CONTI CAFS WR 15 - DLS 400/1200

CONTI CAFS WR 15 - DLS 400/1200
for the universal application
Description
This compressed air foam system provides a reliable and modern extinguishing system for your fire fighting
vehicle. In operation it primarily impresses with the highest degree of extinguishing efficiency for the most
diverse of emergency scenarios, as well as with its simple operability and safe applicability. Additionally, it can
be individually adapted to your specific operational requirements thanks to its modular concept.
Benefits
Highly efficient CAFS firefighting equipment
▪ rapid extinguishing as well as excellent burn-back
safety thanks to the powerful and sustained cooling
and suffocation effects of the CAFS foam
▪ multiplication of available extinguishing capacity
through active foam expansion via compressed air
increases the tactical operational value of the fire
fighting vehicle
▪ targeted, precise extinguishing process using the
CAFS foam as an indicator for hot spots
▪ good visibility thanks to minimal build-up of
water vapour from the CAFS foam during flame
penetration
▪ minimal extinguishing agent and fire damage
thanks to low water consumption and short
extinguishing time
A wide range of application types
▪ direct fighting of class A and B fires with wet CAFS
foam
▪ prophylactic backfire protection by covering the
object that is on fire with dry CAFS foam
▪ preventive protection of objects at risk of fire
through the application of dry CAFS foam
Large and safe action radius
▪ high degree of mobility during extinguishing thanks
particularly light hoses as well as the outstanding
delivery height and delivery length
▪ largest possible distance to the seat of the fire
thanks to a throw range of approx. 35 m (114 ft)
and a throw height of approx. 23 m (75 ft)
User-friendly operation
▪ simple and error-free operation of the compressed
air foam system via LCS 2.0 control panel
Customized solutions
▪ use of any built-in pump and the DIGIMATIC foam
pressure proportioning system
▪ choose from a large variety of different systems to
produce compressed air
▪ individual positioning of the CAFS pressure outlet
▪ optional selection of additional CAFS outlets for the
hose reel and turret
CONTI CAFS WR 15 - DLS 400/1200
for the universal application
Built-in compressed air foam system
Operation via LCS 2.0 control panel
Technical data - Compressed air foam system
Standard
design according to EN 16327 (DLS 400/1200)
CAFS foam quantity
Expansion ratio
1
2
approx. 1.600 l/min (422,7 gal/min)
approx. 4 (wet foam) - 15 (dry foam)
Technical data - Compressed air supply
Compressor drive
Belt driven
Hydraulic driven
Electric driven
Screw compressor
Kaeser SIGMA 12
Rotorcomp EVO2
Rotorcomp EVO6-NK-G
Performance
approx. 7 kW
approx. 29 kW
approx. 21 kW
Revolutions
approx. 1.750 u/min
approx. 4.500 u/min
approx. 3.400 u/min
Amount of air
approx. 1.300 l/min
(343.4 gal/min) at 7 bar
(101.5 psi)
approx. 1.200 l/min
(317,0 gal/min) with 12 bar
(174,1 psi)
approx. 1.900 l/min
(501.9 gal/min) with 12 bar
(174,1 psi)
Lubrication
oil
Cooling
oil / water - plate heat exchanger
Technical data - Fixed pipe work
Type of construction
1 x CAFS pressure outlet with a MK400
CAFS pressure outlet
1 x AG 2"
Flow rate (CAFS mode) 1
1 x approx. 70 - 400 l/min (18,5 - 105,7 gal/min) at 7 bar (101,5 psi)
Flow rate (Water mode)
1 x approx. 1.000 l/min (264,2 gal/min) at 7 bar (101,5 psi)
Optional CAFS outlets
1
Depending on expansion ratio set
2
Depending on foam compound used
▪ 1 x CAFS hose reel outlet AG 1½" per proportioning chamber
▪ 1 x CAFS turret outlet NW 65
Contact
Rosenbauer International AG
Paschinger Straße 90
4060 Leonding, Austria
Tel.: +43 732 6794-0
Fax: +43 732 6794-91
www.rosenbauer.com
www.facebook.com/rosenbauergroup
Text and images non-binding. The images may depict special editions that are only available at an additional charge.
Subject to change due to technical advances.
PC342
2014-12_PKra

Download Report