External Information Points (EIP) This is the post deployment message and describes the scope which Openreach delivered as part of EMP R2700, delivered on 22 November 2014. As with previous releases, the deployment of any functionality shown below is dependent on successful completion of our testing activities. • NGA • Ethernet • Copper Details of the changes for each product are as follows: NGA Reference ID Products Change description OR- 19737 GEA-FTTC Consumer Switching GEA-FTTC Following this change the new NoT (Notice of Transfer) process for consumer switching will be in place for GEA-FTTC, but not yet activated with no changes 'in live' until the switchover date (targeted 20th June 2015). Key features of this process for GEAFTTC are RID (Retailer ID: currently RIDs are optional for GEAFTTC), minimum 10 working day lead time and use of the “cancel other” functionality on migration orders, and mandatory postcode telephone number/service ID matching for all provide orders (with the exception of Simultaneous Provide). The GEA-FTTC process will be available to test in the CVF (Customer Verification Facility) but will not be switched on in “live” EMP until 20 June 2015 when industry moves to the new process. OR-17871 All Products OR-20573 All Products Uplift of address management systems to support Unique Property Reference Number, Eastings/Northings, Latitude and Longitude Improvements to address matching capability phase 2 - Addition of Site Classifications This development provides the capability for CPs to search the Reference ID Products Change description OR-22652 GEA-FTTC ORCE-61382 SMPF, GEA-FTTC address using site classifications that will include BT Telephone Exchange and a range of other agreed values contained within Address Base Premium. GEA-FTTC: Allow the Service test to be run when service status is "In Course of Cease" SIM2 Working Line Takeover – Cessation Reason to Broadband CP Not Product Specific Clarification of the Cessation Reason in a Managed Cease order sent to the losing Broadband CP (either SMPF or GEA-FTTC) as part of a SIM2 Working Line Takeover. Removal of login box on Openreach landing page OR-22386 Openreach Portal only change - remove login box from the middle of the page – retain standard login from the top menu Ethernet Reference ID Products Change description OR-20555 EAD ECC Fixed Fee Implementation on EMP This change supports the implementation of the ECC Fixed Fee pricing structure on the EMP platform and replaces the ECC Banding approval structure with a CP determined amount. OR-21045 EAD Differentiated Planning Lead Times Delivers configurable date range functionality for Network Design stage of EAD L2C journey and provides new fields to manage this within the EMP KCI structure. OR-21053 EAD Appointing KCI Creating additional KCI’s associated with booking and confirming appointments so that CPs are kept better informed during the circuit provisioning journey. OR-16816 Ethernet Network Visibility Infrastructure Discovery: Phase 1 Strategic EMP development through Portal and Web-services providing visibility of Ethernet network inventory – T Nodes, Y codes, duct – around a location point, including an indication of capacity at nodes. Deployed but ‘switched -off’ due to issues identified during testing OR-17871 All Products Uplift of address management systems to support Unique Property Reference Number, Eastings/Northings, Latitude and Longitude Reference ID Products Change description OR-20573 All Products Improvements to address matching capability phase 2 - Addition of Site Classifications This development provides the capability for CPs to search the address using site classifications that will include BT Telephone Exchange and a range of other agreed values contained within Address Base Premium. OR-22386 Not Product Specific Removal of login box on Openreach landing page Openreach Portal only change - remove login box from the middle of the page – retain standard login from the top menu Copper Reference ID Products Change description OR-22828 MPF, SMPF Re-start MPF and SMPF using LIJ LLU MPF This is a development of three new products for MPF Start of Stopped Line, MPF Working Line Takeover (WLTO) and SMPF provide where they are delivered re-using Left in Jumpers (LIJs) and no engineering work is required Consumer Switching New Cancel Other codes live WLR PSTN New MPF switching process available to test in CVF Consumer Switching- New Cancel Other codes live OR-19734 OR-19709 OR-15375 WLR3 (PSTN basic, ISDN2 and ISDN30) SMPF and MPF New WLR3 switching process available to test in CVF Business 2 Plus Provision of capability for CPs to order enhanced maintenance level above Service Maintenance Level 2, but below Service Maintenance Level 3 being made available on WLR3, LLU products (further details of the SLA and exclusions provided via separate product documentation). Service Maintenance Level 2+ will be available for CPs to opt into as a bolt-on on a line by line basis for WLR3 (PSTN basic, ISDN2 and ISDN30) SMPF and MPF as required from launch for a one off charge for the year. OR-17871 All Products OR-20573 All Products Uplift of address management systems to support Unique Property Reference Number, Eastings/Northings, Latitude and Longitude Improvements to address matching capability phase 2 - Addition of Site Classifications Reference ID Products Change description ORCE-61382 SMPF, GEA-FTTC This development provides the capability for CPs to search the address using site classifications that will include BT Telephone Exchange and a range of other agreed values contained within Address Base Premium. SIM2 Working Line Takeover – Cessation Reason to Broadband CP OR-22386 Clarification of the Cessation Reason in a Managed Cease order sent to the losing Broadband CP (either SMPF or GEA-FTTC) as part of a SIM2 Working Line Takeover. Not Product Specific Removal of login box on Openreach landing page OR-22799 Openreach Portal only change - remove login box from the middle of the page – retain standard login from the top menu Enable MLPA codes 2451/2452 & 2453 to be returned to CP WLR3 PSTN, ISDN2, ISDN30, MPF, SMPF Enhancement to the Line Availability (MLPA) Dialogue Service to support new sites CPs will also be advised via formal planned outage notifications of the planned downtime as the new services are being implemented on EMP. For further information please contact your Sales & Relationship Manager. Please do not forward, republish or permit unauthorised access. The content is accurate at the time of writing and is subject to change.
© Copyright 2024 ExpyDoc
