NECOWELTM FLE NECOWELTM Water emulsifiable copolymer resin based on fish oil and linseed oil Properties NECOWEL TM Technical data FLE is a water emulsifiable copolymer resin. TM In combination with non-ionic emulsifiers NECOWEL FLE can easily be emulsified without cosolvents and amines. The HLB value of 15,2 can be adjusted by appropriate emulsifiers. It is recommended to use ASK-Emulgator 5240 which is especially TM designed for this system. ASK Chemicals offers emulsified types of NECOWEL FLE in combination with certain sikkatives and additives. Solid content: 98 – 100 % Oil length: approx. 80 % Type of oil: Viscosity: linseed oil / fish oil 0.45 – 0.55 Pa.s, 25 °C TM Impregnations and varnishes based on NECOWEL FLE show very good weather resistance. Penetration and appearance are absolutely comparable with solvent based systems. Application • • • Wood impregnation Wood stains Wood varnishes Packaging and storage • • Packaging: 180 kg drum │ 900 kg IBC │ tank car Minimum shelf life: 12 months in closed original packaging Remarks Detailed health and safety information please find in the corresponding material safety data sheet. The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made without guarantee or representation as to results. We suggest your own laboratory tests prior to use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material. Reviewed October 2014 Resins & Specialties [email protected] ASK Chemicals GmbH | Reisholzstr. 16-18 | 40721 Hilden | Tel. +49 211 71103-0 | www.ask-chemicals.com TM NECOWEL NECOWELTM FLE NECOWELTM NECOWELTM Starting formulation Code No.: 8249 Wood preservative based on NECOWELTM FLE Composition Position Product Wt.% Supplier TM A NECOWEL FLE 20.00 ASK B ASK-Emulgator 5240 1.30 ASK C ASK-Drier 2005 0.40 ASK D Troysan Polyphase P 100 0.50 Troy-Chemie E Demin. water 50.00 F Optigel EXM 629, 1%ig in water 27.80 Rockwood 100.00 Procedure Charge A – D and mix homogeneously at 20 – 30 °C. Add component E very slowly and stir carefully. Add slowly component F (premix of water and Optigel EXM 629) and mix homogeneously. If available use Dispax-Reactor or Ultra Turrax for homogenization. Remarks As an alternative product NECOWEL FLE 55 FP can be used. TM This is an emulsified version of NECOWEL FLE which contains driers and 1 % Polyphase P 100 as fungicide. TM For further information about Polyphase P 100 please contact: Troy Chemie GmbH, Wunstorfer Str. 40, D-30926 Seelze. Resins & Specialties Resins & Specialties [email protected] [email protected] ASK Chemicals GmbH | Reisholzstr. 16-18 | 40721 Hilden | Tel. +49 211 71103-0 | www.ask-chemicals.com ASK Chemicals GmbH | Reisholzstr. 16-18 | 40721 Hilden | Tel. +49 211 71103-0 | www.ask-chemicals.com
© Copyright 2024 ExpyDoc