09/2014 O FLEXIBLE B U T R S PFEIFER SEIL- UND HEBETECHNIK GMBH List of Material Rope Courses DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31- 937-267 TELEFAX +49 (0) 83 31- 937-341 E-MAIL [email protected] INTERNET www.pfeifer.de PFEIFER-List of Material Rope Courses – Special products for a safe and economical operation of rope courses Based on our year long experience by supplying rope courses we set up the following list of material. The listed products are proving themself since years in several rope courses under all sorts of conditions worldwide. ! Flying-Fox-/Zipline-Ropes new Special Rope PN116/7 ire surface: galvanized W Class B, dry Minimum Breaking Force: 69.8 kN Nominal Tensile Strength: 1960 N/mm² Lay direction: Ordinary lay Right hand Product advantages • Non-twisting • Resistant against lateral pressure Special Rope P355 ire surface: galvanized class B W Minimum Breanking Force: 136,95 kN Nominal Tensile Strength: 1960 N/mm² Lay direction: Ordinary lay, Right hand Rope- Min. Breaking diameter Force Part-No. Rope- Min. Breaking diameter Force Part-No. 10 mm 69.80 159759 10 mm 99,29 235842 12 mm 100.00 251842 12 mm 140,75 235843 15 mm 210,65 238087 Product advantages • Robust •S tabel at bending cycles • Very less rolling noise if used as zip line • Dry • Galvanized class B List of Material Rope Courses 09/2014 FLEXIBLE S r further ns! ntact us fo Please co izes or constr uctio ,s rs te e m ia d O B T R U Life Line PFEIFER Fibre Ropes Polyamid Rope twisted IN EN 696 D Shape:A Diámetro nominal Polyamid Rope braided IN/EN 83307 D Shape: E Color: white Referencia-No. Rope diameter 12 mm 105460 16 mm 105474 20 mm 105488 24 mm 105500 8 mm 10 mm Part-No. 145219 163127 Duracord Finish: twisted 4-legs Finish: twisted 3-legs Rope diameter Part-No. Rope diameter Part-No. 169109 169108 20 mm 16 mm r further ns! ntact us fo Please co izes or constr uctio ,s rs te e m ia d Accessories Oval Ring Chain Fast Lock imension A: 13.0 mm D Dimension B: 60.0 mm Dimension C: 120.0 mm Finish: painted Working load Part-No. 112717 2500 kg Finish: Steel, galvanized B A C Round Steel Chain Short link in 30m coil DIN766 alvanized G True to gauge, tested Chain dimensions d x t: 8 x 24 mm Dimension D Part-No. 8 mm 150429 10 mm 151190 12 mm 154917 D G H Round Steel Chain Long link in 30m coil DIN766 d d alvanized G Dimensionally untested Chain dimensions d x t: 8 x 52 mm t Chains complying with this standardare used in the entire technical field. Chains for non-lifting applications e.g. bracing, fastening, closing off Part-No. Part-No. 201729 120580 Short link B Long link t r further ns! ntact us fo Please co izes or constr uctio ,s rs te e m ia d PFEIFER List of Material Rope Courses 09/2014 r further ns! ntact us fo Please co izes or constr uctio ,s rs te e m ia d Accessories Special thimble Thimble IN 6899 D Shape: BF Galvanised version c imension c: 45 mm D Dimension l: 72 mm Galvanised version Rope diameter Part-No. Rope diameter Part-No. 9 mm 111329 111577 11 mm 111330 Wire rope clamp cc. EN 13411-5 Type A A Galvanised version Nominal size Part-No. 6.5 mm 111776 10.0 mm 111781 12 mm I Wire rope clamp So Galvanised version Nominal size Part-No. 110985 13 mm Typ B auf Anfrage Swaged ferrule Shackle High-strength Made of aluminium EN 13411-3 A Nominal size Part-No. 111122 11 mm Turnbuckle with two forks and lock nuts igh-tensile version, galvanised H Bolt with nut WLL Part-No. 1000 kg 110728 2360 kg 110736 Wedge clamp Wedge chamber made of steel, St. 50 Steel wedge, quenched and tempered Steel plunger Surface-hardened Black paint finish max. WLL Rope diameter Part-No. 10 kN 5 – 10 mm 198559 20 kN 10.5 – 14 mm 198561 PFEIFER urved shape C Bolt with nut and split pin Stirrup hot-dip galvanised, bolt painted WLL Part-No. 2000 kg 181523 3250 kg 112005 Turnbuckle with two eyes and lock nuts High-tensile version, galvanised WLL Part-No. 540 kg 222789 1000 kg 237427 Polytex®lashing strap One-piece, pink Strap width Part-No. 25 mm 232002 Length: 0.3 m – 20 m flexibel Further colours and length on request. List of Material Rope Courses 09/2014 Accessories Polytex®- DH round sling Product advantages • High quality ith double protective sleeve W DIN 1492-2 Label can be covered • PU-imprigenated WLL Part-No. WLL Part-No. 2 t 122349 4 t 122375 Colour: green Colour: grey Length: 1.00 m; 1.25 m; 1.50 m; 1.75 m; 2.00 m; 2.25 m; 2.50 m; 2.75 m; 3.00 m; 4.00 m Length: 1.50 m; 1.75 m; 2.00 m; 2.25 m; 2.50 m; 2.75 m n Please co ! s n versio tact us fo r further Messmittel Rope caliper 40 Product advantages • Recommended for frequent measurement of ropes with the most common diameters up to 40 mm With attached wide jaws Galvanized steel Rope diameter Part.-No. 0 – 40 mm 246658 •H ighest abrasion and break resistance through measure plates made of hardened steel • Enables quick and easy check – wide jaws avoid measuring faults 7 Version • Stored in included hard-shell carrying case Measurement equipment case 75 Content: ope caliper 75 made of galvaR nized steel with attached wide jaws (see small picture) ecommended for the frequent R measuring of ropes in the most common diameters uitable groove gauges “Screw” S acc. mentioned rope diameter range Rope diameter Part-No. 5 – 28 mm 254854 5 – 60 mm 254853 ntact us Please co versions! for furthe Product advantages • Combine your own measurement equipment case according to your needs Version • Solid plastic case with manuals for rope caliper, groove gauges and wire ropes • Including a table with recommended size of the grooves for each rope diameter, based on ISO 4308 r List of Material Rope Courses 09/2014 PFEIFER Use our fast sevice and our professional guidance Just send a fax to +49 (0) 8331-937-341 or just send an E-Mail to [email protected] I would like to get an offer for: High Performance Rope P355 12 mm Part-No. 235843 High Performance Rope PN116/7 10 mm Part-No. 159759 40 0 – 40 mm Part-No. 246658 Measurement Equipment Case 75 5 – 28 mm Part-No. 254854 Measurement Equipment Case 75 5 – 60 mm Part-No. 254853 Caliper new! Please send me your current Complett-Catalogue. 09.14.pdf WA 269059 I would like to be called by an expert. Company Address Contact, Position Telephone Telefax PFEIFER SEIL- UND HEBETECHNIK GMBH E-Mail Date / Sign DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31- 937-267 TELEFAX +49 (0) 83 31- 937-341 E-MAIL [email protected] INTERNET www.pfeifer.de
© Copyright 2024 ExpyDoc
