Metrostone Application procedure

METROSTONE SYSTEM - APPLICATION PROCEDURE
NEW CONCRETE BASE - Application procedure on new and perfectly levelled concrete base
DAY
STEP
PRODUCT
TECHNIQUE
Metroresin Primer
Day 1
Apply Metroresin Primer with a Magritte Primer Roller, (diluted with 400% water)
1
Metrostone Cem
After 4 hours* proceed with the first coat of Metrostone Cem with a Stainless Steel Pollock Trowel
Day 2
2
Metrostone Cem
After 12 hours* proceed with the second coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying
a thin surface coat or the desired effect.
Day 5
3
Metrostone Matt
After at least 72 hours* apply two coats of Metrostone Matt transparent polyurethane finish with a Magritte
Primer Roller,
NEW CONCRETE BASE - Product consumption
On new and perfectly levelled
concrete base
1 m2
Metroresin Primer
0,130 l
Metrostone Cem
2 kg
Metrostone Matt
or
Metrofloor Gloss / Matt
0,30 kg
0,250 l
EXISTING FLOORS - Application procedure on pre-existing floors in ceramic, stone, hard surfaces and with difficult
adhesion, excluding parquet floors, linoleum and carpets which are to be removed
DAY
STEP
PRODUCT
TECHNIQUE
Metrostone Primer
Day 1
Apply Metroresin Primer with a Magritte Primer Roller, (diluted with 400% water)
1
Metrostone Level
After 4 hours* apply one coat of self-levelling concrete primer Metro Level with a Stainless Steel Kandinsky
Trowel and bed in the glassfibre mesh (Tessuto di Vetro or Armatex C1 IVAS) into the wet surface. After remove
any air with a Klee Bubble Breaking Roller.
Day 3
2
Metrostone Cem
After 48 hours* apply one coat of Metrostone Cem with a Stainless Steel Pollock Trowel.
Day 4
3
Metrostone Cem
After 24 hours* apply one coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying a thin surface
coat or the desired effect (see note).
Day 7
4
Metrostone Matt
After at least 72 hours* apply two coats of Metrostone Matt transparent polyurethane finish with a Magritte
Primer Roller.
EXISTING FLOORS On pre-existing floors in
ceramic, stone, hard surfaces
and with difficult adhesion,
excluding parquet floors,
linoleum and carpets
Product consumption
1 m2
Metrostone Primer
0,130 l
Metrostone Level
1,6 kg (per mm di spessore)
Tessuto di vetro (glassfibre mesh) or Armatex C1
1 m2
Metrostone Cem
2 kg
Metrostone Matt
or
Metrofloor Gloss / Matt
0,30 kg
0,250 l
DAMAGED CONCRETE BASE -
Application procedure on damaged and uneven concrete base (eg the necessary
removal of previous flooring such as parquet, linoleum and carpets)
DAY
STEP
PRODUCT
TECHNIQUE
Metroresin Primer
Apply Metroresin Primer with a Magritte Primer Roller, (diluted with 400% water)
1
Metrostone Level
After 4 hours* apply one coat of self-levelling concrete primer Metrostone Level with a Stainless Steel Kandinsky
Trowel and bed in the glassfibre mesh (Tessuto di Vetro or Armatex C1 IVAS) into the wet surface. After remove
any air with a Klee Bubble Breaking Roller.
Day 2
2
Metrostone Cem
After 48 hours* apply one coat of Metrostone Cem with a Stainless Steel Pollock Trowel.
Day 3
3
Metrostone Cem
After 24 hours* apply one coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying a thin surface
coat or the desired effect (see note).
Day 6
4
Metrostone Matt
After at least 72 hours* apply two coats of Metrostone Matt transparent polyurethane finish with a Magritte
Primer Roller.
Day 1
DAMAGED CONCRETE BASE -
On damaged and uneven concrete
base
1m
2
Product consumption
Metroresin Primer
0,13 lt
Metrostone Level
1,6 kg (per mm di spessore)
Tessuto di vetro (glassfibre mesh) or Armatex C1
1 m2
Metrostone Cem
2 kg
Metrostone Matt
or
Metrofloor Gloss / Matt
0,30 kg
0,250 l
NEW WALLS - Application procedure on new walls (plaster or similar)
DAY
STEP
PRODUCT
TECHNIQUE
Metrostone Primer
Day 1
Day 4
Apply Metrostone Primer with a Magritte Primer Roller, (diluted with 10% water)
1
Metrostone Cem
After 4 hours* proceed with one coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying a thin
surface coat or the desired effect.
2
Metrostone Matt
After at least 72 hours* apply two coats of Metrostone Matt transparent polyurethane finish with a Magritte
Primer Roller.
NEW WALLS - Product consumption
On new walls
(plaster or similar)
1 m2
Metrostone Primer
0,130 l
Metrostone Cem
1 kg
Metrostone Matt
or
Metrofloor Gloss / Matt
0,30 kg
0,250 l
EXISTING WALLS DAY
STEP
Procedure on pre-existing walls (in ceramic or similar)
PRODUCT
TECHNIQUE
Metrostone Primer
Day 1
Apply Metroresin Primer with a Magritte Primer Roller (diluted with 10% water)
1
Metrostone Cem
After 4 hours* proceed with one coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying a thin
surface coat or the desired effect.
Day 2
2
Metrostone Cem
After 24 hours* apply one coat of Metrostone Cem with a Stainless Steel Pollock Trowel, applying a thin surface
coat or the desired effect (see note).
Day 5
3
Metrostone Matt
After at least 72 hours* apply two coats of Metrostone Matt transparent polyurethane finish with a Magritte
Primer Roller.
EXISTING WALLS On pre-existing walls
(in ceramic or similar)
Procedure on pre-existing walls (in ceramic or similar)
1 m2
Metrostone Primer
0,130 l
Metrostone Cem
2 kg
Metrostone Matt
or
Metrofloor Gloss / Matt
0,30 kg
0,250 l
*Drying and application times may vary according to environmental working conditions.
N.B. For the need of extra wear resistance and water-resistance, it is possible to substitute the two coats of Metrostone Matt with two coats of Metrofloor Matt/Gloss applied with
a Magritte Primer Roller, 1 week after the application of the second coat of Metrostone Cem.
N.B. For Vintage Decapè effect, create a veined effect using a Woody Pad on the wet surface, then when dry glaze some areas with a Dalì Marine Sponge using Metropolis
decorative paints Hot Metal and Lady Vì.
This Technical Information Sheet is compiled to the best of our technical/scientific knowledge.
Nevertheless, it is not binding and does not imply that we are responsible, as the conditions of use are outside our control.
It is recommended that the product is always checked as being suitable for the specific application.
IVAS INDUSTRIA VERNICI S.p.A.
Via Bellaria, 40 - 47030 San Mauro Pascoli - FC - Italia - tel. +39 0541 815 811 - fax +39 0541 815 815
www.metropolis-ivas.com
Ediz. 03/2014