Water Softeners Commercial Water Softeners Series LC-150 ® Water Softeners Watts Series LC-150 water softeners are suitable for commercial applications ranging from 60,000 to 300,000 grains of hardness removal capacity at flow rates up to 55 gpm (208 lpm). Series LC-150 Operation of the Softener Control Valve Hard water contains dissolved minerals in the form of Calcium (Ca), Magnesium (Mg), and Iron (Fe). An ion exchange process accomplishes the removal of these minerals. Over a period of time, the resin will become exhausted, and the softener will regenerate using a brine solution. The 1.5" brass control valve operates on command from the electronic valve controller. Valve positioning is accomplished by a hydraulically balanced piston which glides effortlessly along non-corrosive spacers and seals to precise locations. This precision motor driven valve performs in the toughest applications, is WQA certified to NSF/ANSI standard 61 and ANNEX "G", and is made of high-quality brass for a long reliable life. Softening Media The exchange media is a high-quality strong acid softener (cation) resin, WQA certified to NSF/ANSI Standard 61 with high whole bead count, no color throw, and is chlorine resistant. The media combines high-operating capacity with excellent chemical and physical stability for a long dependable life. Resin Tanks All models feature non-corrosive fiberglass tanks with a thermoplastic inner liner. All tanks are certified by WQA or NSF to NSF/ANSI standards. Regeneration Controller Brine System These softeners feature an electronic controller that combines simplicity with flexibility in a user-friendly package that is easy to setup and operate. A turbine flow meter provides accurate flow measurement and allows for efficient operation. Important operational information is stored in the timer which can be accessed for trouble shooting purposes. The brine tank is made of tough, high-density polyethylene, and features a grid plate for increased brine storage. Brine tanks 18-24" in diameter feature a grid plate for increased brine storage. A high-quality air check prevents air from entering the system. ! WARNING Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. watts.com Water Softeners Commercial Water Softeners Specifications Model NUMBER M4210B-285NT M4214B-285NT M4218B-285NT M4222B-285NT M4226B-285NT M4230B-285NT Mineral Tank Brine Tank Tank SIZE (IN.) Resin Ft³ Gravel #20 12x52 14x65 16x65 18x65 21x62 24x72 2.0 3.0 4.0 5.0 7.0 10.0 30 lbs. 60 lbs. 80 lbs. 100 lbs. 100 lbs. 200 lbs. Tank SALT SIZE (IN.) FILL (LBS.) 18x40 18x40 18x40 24x41 24x50 30x50 400 400 400 600 800 1400 Softening Capacity Lbs. Salt Per Regeneration Flow Rate & Pressure MAX MIN MAX MIN serv gpm 60 K 90 K 120 K 150 K 210 K 300 K 40 K 60 K 80 K 100 K 140 K 200 K 30 45 60 75 105 150 12 18 24 30 42 60 15/20 17/22 25/40 30/50 35/53 40/55 drop psi bkw gpm 15/25 15/25 15/25 15/25 15/25 15/25 3.5 5.0 7.0 11.0 13.0 15.0 Ordering Information Model NUMBER M4210B-285NT M4214B-285NT M4218B-285NT M4222B-285NT M4226B-285NT M4230B-285NT Description 2 Cubic Foot Simplex Softener with Flow Meter 3 Cubic Foot Simplex Softener with Flow Meter 4 Cubic Foot Simplex Softener with Flow Meter 5 Cubic Foot Simplex Softener with Flow Meter 7 Cubic Foot Simplex Softener with Flow Meter 10 Cubic Foot Simplex Softener with Flow Meter Pipe Size 1.5" 1.5" 1.5" 1.5" 1.5" 1.5" Space Required D X W X H (IN.) LBS. Weight kgs. 18 x 42 x 75 18 x 44 x 87 18 x 46 x 87 24 x 50 x 87 24 x 52 x 84 39 x 60 x 96 210 240 320 380 585 710 95 109 145 172 265 322 NOTICE • Capacities are based on resin manufacturer’s data and are dependent upon influent water TDS, temperature, bed depth, and flow rates. Feed water must be free of oil and color. • Pipe size, tank size, and space requirements are in inches. • Flow rates listed at 25 psi drops are for intermittent peak flow rates and are not to be used as continuous flows. A Watts Water Technologies Company S-WQ-LC-150 1441 USA: Tel: (800) 659-8400 • Fax: (800) 659-8402 • Watts.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com © 2014 Watts
© Copyright 2024 ExpyDoc