hiX 5600 CXU_G11

hiX 5600 CXU_G11
Central Management, Switching and Uplink Unit
Product Features
n Four
1GE and two 10GE
optical network interfaces
n Extended
n 32k
controller performance
MAC Addresses
n Support
of 4K VLAN
n Support
of MPLS with two labels
n Support
of Ethernet OAM via
ITU-T Y.1731 and IEEE 802.3ah
n Enhanced
VLAN mapping: VLAN
translation based on MAC, subnet,
protocol and port
n DHCP
support with option 82
n Internet
Group Management
Protocol (IGMP) proxy
n Supports
Simple Network
Management Protocol (SNMP)
n Internal
clocking with
4.6 ppm accuracy
n T3
clock input via PM_ONU_2G
n T4
clock output
n Clock
recovering by synchronous
Ethernet on all uplink ports
n Managed
by Element
Management System ACI-E
For Carriers, who are seeking for
ultra-performance of the hiX 5600 system
by extended switching capacity, 10 GE
uplinks and special features like MPLS.
The ADTRAN hiX 5600 central switching
unit CXU_G11 provides the central management, switching and uplink functionality of the
hiX 5600 shelf system. In the center of the star
backplane architecture of the shelf, the CXU unit
is the most important device in a hiX 5600 shelf
system, therefore the star architecture is doubled
on the backplane and a redundant CXU is
pluggable in most shelf systems.
The CXU_G11 provides four 1GE and
two 10GE uplink ports. Its enhanced switching
capacity enables the hiX 5600 for ultra-broadband (> 100 Mbps) applications by using fiber
GE line cards or high performance vectoring
VDSL2 line cards.
Increased controller performance and the
more in RAM memory of the CXU_G11 offers
new shelf central services, like MPLS or Ethernet
OAM via ITU-T Y.1731 and IEEE 802.3ah. MPLS
is used directly at the uplinks of the hiX 5600,
which opens new virtual traffic routing options
of services by two labels on top of VLAN routing.
The detection of network failures is supported
by Ethernet OAM according to IEEE 802.3ah
as well as according to ITU-T Y.1731. Network
failure detection is supported on service layer,
which allows the identification of interruptions
and faulty connections over all Ethernet network
segments and nodes used by one service.
This simplifies error detection to subscriber
service view and lowers down operators’
maintenance costs.
The synchronisation clock can be recovered
from each of the four GE or two 10GE uplink
ports via synchronous Ethernet. Also a T3
clock input is possible via the power module
PM_ONU_2G. The onboard oscillator has an
accuracy of 4.6 ppm for good clock holdover
performance in case of missing synchronisation
clock source. The clock is distributed to the line
cards with 8 kHz NTR signal, which can be
forwarded to the DSL ports. With the extra T4
clock output located at the CXU_G11 the clock
signal can also be provided to external devices.
The controller core of the CXU provides
important functions to the hiX 5600 system, like
initialisation and configuration of all components
of the shelf, HW and SW maintenance, collection
of performance and line-test data, remote
inventory and many more.
The hiX 5600 MSAN supports a wide variety
of management options. Like all CXUs of the
hiX5600 series, the CXU_G11 has a Fast Ethernet
port for local management and a serial CLI
interface for service access. The common network
management interface can be configured in-band
within an uplink port separated by a special
VLAN from normal traffic or physically separated
on the Fast Ethernet port depending on the
provider’s network security concept.
The CXU_G11 central switching unit
supports IGMP proxy and snooping for
effective downstream traffic distribution of
streaming services like IPTV.
Environmentally hardened, the CXU_G11
central switching unit can be installed in both
Central Office (CO) and Remote Terminal (RT)
environments.
ADTRAN, Inc.
International Department
U.S. Headquarters
901 Explorer Boulevard
Huntsville, Alabama 35806
www.adtran.com/global
+1 256 963 8000
+1 256 963 6300 fax
[email protected]
International Customer Service
+1 256 963 8716
Headquarters—EMEA
ADTRAN GmbH
Erika-Mann-Str. 25
80636 Munich-Germany
+49 89 411097 111
[email protected]
Central-/East and West Europe
+49 89 411097 111
[email protected]
South Europe
+49 89 411097 111
[email protected]
North Europe and CIS
+49 89 411097 111
[email protected]
Middle East and Africa
+49 89 411097 111
[email protected]
Asia
+852 3187 7111
[email protected]
Australia/New Zealand
+61 3 9658 0500
[email protected]
Mexico and Central America
+1 256 963 3321
+1 52 55 5280 0265 Mexico
[email protected]
South America
+1 256 963 3185
[email protected]
[email protected]
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier.
I611321048F1-8A November
Copyright © 2014 ADTRAN, Inc.
All rights reserved.
hiX 5600 CXU_G11
Central Management, Switching and Uplink Unit
Product Specifications
Mechanical
nDimensions:
(H x W x D)
390 mm x 25 mm x 235 mm
Interfaces
n2
x 10 GE Uplink Ports (XFP)
x 1 GE Uplink Ports (SFP)
nT3 Clock Input via PM_ONU_2G
nT4 Clock Output
n2 x 1/2.5/10 Gbit/s Backplane Interface
n12 x 1/2.5 Gbit/s Backplane Interface
n4
Capacities
n108
Gbps Switching Capacity
Gbps Switching Capacity (Full-duplex)
n14 Line Cards per hiX 5635 Chassis
nSupport of 30 Multicast Providers
nSupport of 16k MC Groups
n4k Simultaneous Active MC Channels
n32k MAC Addresses
n2 MPLS Label
n30 Virtual Bridge Instances (VFI) for VPLS
n500 VPWS
n216
Regulatory Standards
nETSI
EN 300 019
nETS 300 753
nDTAG TS 0364/96
nETSI EN 300 386
nDTAG 1TR9
nETS ES 201 468
nETS ES 203 215
nETSI EN 60950
nITU-T K.27/35
nITU-T K.20/45
(with External Over-voltage Protection)
Service Modes
nIEEE
802.3ah In-band Management Channel
Management via LCT FE Port
n1:1 Hot Standby CXU Redundancy
nSupport of IGMP v2/v3
nIGMP Proxy and Snooping
nMPLS-Virtual Private LAN Service (VPLS)
nMPLS-Virtual Private Wire Service (VPWS)
nOut-band
Environmental
Temperature: -40° C to +70° C
Temperature: -40° C to +70° C
nRelative Humidity: Up to 95% at 50° C,
Non-condensing
nOperating
nStorage
Management
nACI-E
as EMS
Management via SNMP
nEthernet Interface on CXU for SNMP and Telnet
nCraft Interface on CXU RS232 Serial Interface
nRemote
Ordering Information
Equipment
CXU_G11
ADTRAN believes the information in this publication to be accurate as of publication date, and is not responsible for error. Specifications subject to
change without notice. ADTRAN is a registered trademark of ADTRAN, Inc. and its affiliates in various countries. All other trademarks mentioned in
this document are the property of their respective owners.
ADTRAN warranty duration and entitlements vary by product and geography. For specific warranty information, visit www.adtran.com/warranty
ADTRAN products may be subject to U.S. export controls and other trade restrictions. Any export, re-export, or transfer of the products contrary to
law is prohibited. For more information regarding ADTRAN’s export license, please visit www.adtran.com/exportlicense
Part No.
11321048F1