F. Rusinà (Comau)
Welcome
S. Scaglia (AFIL), L. De Puppi (Confindustria)
Industrial Engineering Design Virtualization
A. Cantarutti (AITeM/Advantech)
Industrial Perspective Part I
D. Cannoletta (Alenia Aermacchi), M. Tabasso (Electrolux), N. Marcucci (GE-Oil & Gas)
Industrial Perspective Part II
L. Vendrame (GE-Avio), F. Rusinà (Comau), H. Szigeti (Dassault Systemes),
A. Condrino (Advantech-EKA)
Conclusion and Wrap-up
F. Rusinà (Comau)
Tuesday, April 15th
01:50 pm – 03:50 pm
Sala Pirelli
ConsumActors: New design and production chains for personalized goods
• An example of visually supported design of modular product families –N. Gebhardt, T.
Bahns,D. Krause
• Forward variance planning and modeling of multi-variant products – P.C. Gembarski, R.
Lachmayer
• A DSM cladistics model for product family architecture design - T. AlGeddawy
• How the next generation of products pushes to rethink the role of users and designers
–G. Montelisciani, D. Mazzei, G. Fantoni
• Exchange of knowledge in customized product development processes – P. Klein,D.
Pugliese, J. Lützenberger, G. Colombo, K.D. Thoben,
Sala Gonfalone
Machine and Mechatronic Design
• Formalized description of a framework for simulation-based mechatronic design – F.
Dohr, M. Vielhaber
• Global optimization and design of dynamic absorbers for chatter suppression in milling
process with tool wear and process damping – N.A. Saadabad, H. Moradi, G. Vossoughi
• Analysis of vibration damping in machine tools –G. Bianchi, S. Cagna, N. Cau, F. Paolucci
• Gripping device for heavy and deformable materials handling: concept, design,
selection and test – J. Tilli, A. Brando, G. Fantoni
• Design of a single DOF gripper based on four-bar and slider-crank mechanism for
educational purposes – A. Hassan, M. Abomoharam
• The Karlsruhe SysKIT approach: a three-step SysML teaching approach for
mechatronic students – S. Matthiesen, S. Schmidt, G. Moeser, F. Munker
Sala Eventi
Design Tools and Techniques
• Car styling: a CAD approach to identify, extract and interpret characteristic lines – J.B.
Bluntzer, E. Ostrosi, J.C. Sagot
• Rationalizing virtual reality based on manufacturing paradigms – R. Damgrave, E.
Lutters, J.W. Drukker
• Toward a methodological knowledge based approach for partial automation of reverse
engineering - M.I. Ouamer Ali, F. Laroche, A. Bernard, S. Remy
• Development of a technology-based design environment focused on improving user
experience – D. Ríos-Zapata, G. Osorio-Gómez, R. Mejía-Gutiérrez
• Mechatronic design process: a survey of product data model –C. Zheng, M. Bricogne,J.
Le Duigou, B. Eynard
• First step toward a quantitative approach to evaluate collaborative tools – D. Fleche,
J.B. Bluntzer, M. Mahdjoub, J.C. Sagot
Tuesday, April 15th
04:20 pm – 06:00 pm
Sala Pirelli
ConsumActors: New design and production chains for personalized goods
• Case study: mass customization of individualized orthotics - the FASHION-ABLE virtual
development and production framework - C. Kaiser, T.V. Fischer, T. Schmeltzpfenning,
M. Stöhr, A. Artschwager
• Design for disability: integration of human factor for the design of an electromechanical drum stick system –J. Coton, M. deGois Pinto, J. Veytizou,G. Thomann
• Platform architecture empowering health and safe product service systems for specific
target groups – G. Landolfi, M. Alge, A. Bettoni, L. Canetta, P. Pedrazzoli,D. Corti
• Knowledge capturing and reuse to support manufacturing of customised products: a
case study from the mould making industry – D. Mourtzis, M. Doukas
Sala Gonfalone
Assembly Engineering
• Multi-robot spot-welding cell design: problem formalization and proposed architecture
- S. Pellegrinelli, N. Pedrocchi, L. Molinari Tosatti, A. Fischer, T. Tolio
• Method for supporting the selection of robot grippers – G. Fantoni, S. Capiferri, J. Tilli
• An approach to analytically evaluate the product disassemblability during the design
process – M. Germani, M. Mandolini, M. Marconi, M. Rossi
• Integrating design for assembly guidelines in packaging design with a context-based
approach – P. Betancur-Muñoz, G. Osorio-Gómez, J.F. Martínez-Cadavid, J.F. DuqueLombana
• Project-led education in packaging development and management – E.J.
OudeLuttikhuis, J. de Lange, R. ten Klooster, E. Lutters
Sala Eventi
Design Tools and Tolerancing
• Accuracy improvement of hybrid motion capture based real time virtual validation – J.
Bönig, C. Fischer, H. Weckend, F. Döbereiner, J. Franke
• Towards early estimation of part accuracy in additive manufacturing – G. Moroni,
Wahyudin P. Syam, S. Petrò
• Variation analysis in collaborative engineering: an industrial case study of rocket
motor development – L. Krogstie, A. Gaarder, B. Andersen
• How can computer aided tolerancing support closed loop tolerance engineering? – B.
Schleich, S. Wartzack
• On knowledge-based development: how documentation practice represents a strategy
for closing tolerance engineering loops –L. Krogstie, S. Ulonska, T. Welo, B. Andersen
Wednesday, April 16th
08:30 am – 09:50 am
Sala Pirelli
Zero Defect Manufacturing
• Multi-sensor multi-resolution data fusion modeling – D. Tansky, A. Fischer, B.M.
Colosimo, L. Pagani, Y.B. Shabat
• Design and evaluation of in-line product repair strategies for defect reduction in the
production of electric drives – M. Colledani, D. Coupek, A. Verl, J. Aichele, A. Yemane
• Root cause analysis of product service failures in design: a closed-loop lifecycle
modelling approach – A. Pal, P. Franciosa, D. Ceglarek
• Corporate and customer understanding of core values regarding perceived quality:
case studies on Volvo Car Group and Volvo Group Truck Technology –K. Stylidis, S.
Hoffenson, C. Wickman, M. Söderman, R. Söderberg
Sala Gonfalone
Smart Product Engineering
• Make-to-XGrade for the design and manufacture of flexible, adaptive and reactive
products – A. Mehrsai, B. Henriksen, C.C. Røstad, K.A. Hribernik, K.D. Thoben
• Stabilizing new-product development processes – a prerequisite or a barrier to satisfy
customer wants and needs? – G. Ringen, T. Welo
• Qualitative comparison of requirements elicitation techniques that are used to collect
feedback information about product use – S. Wellsandt, K. Hribernik, K.D. Thoben
• Holistic approach for secondary weight improvements –T. Luedeke, M.Vielhaber
Sala Eventi
Creative and Inventive Design
• Adaption of the TRIZ method to the development of electric energy storage systems - A.
Albers, D. Wagner, L. Kern, T. Höfler
• Innovation through pertinent patents research based on physical phenomena involved
- U.Valverde, J.P. Nadeau, D. Scaravetti, J.F. Leon
• A new framework of ideation-oriented customer involvement – A. Liu, S. Lu, W. Wei
• How should requirements be defined to have real innovation? – F. Montagna
Wednesday, April 16th
10:10 am – 11:30 am
Sala Pirelli
Zero Defect Manufacturing
• Transfer function of assembly process with compliant non-ideal parts – A. Das, P.
Franciosa, P.K.S. Prakash, D. Ceglarek
• Adaptive fixturing system for the smart and flexible positioning of large volume
workpieces in the wind-power sector –E. Olaiz, J. Zulaika, F. Veiga, M. Puerto, A.
Gorrotxategi
• Robust design of fixture configuration – G. Moroni, S. Petrò, W. Polini
• Error detection and correction methodology for quality assurance on laser milled
geometries – I. Llanos, A. Agirre, H. Urreta
Sala Gonfalone
Additive Manufacturing
• Direct fabrication of joints based on direct metal laser sintering in aluminum and
titanium alloys – F. Calignano, D. Manfredi, E. P. Ambrosio, S. Biamino,M. Pavese, P.
Fino
• Design of adaptive porous micro-structures for additive manufacturing –Y.B. Shabat, A.
Fischer
• Design for additive manufacturing: supporting the substitution of components in series
products – C. Klahn, B. Leutenecker, M. Meboldt
• Evaluating the design for additive manufacturing: a process planning perspective – Y.
Zhang, A. Bernard, R.K. Gupta, R. Harik
Sala Eventi
Innovation Management
• The role of in-house intermediaries in innovation management: optimization of
technology transfer processes from cross-industry – A. Albers, N. Bursac, L. Maul, M.
Mair
• The role of early prototypes in concept development: insights from the automotive
industry –C.W. Elverum, T. Welo
• Critical review of multi-criteria decision aid methods in conceptual design phases:
application to the development of a solar collector structure – M. El Amine, J. Pailhes, N.
Perry
• Smart deployment of demonstrators into successful commercial solutions – S. Brad, M.
Fulea, E. Brad, B. Mocan
Wednesday, April 16th
11:30 am – 12:00 am
Sala Pirelli
Plenary Session - Conference Closing
Co-Chaired by G. Moroni (Politecnico di Milano) and T. Tolio (ITIA-CNR)

Download Report