agr ident ABR200 – Mobile Reader Module Small size, great Power The new ABR200 OEM reader module is fully compatible to ISO11784 and 11785. With its small size, the adaption to Li-ION batteries and an additional USB interface it is perfectly suited for the integration into mobile devices like handhelds computers. Despite the compact size and the low power consumption it provides very good reading ranges for HDX and FDX transponders. The ABR200 already supports the new Advanced Transponders according to ISO14223. Agrident GmbH Steinklippenstraße 10 D- 30890 Barsinghausen Phone: +49 (0) 51 05-58 25 73-10 Fax: +49 (0) 51 05-58 25 73-17 E-Mail: mail@ agrident.com Internet: www.agrident.com www.agrident.com Advantages of ABR200 Technical Data of ABR200 The OEM reader module is fully compatible to the ISO standard ISO11784/11785 and thus reads HDX and FDX-B transponders. EM4002 (and compatible tags) can be read optionally and already supports the new Advanced Transponders according to ISO14223. Frequency 134.2 kHz Transponder types HDX and FDX-B compliant according to ISO11784/11785 Applicable for either 2.2 to 4.5V or 5V regulated Reading Range 100 mm Ferrite antenna (typical values) 25 cm with HDX transponders (30 mm Ø) 25 cm with FDX-B transponders (30 mm Ø) On-Board Step-Up-Converter eliminates the need for an external converter. Hence the module can be powered from batteries directly. 75 mm Ferrite antenna (typical values) 22 cm with HDX transponders (30 mm Ø) 22 cm with FDX-B transponders (30 mm Ø) Very low quiescent current when module is shut down (less than 4µA in 2.2-4.5V version and less than 1µA for 5V version) Small dimensions allow integration into various handheld devices Interfaces Easy communication via UART or USB, configurable UART baud rate (9600 to 115200 Bps) USB (CDC-ACM) Power Supply 5 GPIOs for indicating the reader status. Integrated Diagnosis Function (IDF) can help to make the implementation a lot easier. Wireless Sync. ensures the interference-free operation together with other readers in close vicinity UART at 3.3V level 5V – linear/stabilized/regulated/filtered 2.2 to 4.5V (Li-ION battery or 3NiMH cells in series) Power consumption 1.7 W max. when RF is activated 0.4 W max. when RF is not activated Factory tuned for antennas with an inductance of 275µH Depending on Input Voltage and Antenna Q PC-Demo-Software, SDK and Evaluation Kit available EVK200 Evaluation Kit Accessories for ABR200 EVK200 Evaluation Kit Antennas Air coil or ferrite with an inductance of 275 µH Operating Temp. 0 to 60° C, +32 to +140° Fahrenheit Storage Temp. -20 to 70° C, -4 to +176° Fahrenheit Dimensions L x W x H: 32.5 x 26 x 8 mm Weight Approx. 7g Approvals CE
© Copyright 2024 ExpyDoc
